Lee Wilkinson I’m doing a design for bash plates that will fit the 125 and 250 and will have it lazer cut - as soon as I’ve had the first one made I’ll put it up here and on the KURZ FB page with a price as quite a few people have asked me
Cheers mate when u manage to get bash guard sorted I'll 100% have one off u as it's hard to get bash guards for our bikes the frames are a bit different underneath cheers for the info
Hi Darren, welcome to the club! A tyre mousse is a big rubber ring that you insert into the tyre to replace the tube. You can get soft medium and hard depending on how you like it! They aren’t Road legal but everyone uses them as it’s painful when you get a puncture. Lots of manufacturers but I use Michelin for mine and put a fake tube valve in so it looks like you have a tube of the rozzers stop you
@@Mikereevesrocks Thank you mate appreciate the reply 😁 Ive read you cant use them on the road as they degrade? It will be ok riding slowly on tarmac just to get to my local woods? You still have your Bike? 😁
@@darrenlewis1409 yes they degrade but not be done over 2000 miles on mine no problem- my rides are usually 100 miles long with a 70/30 split between road and green lanes - yip still got her!
I only use it for green laning and have done 3000 miles now. There is quite a lot of tar between lanes so my guess is 60% tar - my tyres are more off road focussed so can be a bit u comfortable in long tar stretches but don’t do much over 50mph anyway
Hi Martin, you must be excited! Yes they have a steel thimble type oil filter - I just take it out, clean it, grease the rubber and put it back! It’s in the sump bolt housing. Yip 10W40 oil - I use DX4 semi-synthetic💪
@@Mikereevesrocks Just built it up.. Started perfect.. Sounds amazin. Looks so cool that not sure I wanna wreck it in the lanes,,, may supermoto style it...
@@marmac567 classic! I’ve got the 2019 so jealous of you boyz cos it looks cool in black! I’ve bought the 2020 plastics and decals so am just waiting for the opportunity to convert it all over - May even do a little vid for it
@@Mikereevesrocks Have you done the lanes lately?? not seen a vid for awile.. btw,, I just notice,,, reading the manual,, it said,, adjust the tappets straight away as they are not set from factory... Did you bother with that??
What gear shifter is on the bike as I have the same kind off bike and been looking to upgrade the bike thanks
Lee Wilkinson hi, I bought an aftermarket one from DB racing
Thanks mate. I'm looking to get a bash guard on as well but need a custom one as my bike is similar to yours were do u get custom bash guards from
Lee Wilkinson I’m doing a design for bash plates that will fit the 125 and 250 and will have it lazer cut - as soon as I’ve had the first one made I’ll put it up here and on the KURZ FB page with a price as quite a few people have asked me
Cheers mate when u manage to get bash guard sorted I'll 100% have one off u as it's hard to get bash guards for our bikes the frames are a bit different underneath cheers for the info
Hi mate. Just bought one 😁 Can you tell me what the "tyre mousse' is? What does it do and what product please?
Hi Darren, welcome to the club! A tyre mousse is a big rubber ring that you insert into the tyre to replace the tube. You can get soft medium and hard depending on how you like it! They aren’t Road legal but everyone uses them as it’s painful when you get a puncture. Lots of manufacturers but I use Michelin for mine and put a fake tube valve in so it looks like you have a tube of the rozzers stop you
@@Mikereevesrocks Thank you mate appreciate the reply 😁 Ive read you cant use them on the road as they degrade? It will be ok riding slowly on tarmac just to get to my local woods? You still have your Bike? 😁
@@darrenlewis1409 yes they degrade but not be done over 2000 miles on mine no problem- my rides are usually 100 miles long with a 70/30 split between road and green lanes - yip still got her!
This is 21 bhp I think 70 plate is now 23 bhp correct
Yeah I believe so
If I was to change rear sproket for bigger on and smaller front sproket do you know how much top.speed lose is it like 10mph or just like 2 or 3 mph 🤔
@@liam6488 by increasing rear and reducing front - you will reduce the top speed not increase!
Do you use it on the road much? how many miles are on it now?
Nope not much at all but saying that, when green laning, more than 50% on tar between the lanes anyway. Done 2500 mls
I only use it for green laning and have done 3000 miles now. There is quite a lot of tar between lanes so my guess is 60% tar - my tyres are more off road focussed so can be a bit u comfortable in long tar stretches but don’t do much over 50mph anyway
What is green landing and where are these places could you name a couple of good ones I live chesire stafford area
Hi,, my bike comes tomorrow,,,,, do they have an oil filter to change?? and is it 10/40 oil? Thanks
Hi Martin, you must be excited! Yes they have a steel thimble type oil filter - I just take it out, clean it, grease the rubber and put it back! It’s in the sump bolt housing. Yip 10W40 oil - I use DX4 semi-synthetic💪
@@Mikereevesrocks ye,, I been waiting a couple months for it.. Will have to wait for the road reg also before I can av a blast..
@@Mikereevesrocks Just built it up.. Started perfect.. Sounds amazin. Looks so cool that not sure I wanna wreck it in the lanes,,, may supermoto style it...
@@marmac567 classic! I’ve got the 2019 so jealous of you boyz cos it looks cool in black! I’ve bought the 2020 plastics and decals so am just waiting for the opportunity to convert it all over - May even do a little vid for it
@@Mikereevesrocks Have you done the lanes lately?? not seen a vid for awile.. btw,, I just notice,,, reading the manual,, it said,, adjust the tappets straight away as they are not set from factory... Did you bother with that??