I agree with the choice of processor, but I think it would be more logical to go with the latest SX1262. There could easily be a chance to work in Lora or Lorawan. It didn't make much sense to choose the lora chip, which is almost from the esp8266 days.
In fact, in the new series, workability should be preserved, especially with the programming infrastructures Arduino IDE, ESP IDF and Microphyton. Also, all pins must remain in a workable condition. . There may also be an Esp32s3fn8 in the leading role. But they should all be in chip form, not modules. Esp32s3fn8 and sx1262.
![⭐️( ลอยกระทง 2024 ) Ver. แดนซ์ Remix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/rMWOLhgXUHc/mqdefault.jpg)
Check out the Github repo for the complete project here : github.com/pcbcupid/Lora-Wireless-Sensor-Network
I agree with the choice of processor, but I think it would be more logical to go with the latest SX1262. There could easily be a chance to work in Lora or Lorawan. It didn't make much sense to choose the lora chip, which is almost from the esp8266 days.
Thanks for your valuable input! Maybe to fix this, we can make another series where we use the SX1262 IC instead of a pre-fabricated module.
@@pcbcupid I think it would be great too. Good luck.
In fact, in the new series, workability should be preserved, especially with the programming infrastructures Arduino IDE, ESP IDF and Microphyton. Also, all pins must remain in a workable condition. . There may also be an Esp32s3fn8 in the leading role. But they should all be in chip form, not modules. Esp32s3fn8 and sx1262.
@@ressamendyThanks for great suggestion!
@@ressamendy Thank you!
Will you be uploading any tutorial for integrating 4g modules on a pcb along with esp32
If not could you provide any good resource for that?
How to upload program at that modul without usb ?
There are programming pin, you need to use FDTI module to program the esp32c3. Please check the schematic.
@@pcbcupid thanks bro
When the kicak+blender tut?