Wiring up the Duet3 ToolBoard - How to Crimp
ฝัง
- เผยแพร่เมื่อ 6 มิ.ย. 2024
- Today we’re going to wire up the Duet 3 ToolBoard. It’s pretty
complicated, has a ton of crimp connectors of varyingly annoying sizes, all small.
Official Documentation:
duet3d.dozuki.com/Wiki/Duet_3...
Use that to make your cheat sheet pre-wiring :-)
I get most of my Duet (and E3D) hardware from filastruder.com - definitely check out if you're US/Canada, otherwise their official store: www.duet3d.com/
Support the project!
/ printshift
Check out our website!
printshift3d.com
Project GitHub - PrintShift is open source! Build along and make your Mini a proper factory!
github.com/paenian/PrintShift - วิทยาศาสตร์และเทคโนโลยี
Man, Duet really is enabling makers to make some truly insane machines with the Duet 3 board.
Thank you, im just building a voron 2.4 and need to crimp those, have a nice day :)
Is it compatible with Duet 3 Mini 5+?
Indeed it is; anything with a CAN-FD port can easily handle a toolboard.
@@PaulChase So can I Use this tool board In duet 2 wifi?
@@designteam-dbz5621 Duet 2 doesn't have the can bus built in, so I don't think so. Certainly not easily... You might be able to get a serial to can bus or something, but even then I don't think the firmware could handle the conversion or throughput
@@PaulChase Ok thankyou for the advice bro.