Never hold a piece of metal with your hand when drilling with a drill press if it gets caught it can spin the metal now you have a spining blade I've seen someone have to go to the E.R from that use a clamp or weight. The counter sink tool we call that one a rose bud and use it to deburr in aerospace great video i enjoyed it.
I am sure he is well aware of how to use his tools. Why is it everyone becomes a safety Nazi on you tube? In all fairness he is drilling a soft gumming type of metal that will never “catch” when drilling as slow as he is. I think I am going to start a new award for safety Nazis and call it the Peoples PC a-hole of the day award.
@@kwhp1507 LOL! Spot on, and the safety nazis kinda seem like a 'variant' of the SJW's and social media "Moral Narcissists"... aka, "I have The Truth®, and I'm Entitled!" ;-p
@@kwhp1507 I see these warnings as being for dumbasses like me who watch these videos but don't have all the experience/skills etc. that he has. I appreciate them 🤷♂️
This is exactly what I was looking for ... Fantastic idea! And thanks for the very quiet video with your calm voice and no blaring music in the background! Thanks so much!
Steve, great tip many thanks for this. Am building a PC case from the ground up and was breaking my head on how to hide rivets, you just made my day ;-) Cheers
The idea to do this with your own stock is cool! Never occurred to me. Recently I was cleaning up my favorite pliers to give to my son, and suddenly noticed the beautiful rivet that holds the two halves together - virtually invisible when ground flat and polished, and taken for granted by me. That led me to bump into your nice best-practice sharing video. Thank you!
Fantastic! I also never knew this was how it could be finished. Any Gruman body truck or jet has billion of these. Little did I know this could be a DYI. Thanks for taking the time and using your skills to make this video. Reading the comments you can now call yourself the best educator on TH-cam. I'm 68 and had no clue. Thumbs up n subscribed.
Thank you so much. I wish I had seen this before the "YOU CAN WELD ALUMINUM SUPER EASY WITH THESE RODS!!!!" videos. Half of my welds (brazing?) failed. My surface where cleaned well. I think it had to do with the aluminum being to thick to maintain the heat. It was L shaped 1"X 1 and 1/4" and roughly 3/16" thick. I was attaching 3" wide straps that where thin. Even with MAP gas it wouldn't get hot enought to consistently "weld" bond together. Steves rivets seem like a better solution for mechanical bonding.
that was exactly the information i needed to repair an aluminum piece that was probably riveted in the same way.. only knowing pop rivets so far, this was the perfect how-to for me :) thanks a lot for taking the time to share this.
This why you want to pick up those old well made hand tools like reamers and all types of metal tools when you see them cheap at a yard sale. They may be invaluable later.
With all of today's exotic tech, thx much for the reminder about the value of basic rivets... such a simple yet venerable fastening method, and as old as the use of metal itself.
I think a little more metal in the head of the rivet would have held the pieces together better and kept the metal from bending. It was only able to bend because the rivet failed. A little more counter-sink would have done the job. But the rest of your work is exceptional and I learned a few tips from you to help me out in the future. Thanks.
In additional to my previous comment in the aeorospace technology the solid rivet is used instead of welding like aircraft fuselage such as Boeing etc. using basic tools nearly The difference is mini pneumatic 1.4 kg hammer ( price is $30) and bucking bar instead of hammer and vise earl years flush rivets are hand made for steam tanks with basic tools
Great Job! Thank you for making this video. Easy to listen to and to understand. Would just like a list of your equipment with simple description so that us Newbies can get find or buy what you have in your workshop to make the rivets.
I can see the same flush surface rivets setup on my old hack 5" engineer's set square. It's had a hard life abused by many but still gives an accurate 90 degrees. The newer set i recently bought (clean shiny and of small sizes) appear to have all been brased-welded with no sign of any rivets. I bet that if they were ever dropped that's the end of them for accuracy.
He is just using a drill bit larger than the one used to make the hole for remove the burr. It will make a cleaner finished product than going straight to the reamer.
hello, if I countersink the hole a little more than you do here, and then slam the rivet in, won't it be stronger, as there is much more material to the side?
i had questions lots of question regarding your subaru Ev conversion. I own a 2014 wrx myself but the way gas prices are going. EV sounds like an option.
Is that 25% a good rule of thumb? I'm working on my first rivet project and the shop head is supposed to be flush. I wasnt sure if the usual 1.5x would work
Great video, thanks! I have wondered, does anyone know of reamers with a fatter angle? All I can think of are 60 degree countersinks. Anything in between? L
One of the highest quality and most useful and informative videos on TH-cam. An excellent educational work. Thank you!
very nice presentation. No music, just quite spoken demonstration and explanations. Beautiful, Thanks Steve
I used this technique several times. So glad that I found this video. It just took a few practice rivets and I have it mastered. Most appreciated.
Never hold a piece of metal with your hand when drilling with a drill press if it gets caught it can spin the metal now you have a spining blade I've seen someone have to go to the E.R from that use a clamp or weight. The counter sink tool we call that one a rose bud and use it to deburr in aerospace great video i enjoyed it.
I am sure he is well aware of how to use his tools. Why is it everyone becomes a safety Nazi on you tube? In all fairness he is drilling a soft gumming type of metal that will never “catch” when drilling as slow as he is. I think I am going to start a new award for safety Nazis and call it the Peoples PC a-hole of the day award.
@@kwhp1507 Because he can't flex in real life so he has to flex his safety knowledge on TH-cam.
@@kwhp1507 LOL! Spot on, and the safety nazis kinda seem like a 'variant' of the SJW's and social media "Moral Narcissists"... aka, "I have The Truth®, and I'm Entitled!" ;-p
@@kwhp1507 I see these warnings as being for dumbasses like me who watch these videos but don't have all the experience/skills etc. that he has. I appreciate them 🤷♂️
@Kevin Hanes I am not so he saved me fron having to go to er
This is exactly what I was looking for ... Fantastic idea! And thanks for the very quiet video with your calm voice and no blaring music in the background! Thanks so much!
Countersink it to 100 degrees and you'll get a far stronger joint, aviation practice .
Steve, great tip many thanks for this. Am building a PC case from the ground up and was breaking my head on how to hide rivets, you just made my day ;-) Cheers
The idea to do this with your own stock is cool! Never occurred to me. Recently I was cleaning up my favorite pliers to give to my son, and suddenly noticed the beautiful rivet that holds the two halves together - virtually invisible when ground flat and polished, and taken for granted by me. That led me to bump into your nice best-practice sharing video. Thank you!
Liked the technique, and the total no-nonsense approach. No babbling or extraneous chatter, just right to the point!
Fantastic! I also never knew this was how it could be finished. Any Gruman body truck or jet has billion of these. Little did I know this could be a DYI. Thanks for taking the time and using your skills to make this video. Reading the comments you can now call yourself the best educator on TH-cam. I'm 68 and had no clue. Thumbs up n subscribed.
Dang...that was actually pretty cool. Thanks for posting.
Thank you so much. I wish I had seen this before the "YOU CAN WELD ALUMINUM SUPER EASY WITH THESE RODS!!!!" videos. Half of my welds (brazing?) failed. My surface where cleaned well. I think it had to do with the aluminum being to thick to maintain the heat. It was L shaped 1"X 1 and 1/4" and roughly 3/16" thick. I was attaching 3" wide straps that where thin. Even with MAP gas it wouldn't get hot enought to consistently "weld" bond together. Steves rivets seem like a better solution for mechanical bonding.
Should use the ball side of the hammer to pound rivets.. causes the metal to spread out more in your countersunk hole.
I like that you expanded both sides at once.
that was exactly the information i needed to repair an aluminum piece that was probably riveted in the same way.. only knowing pop rivets so far, this was the perfect how-to for me :) thanks a lot for taking the time to share this.
Incredible Skill .... The 2 Rivets are Almost Invisible and made Strongly joined as well ! Wonderful & THANKS !
This why you want to pick up those old well made hand tools like reamers and all types of metal tools when you see them cheap at a yard sale. They may be invaluable later.
Really nice, great explanation including pounding it apart.
This is a wonderful technique, beautifully demonstrated.
Thank you.
With all of today's exotic tech, thx much for the reminder about the value of basic rivets... such a simple yet venerable fastening method, and as old as the use of metal itself.
This is an awesome instructional video, just what I was looking for. I'm definitely going to be stealing this is for my next project
Beautiful finished product, very cool. Thanks!
I think a little more metal in the head of the rivet would have held the pieces together better and kept the metal from bending. It was only able to bend because the rivet failed. A little more counter-sink would have done the job. But the rest of your work is exceptional and I learned a few tips from you to help me out in the future. Thanks.
A steeper angle with a regular countersink bit would have left more supporting material.
You can’t countersink to the point of a knife edge because it will cause rivet shearing
in the 70's i learned to use the ball end of the hammer , but then again it was mostly on steel , not as soft as alloy . good vid , thanks
In additional to my previous comment
in the aeorospace technology
the solid rivet is used instead of welding like aircraft fuselage such as Boeing etc.
using basic tools nearly
The difference is mini pneumatic 1.4 kg hammer ( price is $30) and bucking bar instead of hammer and vise
earl years flush rivets are hand made for steam tanks with basic tools
Very well explained; Thank you very much Steve; Much appreciated.
Beautiful! I hadn't seen this before! Thanks Steve!
That's brilliant, mate. First I've seen this technique. So simple and economic.
Great Job! Thank you for making this video. Easy to listen to and to understand. Would just like a list of your equipment with simple description so that us Newbies can get find or buy what you have in your workshop to make the rivets.
Very cool technique and super satisfying to watch.
It is very apparent that you have done this many times. Thank you.
I can see the same flush surface rivets setup on my old hack 5" engineer's set square. It's had a hard life abused by many but still gives an accurate 90 degrees. The newer set i recently bought (clean shiny and of small sizes) appear to have all been brased-welded with no sign of any rivets. I bet that if they were ever dropped that's the end of them for accuracy.
Very good presentation, Steve, thank you
EXCELLENT TUTORIAL SIR! THANK YOU FOR POSTING THIS!
Excellent demo, I picked up a couple of tricks, thank you for sharing your knowledge.
its not what I was looking for but what a nice finish job. I was impressed when the rivet nearly disappeared into the metal.
Thanks! That's a great idea. Very clean look. I need to work on my hammer skills to pull that off. Wow!
Thanks Steve. Very helpful and informative!
Appreciate the attention to every detail. Thanks.
You can make amazing tools using brass bars and copper rivets using this technique. I still have mine from carpentry school.
....thank YOU very much !! very precise work !!! kinde refards from Switzerland !!
Very cool technique! Looks great once it's filed. Thanks for sharing I'll be using this for sure.
Love that demo,and I don't even do metalwork!😊👏👏👏👏
thanks man i was trying to make a barrel and was wondering how to join the metal ring together
You can only see the rivets because they are a different alloy of aluminum. Great video.
Thank you. Used my first rivet today.
That’s very impressive and could be equally useful.
When filing aluminium you get a better finish if you put chalk on the file.
Great tip, thanks!
Fantastic result, well done!
Very good instructional video, thanks for passing on your skills.
That was the coolest thing I've seen in metal work on you tube
Good evening, I really liked your video, I have a question, is the material you use for the rivets is aluminum? Thank you very much.
Yes, I used aluminum rod to join aluminum parts
Excellent tutorial.
How cool was that! Wizard!!!
excellent demonstration, cool technique
That's amazing Steve. Thanks a lot!!
Excelente!!! una lección más aprendida, muchas gracias!
1:43
What am I looking at? It looks like a drill bit. Is that a brush of some kind? What is that tool you’re cleaning the hole with?
He is just using a drill bit larger than the one used to make the hole for remove the burr. It will make a cleaner finished product than going straight to the reamer.
hello, if I countersink the hole a little more than you do here, and then slam the rivet in, won't it be stronger, as there is much more material to the side?
Yes
GREAT VIDEO, HAVE YOU TRIED THIS WITH MILD STEEL?
That’s incredible advice...THANK you
I wonder what green liquid is before drilling, I like this method.
Great video. Thanks for the tips!
Wow that is awesome. Thanks for sharing
This is great Thank You! 0:39 Any particular type and size of rod? Are these generally available at home depot?
Great Video, Great information, Thank you for posting
Amazing! A question: Do all of the parts need to be aluminum, or can steel be joined like this with aluminum rod?
Yes, you can join steel with Aluminium, but the rivet will be more visible, make sure it's strong enough though
Are you using stainless or aluminum rod for the rivets?
Aluminum
Thanks I'll be using this Technic on my next project.
I learn something today for sure..Thanks.
Excellent idea! Thank you for sharing. I'm sharing it too.
i had questions lots of question regarding your subaru Ev conversion. I own a 2014 wrx myself but the way gas prices are going. EV sounds like an option.
Is that 25% a good rule of thumb? I'm working on my first rivet project and the shop head is supposed to be flush. I wasnt sure if the usual 1.5x would work
Better too long than too short. You can always file it away afterward.
Exactly what I needed. Thanks, Steve.
Nice photography!
Well done....Professional job. Thanks
Excellent job!
Nicely done , what type of file did you use. Thanks
All that beautiful work, then destroy it at the end. Lol. Great vid!
what is that tool that you use at 7;35? My dad has one of those and I wasn't sure what it was for.
Tapered reamer
you should predrill deburr the holes first then hit your rivets, you have metal shavings in between your layers.
thanks for the video , excellent work .
Great video, thanks! I have wondered, does anyone know of reamers with a fatter angle? All I can think of are 60 degree countersinks. Anything in between? L
Superb work ^_^ very educational. Thank you very much!
What kind of rod did you use to make the rivets?
I got it at a hobby store. But you could also use welding rod from the hardware store.
@@stevecornett8043 Great, sounds easy enough, thank you for the quick reply.
Bonjour. Très bonne vidéo. Merci.
This is good but what about using hand gloves to protect our fingers
Magical! Great demo.
This is great! thank you.
What were those other tools you were using
Maybe you mean the automatic center punch or the calipers
Thank you for this nice trick :)
That was amazing. Thank you.
Wow! That was impressive
That is SOOO cool!
Great job man
This is perfect thank you
nicely done.
At 1.24 what tool is he using?
Spring loaded center punch
@@stevecornett8043 hi, what is the tool at 3.09?
Vernier caliper
Wow thanks for this video, awesome trick 👍
Excellent!