Hey bro I am big confusion in Pixhawk and dji naza ...which one you will recommend ..as you are an experienced person. So plz I am making my drone for aerial photography as well as for fun. So plz tell
If you want commercial use go for dji naza As pixhawk available in market are cheap clones , it is open source so no testing gurantee If you want drone project , go for pixhawk too many great features
Thanks bro, configuring Ardupilot is a bit confusing, so plz in Ur next video explain in detail, Moreover, also elaborate the process of setting different flight modes (like RTL, Loiter etc). Once again thank you for making awesome videos till today.
bahoot badhiya sir but ye quick video he iska part banaiye depth video banaiye .usme same 9x remote ka setup 3 mode switch setting everything explain kariye and fir mission planner programing bataiye video mast banegi aap aacha samjhate ho👍
Hi.... what is the cost of these all electronics including battery, I am planning to buy it, but in seller site the package is not included with battery.... please reply, thank you.
Brother,I am a 7th class student Do you buy as a kit or separate My friend and l build this quadcopter and programme d as you did. Thank you for this kind information. Can you upload a video of how to make RC remote
my drone is running automatically after arming., and one more problem is that in my kk2.1.5 flight controller in receiver test setting all values are not set to zero by the transmitter trims tell me what i do for fixing these problems
Just two questions: 1: Is there an alternative to the provided Allen screws? 2: What economic and effective fpv setup should one use with such a drone for sport flying/racing?? (I'm using a cheaper one, with a single transmitting and receiving antenna and a cheap micro cam...my range with the cam is about 600mtrs , transmitter range is quite high)
Hi . I noticed that you powered the Apm flight controller with a power module and Also the ESC as well is it necessary to power it with both the source (power module and ESC) . I've seen some other videos where people have disconnected the positive wire from the esc as it's not required if power module is used. Can you clear this doubt for me I am confused as I'm building my first drone with Apm.
great . i make drone with k.k. 2.1 board but my drone's motor rpm suddenly increase it goes upward right direction and does not in stable position. so what i should do ?
This the best Drone Designing video I have watched. And I would like to ask you about are we can use flysky fsi6 6ch rc transmitter and receiver for the drone. Please reply me.
bro APM you have mounted is not exactly in center but towards little left as it can be clearly seen in video. Samething I did to mount GPS, I mounted APM little left & my drone would flip off. After mounting APM in the center my drone flies. How could you mount it to left than center?
dear sir I am making a drone with 4 motors with KK 2.15 flight controller and three motors are running at good speed but one motor that is starting motor is running at more than speed how can I control the speed of first motor please help me sir
APM 2.8:- www.flyrobo.in/ardupilot_apm_2.8_flight_control_board_drone/?tracking=5c723900abvrl
KK 2.1.5:- www.flyrobo.in/kk2.1.5_lcd_flight_controll_board_for_fpv/?tracking=5c723900abvrl
GPS:- www.flyrobo.in/gps_module_ublox_neo-6m_with_electronic_compass/?tracking=5c723900abvrl
Flysky Tx and Rx:- www.flyrobo.in/flysky_fs-i6_2.4g_6ch_afhds_rc_transmitter/?tracking=5c723900abvrl
Would you prefer ArduPilot over Kk2.15 if yes, why?
@@geekyfreak7920 yes because we cannot connect gps and telemetry to kk2.15
Does this site send the products to Brazil?
Yes
My aap see milna chahta hu drone ke liye samstipur
You and your projects are the accurate and the best one
YE BACHHA BAHUT AGE BADHEGA, GOD WILL SURE BLESS YOU🙌🙏
Can this plane carry 1kg to 2kg ?
All videos are nice in your channel i am your follower
Hey bro I am big confusion in
Pixhawk and dji naza ...which one you will recommend ..as you are an experienced person.
So plz I am making my drone for aerial photography as well as for fun.
So plz tell
I will recommend Pixhawk with GPS
@@ViralScience thank you
If you want commercial use go for dji naza
As pixhawk available in market are cheap clones , it is open source so no testing gurantee
If you want drone project , go for pixhawk too many great features
@@ashishx200000 I made it ....but I am having some issues with my pixhawk....Will you help me...???plzplz
@@vedantsatpute5167 i am expert in making any type of drone , any flight controller
bro when will you be adding 2nd part of this video i am keenly waiting for it
Thanks bro, configuring Ardupilot is a bit confusing, so plz in Ur next video explain in detail,
Moreover, also elaborate the process of setting different flight modes (like RTL, Loiter etc).
Once again thank you for making awesome videos till today.
Would you recommend ArduPilot over KK2.15 if yes, why!?
Ur English is very impressive
bahoot badhiya sir
but ye quick video he iska part banaiye depth video banaiye .usme same 9x remote ka setup 3 mode switch setting everything explain kariye and fir mission planner programing bataiye video mast banegi aap aacha samjhate ho👍
Bhai is emax motor long time flight karna ma heat hota hai keya?
Hi.... what is the cost of these all electronics including battery, I am planning to buy it, but in seller site the package is not included with battery.... please reply, thank you.
Sir, aapne is video me kis company ka motor use kiya hai,
Please help me.
You don't need to program anything on your pc? Like drivers for gps things like that?
Brother,I am a 7th class student
Do you buy as a kit or separate
My friend and l build this quadcopter and programme d as you did.
Thank you for this kind information.
Can you upload a video of how to make RC remote
my drone is running automatically after arming., and one more problem is that in my kk2.1.5 flight controller in
receiver test setting all values are not set to zero by the transmitter trims tell me what i do for fixing these problems
West coast gangster beat starts @ 12:36.
Great... one more quadcopter build. It's awesome
2200kv motor is best for this drone?
Just want to know flyrobo is safe To order . Can we do cash on delivery.
Yes its safe
bro which moter are used share link is when i open other are......
Where is APM software setup video?
Painless360 has the best programming videos.
Bro when did you use the kk2.1.5 given in the description???
Bro i am going to do this project, i want u r guidance bro
Are you made this drone
I am also bro but no spar parts pls send me the parts totally how much cost finally made-up this drone
@@keerthanmp s bro i finished it
@@techVtricks it's flyrobo.com bro
Ok but my drone is fall on left or right side
In apm arducopter and ardupilot is same or different.It has same firmware or not.
Without power module ye work krega kya esc k sath
the gps is autonomous or wants a card sim
Just two questions:
1: Is there an alternative to the provided Allen screws?
2: What economic and effective fpv setup should one use with such a drone for sport flying/racing?? (I'm using a cheaper one, with a single transmitting and receiving antenna and a cheap micro cam...my range with the cam is about 600mtrs , transmitter range is quite high)
Just subscribed; huge thanks, you just helped me with a school build!
Can we install go Pro camera on tat drone.. with WiFi connection...if possible please make a video.
Can I make this one with the F250 ?
Please tell total cost in making it
f450 quadcopter with apm 2.8 mein follow me setup kis trah hoga
Every parts price bta sakte ho kya total kitna lga
Can we use 14.8 volt and 5200mah battery
did it work? please reply
Sir, drone me, (cw) motor lagati hai
Ya
(Ccw)
Please help।me
Hi . I noticed that you powered the Apm flight controller with a power module and Also the ESC as well is it necessary to power it with both the source (power module and ESC) . I've seen some other videos where people have disconnected the positive wire from the esc as it's not required if power module is used. Can you clear this doubt for me I am confused as I'm building my first drone with Apm.
Is this drone able to photography??
Hello bhai ya ap blue colour board kya ha bro please reply
Sir, is video me jo frame hai bo,
X frame hai, ya
+ frame hai,
Please reply me
Tere drone ka circuit boarb toh👍👌👍👌hai😃😉
which motor did you use ,how much kv is it?
What is your flight time with the 4200mAh battery?
How much it's fly for 2200 mah
Do you need dgca approval for flying this
bhai aap ne jo battry use ki h vo kha se buy ki vhi chahiye
Sir, is frame ko kasne ke liye kaun se number ki ln key use ki jati hai
What motor are you using?
Can i use radiolink at-9s transmiter
What is the weight of this drone after setting all the oarts
Did you register it in DGCA website to get UIN?
Bro... Does it have return to launch function feature... Please say... 🙏
Bro can we made esp 32 or stm32 flight controler (professional) .can u try ?
great . i make drone with k.k. 2.1 board but my drone's motor rpm suddenly increase it goes upward right direction and does not in stable position. so what i should do ?
Awesome built bro. love it from Nepal.
Learned a lot from video;
It would be great if you explain the stuff while connecting it;
Pls i really need answers , can a video transmitter alongside a camera be connected to audipilot apm 2.8
Bro can we use cheap flysky controller and receiver for gps drone
Does the flysky th9x tx support telemetry ?
Bhai sponsor ne ye sab aap ko free mei diya hai kya? Please batao
What is the difference between 1000 kv bldc motor and 1400kv bldc motor
Ater Price kmn hbe vai 20 mp Camera saho plz janaben..r sob kichu ki stok a ache?
This the best Drone Designing video I have watched.
And I would like to ask you about are we can use flysky fsi6 6ch rc transmitter and receiver for the drone. Please reply me.
Yes
You make any drone
Very nice bro
Use a small amount of thread locker blue on those motor screws!
Indha parparts engga kadakkum bro
Everything you used without soldering iron does all come in one kit
Hey bro please tell me what is its range because I also wanted to make it
Can altitude hold work without gps
Hi, can you make a video on providing simple and super simple mode to drone.
Thanks. Very useful
Can apm2.8 flight controller run from flysky ct6b remote controller
Moter Kitne rpm ka use Kia h..??
How much cost making overall drone???
Is the parts from India online or not?
BHAI YE GREEN BOARD KAHA MILTA HAIN ...STATONRY KE SHOP ME MILTA HAIN KYA
how should i add camera and gimbal to apm2.8? can you help me out?
You can use f330 frame from stable flight
Where I buy the Allen screws for motor fixing
it comes in package
Bro..Can you tell us non chinese products regarding drone....??
Brother iski flying range kitni hai or Total kitne price me completely ready hoga.
How much weight can it lift
can we use fly sky ct6b
Bro where did you. Buy that battery
bro APM you have mounted is not exactly in center but towards little left as it can be clearly seen in video.
Samething I did to mount GPS, I mounted APM little left & my drone would flip off.
After mounting APM in the center my drone flies.
How could you mount it to left than center?
Can I use 40A esc
They don't ship outside India?
Hey bro nice video by the way is the power module and the GPS module neccessary in building drone with apm 2.8? Please reply thank you
What's the total cost approx
Good work and nice project bro
bhai kansa online site me drone parts order kartha ho
Nice
Full price koto...vai..?plz bolen...
what should be its range
Bhai isme kaun si company ki motor hai
Please send me the complete parts description...
dear sir
I am making a drone with 4 motors with KK 2.15 flight controller and three motors are running at good speed but one motor that is starting motor is running at more than speed how can I control the speed of first motor please help me sir
APM flight controller provided in the link is original or clone ?