Used to remember trucking with theses on the old trailers, we had to tighten the nuts every time we hooked onto them, nuts got loose and the rim would spin on the hub rip off the valve stem. Some drivers over tightened them, stretched the studs and could screw up the spacer ring. Glad they are pretty much gone now
I was a kid the first time i changed a dayton rim. Took the nut all the way off. The wedge let go like a rifle shot. The shop still has the hole in the wall where the wedge hit.
I was always told when messing with split rims/two piece, remove the valve stem or empty all the air. I NEVER messed with pressurized tyres and always used an inflation cage for exactly that reason. My cousin lost a leg airing up a split rim tyre. My grandpa could tell horrible stories about the same subject too.
THANK YOU SO MUCH!! I have a shool bus that I converted into a camper and have to replace the brake cylinders. Heard so many horror stories about the wheels. Now I know what to do. I am painting my Dab green and black
I would just replace the whole damn wheel hub and axle if I had to just to have normal rims and not have to worry about my life everytime I do brakes or tire work 😂
Too many wheel offs on dayton assemblies,, and subpar systems,, a hard brake application w loose daytons can shear off both valve stems, and thats its own problems,,
The wheels that are used today are mostly hub piloted wheels, not Budd Wheels. Budds have essentially two lug nuts per stud. One (with the 13/16" square head also known as a thimble) holds the inner wheel on. The second nut holds the outer wheel on. Also, right side, right hand thread. Left side left hand thread.
No that’s how you get the outer wheel off. How bout the inner now? Yes I’m new at this don’t come at me. The trailer I bought was manufactured when I was 2 years old.
Used to remember trucking with theses on the old trailers, we had to tighten the nuts every time we hooked onto them, nuts got loose and the rim would spin on the hub rip off the valve stem. Some drivers over tightened them, stretched the studs and could screw up the spacer ring. Glad they are pretty much gone now
For sure not the nicest thing to work with.
I was a kid the first time i changed a dayton rim.
Took the nut all the way off. The wedge let go like a rifle shot.
The shop still has the hole in the wall where the wedge hit.
That's crazy definitely have to be careful.
I was always told when messing with split rims/two piece, remove the valve stem or empty all the air.
I NEVER messed with pressurized tyres and always used an inflation cage for exactly that reason. My cousin lost a leg airing up a split rim tyre.
My grandpa could tell horrible stories about the same subject too.
Draining the air will do nothing in this case😂
THANK YOU SO MUCH!! I have a shool bus that I converted into a camper and have to replace the brake cylinders. Heard so many horror stories about the wheels. Now I know what to do. I am painting my Dab green and black
Your welcome thanks for watching good luck with your project.
It's much easier to loosen the nuts then swat the rim with a sledgehammer. One or two swings and your done . Plus your not in line with the wedges.
People give Dayton rims a bad name. If you’re safe and know what you’re doing then there’s nothing to worry about.
You are 100% correct
Budd Wheels are way better tho.
Hello from the Netherlands.
thanks for the video.
Sincerely Hollandduck
Thanks for the comment.
@@dirtworxsolutions 👍
Its to release the stored kinetic energy,, and so you dont lose a knee cap,,
I would just replace the whole damn wheel hub and axle if I had to just to have normal rims and not have to worry about my life everytime I do brakes or tire work 😂
taking them off is fairly easy, its putting them back on that can be a pain
Thank you
Thanks man
Hola. Se puede convertir a sistema Dayton desde un sistema convencional?
It probably could be. You would have to get an old dayton setup and put it on.
What size socket are you using? what is the thread of the nut
1-1/8🤨
1 1/8 socket
Thanks
Any reason why Dayton wheels are no longer used?
All I see today are Bud wheels on trucks & trailers.
The new style is alot more user friendly.
Too many wheel offs on dayton assemblies,, and subpar systems,, a hard brake application w loose daytons can shear off both valve stems, and thats its own problems,,
The wheels that are used today are mostly hub piloted wheels, not Budd Wheels. Budds have essentially two lug nuts per stud. One (with the 13/16" square head also known as a thimble) holds the inner wheel on. The second nut holds the outer wheel on. Also, right side, right hand thread. Left side left hand thread.
Yeah what if there on the inside of the trailer facing each other and have never been off
Doesn't sound like fun
@@dirtworxsolutions ill send you a pic somehow lol
@@dirtworxsolutions whats you ig
No that’s how you get the outer wheel off. How bout the inner now? Yes I’m new at this don’t come at me. The trailer I bought was manufactured when I was 2 years old.
Big hammer, good aim and patience