I don't understand why anyone would give your video a thumbs down. You cover every aspect of the tool and keep it entertaining. I think you've got trolls or it's a competitor. Makes no sense man. Thanks for putting in the time and for being thorough.
You’re very welcome! And thank you for the kind words. I try to educate and entertain, so perhaps some folks don’t get my sense of humor. Cheers and Happy holidays!
Billy, I’ve many chain saws since 1991, approximately 30 saws different makes. A thorough video would be one that takes you through all the maintenance needs especially for us who live in small towns far away from big cities. My largest saws are STIHL O66 Magnum, Echo CS8000 and STIHL Ms460.
I have a Husqvarna 455 for tree cutting, but for around the yard or on my trails I was always using a hand saw for one or two annoying low limbs. Just bought one of these to make my life easier.
I have this saw, works well but leaks bar oil when stored in the upright position. I've discovered if you store the saw on the bar side with the oil fill cap up it doesn't leak. Adding an O-ring to the cap does not help, the leak is on the inside of the fill spout to case seal. Some people take it apart and add sealer to the gasket, I don't feel I should have to disassemble a brand new saw so for now anyway I'll just store it on it's side. Thanks for the video
I just acquired this saw with 5Ah battery. I have two corded electric chainsaws, a 16" and a 10" pole saw. I had a few gas powered units before, but with infrequent use, they were a pita sometimes. Looking forward to giving this a try. BTW, great vid post.
Thank you for this video my guy for the life of me I couldn't figure out why my brand new saw wasn't working, it was because I didn't know about the kick back guard needing to be pushed back.
Glad it worked out! Reminds me of the time I returned a DeWalt combo kit… the batteries wouldn’t charge… I got another kit and it turned out I wasn’t pushing them in hard enough. 😁
Hi , Thank you for helping me with your tutorial video , I have a little question about what kind of Oil do I have to use , May you please let me know about ? l will appreciate your help , Thank you again
Good video. I have had this model for a couple years now. Very interesting 14' bar mod that could be done. A little google fo will show the part numbers and such.
I just bought this. Having operated chainsaws for several years, there are a couple things that bugged me. The bar oil cap was SO hard to twist that I almost broke it. The saw is so light that it is quite jumpy. Overall, I think it is a good tool for light duty trimming around the around the house but not for serious cutting.
I thought of the bar oil cap was very hard until I saw it has to counterclockwise it was quite hard to push to open it ...instructions are tiny and very hard to read
I've cut at least 4 8 to 10inch trees around my house 1 was dead 1 was leaning towards my building the other was a pine tree I would say it was a good 12 to 14 inches it cut all them down with 0 problems. But I'm about to get the bigger 20inch Dcs677 saw soon that thing is a beast!
Great video, I am having trouble starting it. It is the same model and I am using 5Ah battery. I did pulled back the break, as well as pressed the safety switch but still no response. Appreciate your inputs
Hold the side safety button while holding the trigger. When my saw's battery gets low it will stop in the cutting process so I change batteries. I'm thinking of getting a 60V Flex battery
Not trying to be a jerk, but that test at 4:00… either that chain is super dull or it’s on backwards. I have the same saw and with a sharp chain it’ll pull pretty hard. Plenty of torque. Also, the 14” bar mod makes it a different machine. Look at the Woodland Pro ArborMax Lite combo from Bailey’s Online. It’s like $34 and awesome.
Yes, strangely I was using the saw last week to cut off the bottom of Christmas trees and it was zipping through like butter. The wood I used in the video had been seasoning for a year.
Feel bad for the folks that had a crap experience with this saw. I beat the sh*t out of mine and I’ve had no issues with it. Well, aside from replacing the chain 4 times. Yeah, I definitely work the hell out of it regularly and it’s a little beast. 👍🏻😎👍🏻
I have the exact same saw. I just had to return it to Home Depot after about a month of ownership because it quit. Would not run for more than a second or two even with a fresh battery. The new one works well, after an hour of cutting. I hope it stays that way!
I purchased this in November at my local Home Depot for $99. I couldn’t believe the price which is why I didn’t hesitate. It will likely go on sale again so keep an eye out. Happy holidays!
Fill gage is not to fill the oil, you should always fill to the top. The gauge is just so you can see where u are at during operation which will be upright and not on its side.
I'm torn between this model and the 14" Ego, which definitely cuts faster based on what I've seen, but it only comes with a tiny 2.5 amp battery. I already have a couple 5 amp Dewalt batteries, so I can save some money there, but I think the Ego saw is a bit better.
Hello excellent video, but I have a question. I have 12 DEWALT tools that I bought with DCB606 batteries, now I want to buy this chainsaw to cut small trees in my yard, but according to home depot they say that I cannot use the batteries that I have because it will burn the motor, as it suggests that these are Models DCB205, DCB205G, DCB205CK or DCB205-2 What do you recommend in this regard, it is true that it would burn the motor or if I can use my batteries. Thank you
Great question! I’m going to call DeWalt’s 800 number and get back to you on this. The manual doesn’t specify which batteries can be used and this tool is considered part of the 20V Max system, which boasts being able to use any 20V max battery (even though it’s more like 18V). Just thinking aloud, Ah is not a measure of power, but a measure of charge/run time, but how batteries are wired (series vs. parallel) impacts power. If I recall correctly, both 5.0 and 6.0Ah batteries are two or three rows of cells wired in parallel so there would be no change in voltage, just more Ah/runtime. If you were going from a 2.0Ah battery, which is wired in series (in which case you’d add up the voltage of each cell in the pack), to a 5.0Ah wired in parallel (in which voltage doesn’t get added up), you’d see an increase in power because there are more cells doing less work. Anyway, I’ll get back to you once I hear from DeWalt.
@@BruceAlanR thanks for your help but I do a mistake the battery that I have the models are DCB606, if you have some news please let me know, thanks again
DCB606 is a 6.0Ah flexvolt which has more cells in it than say a DCB206. Either way, I confirmed with a nice woman at DeWalt (“Ana”) that there is no restriction on batteries for this saw and the DCB606 flexvolt is OK to use. That makes sense to me but I’m not a tool manufacturer. 😀 Thinking aloud again, Flexvolt switches from parallel to series to change voltage (you add voltage of cells in series and do not add voltage when cells are in parallel- that’s how it switches between 20V and 60V). Anyway, the 20 volts wouldn’t be the concern. The flexvolt has more cells inside (I believe there are fifteen 18650 cells). For comparison a DCB206 6.0Ah XR battery has ten 21700 cells. That would mean the cells in the flexvolt aren’t working as hard and would provide a little more power. Is that bad for the tool? The verdict is still out. I’ve heard of tools burning out when using a flexvolt battery; however, was it due to using a flexvolt battery? DeWalt hasn’t admitted to anything if it is and stands by their products. Take comfort in the fact that the tool has a 3 year warranty so if your flexvolt batteries are the issue, you’re covered.
@@BruceAlanR Thank you very much for explaining in detail the conversation you had with Ana, then I can safely use my DCB606 batteries, without any problem or concern that the motor will burn out, you mention that the tool has a 3-year guarantee but what happens if, for example, the motor burns out and dewalt says it was from using FLEXVOLT LITHIUM ION 20V/60V batteries==(MAX) 6.0 Ah/2.0Ah, thanks again for your attention regarding my questions
I don’t think DeWalt would give you an issue, but if they did you can say you consulted the manual, which doesn’t specify which battery to use or mention any restriction on 20V max batteries that can be used… and that includes the flexvolt line. I’ve had positive experiences with DeWalt’s customer service in the past. I didn’t think the fence of my table saw was straight so I called with the part number and they sent me a new one.
I have the 8" pole saw and it seems to cut faster and better than this 12" chainsaw. Thanks for the vid I was going to purchase this but I'm going to pass.
The oil sight window is not there for when you're filling, it's there for when you're using it. With a gas powered saw, you fill the oil when you run out of gas, but with a battery powered saw, the window is there to help you remember to add oil.
@@BruceAlanRYour battery is weak. That's why you noticed a big change from 1 cut to the next. My 5 amp hour batteries will make 20 cuts like you did and will barely drain down 1 bar. Some Dewalt batteries won't last near as long as others just like them. This is a common thing with battery powered tools unfortunately. Always test the new tool with a known strong battery first.
@@jjoleboy Great advice and info! At the time of the video I was using batteries that had a fair number of charge cycles. I’ve recently been doing a lot of research on batteries and have opened a few older packs to test for unbalanced cell banks, check cell capacity, and all that fun stuff. The BMS systems in these packs are OK, but cell degradation does happen faster when the packs are used in the higher drawing tools.
Thanks for the feedback. It was a brand new chain for the video. I wonder if it would cut faster with a flexvolt battery attached. Not even sure it would fit, it I may try it.
Excellent! I mainly do reviews to share my experiences with tools I buy. I try not to recommend products as I’d feel terrible if someone got them on my account and then didn’t like it. Luckily, DeWalt has the 30 day guarantee so you can try it and return it if you don’t like it.
The chain brake has to be Back for saw to operate, Not Forward. The brake being forward means brake is engaged as when a kickback occurs and saw shuts down. I doubt if kickback will ever happen with this low power limb cutter.
Of course it isn't it's dewalts smaller saw. Dewalt released a much bigger saw called the dewalt dccs677 that thing with a 5ah battery is a beast and just as fast or faster than a mid range stihl.
Omg this is painful to watch!!! I have this saw and it will rip through a 6x6 in one tenth the time this guy is taking!! Uggghhh good thing you bought the dewalt to practice with a gas saw would eat him up!!
This saw is a real piece of Shite. I got one and it worked for about 40 minutes altogether and stopped working. The brake trigger switch was faulty and it was a nightmare to fix. From looking up how to fix it , i discovered it is a common problem with these saws. So had to send it back to DeWalt to fix and return it took months. And then it happened again same issue.
Ugh! Thank you for sharing your experience. That sucks that it takes DeWalt that long to turn around a repair. I recently had to send one of my Milwaukee tools back for service and they had it back to me within a week… although, they ultimately assessed it and sent me a brand new tool instead of repairing it.
One user said my 5 Ah batteries were old and that his chainsaw rips through logs; however, my batteries aren’t old so I can only assume I’m the problem. 🤣 In doing some research, it may be that the XR 5Ah battery isn’t the best fit for the chainsaw. May require a more powerful battery for better performance. A bigger battery doesn’t mean it provides more power, just more run time. I’m going to do some testing.
I don't understand why anyone would give your video a thumbs down. You cover every aspect of the tool and keep it entertaining. I think you've got trolls or it's a competitor. Makes no sense man. Thanks for putting in the time and for being thorough.
You’re very welcome! And thank you for the kind words. I try to educate and entertain, so perhaps some folks don’t get my sense of humor. Cheers and Happy holidays!
Billy, I’ve many chain saws since 1991, approximately 30 saws different makes. A thorough video would be one that takes you through all the maintenance needs especially for us who live in small towns far away from big cities. My largest saws are STIHL O66 Magnum, Echo CS8000 and STIHL Ms460.
Milwaukee fans coming in hot
LOL
Maybe time annoying sound effects 😕
I have a Husqvarna 455 for tree cutting, but for around the yard or on my trails I was always using a hand saw for one or two annoying low limbs. Just bought one of these to make my life easier.
It’s good for around the yard. I just took a few large limbs down the other day. More firewood!
I have this saw, works well but leaks bar oil when stored in the upright position. I've discovered if you store the saw on the bar side with the oil fill cap up it doesn't leak. Adding an O-ring to the cap does not help, the leak is on the inside of the fill spout to case seal. Some people take it apart and add sealer to the gasket, I don't feel I should have to disassemble a brand new saw so for now anyway I'll just store it on it's side. Thanks for the video
I agree about the oil leaking when stored. I try to get as much out as possible before I put the saw away.
Same here. I store mine on its side. The leak has actually become less after a lot of use. 😎
I just acquired this saw with 5Ah battery. I have two corded electric chainsaws, a 16" and a 10" pole saw. I had a few gas powered units before, but with infrequent use, they were a pita sometimes. Looking forward to giving this a try. BTW, great vid post.
😃👍
Thank you for this video my guy for the life of me I couldn't figure out why my brand new saw wasn't working, it was because I didn't know about the kick back guard needing to be pushed back.
Ah yes! Glad the video was helpful.
@@BruceAlanR 😂😂😂😂😂
Hahaha ! Me too this is why I came here .
Glad it worked out! Reminds me of the time I returned a DeWalt combo kit… the batteries wouldn’t charge… I got another kit and it turned out I wasn’t pushing them in hard enough. 😁
it’s called a chain brake…people like you shouldn’t own a chainsaw. Have fun at the ER!
Hi , Thank you for helping me with your tutorial video , I have a little question about what kind of Oil do I have to use , May you please let me know about ? l will appreciate your help , Thank you again
Any product marked as “Bar and Chain oil” will do.
Good video. I have had this model for a couple years now. Very interesting 14' bar mod that could be done. A little google fo will show the part numbers and such.
I’ve seen that mod and considered it; however, I wouldn’t do it until the saw is out of warranty. Any mod will void the warranty.
I just bought this. Having operated chainsaws for several years, there are a couple things that bugged me. The bar oil cap was SO hard to twist that I almost broke it. The saw is so light that it is quite jumpy. Overall, I think it is a good tool for light duty trimming around the around the house but not for serious cutting.
Thanks for sharing your thoughts. I agree it’s best for light trimming around the house.
I thought of the bar oil cap was very hard until I saw it has to counterclockwise it was quite hard to push to open it ...instructions are tiny and very hard to read
I do the old trick of putting a little oil on the gasket to keep it lubricated.
I've cut at least 4 8 to 10inch trees around my house 1 was dead 1 was leaning towards my building the other was a pine tree I would say it was a good 12 to 14 inches it cut all them down with 0 problems. But I'm about to get the bigger 20inch Dcs677 saw soon that thing is a beast!
On clearance now for $89! snagged the last on in my area!
What store by the way?
Home Depot
Awesome!
Great video, I am having trouble starting it. It is the same model and I am using 5Ah battery. I did pulled back the break, as well as pressed the safety switch but still no response. Appreciate your inputs
Hmmm. Sounds like it should be serviced or returned. Sorry I don’t have a better solution.
Hold the side safety button while holding the trigger. When my saw's battery gets low it will stop in the cutting process so I change batteries. I'm thinking of getting a 60V Flex battery
Not trying to be a jerk, but that test at 4:00… either that chain is super dull or it’s on backwards. I have the same saw and with a sharp chain it’ll pull pretty hard. Plenty of torque. Also, the 14” bar mod makes it a different machine. Look at the Woodland Pro ArborMax Lite combo from Bailey’s Online. It’s like $34 and awesome.
Great info. I’ve been considering the 14” bar mod. Thanks! 👍
Yeah I have the same chainsaw and it cuts way faster than that.
Yes, strangely I was using the saw last week to cut off the bottom of Christmas trees and it was zipping through like butter. The wood I used in the video had been seasoning for a year.
Make sure you keep your receipt. I’ve had to return two of them due to not working. I’m gonna try another one, but it’s going to be the 60v
Yikes! Silly question, but are you remembering to push the brake forward?
@@BruceAlanR yes but I’ve gone through two saws. They just stop working completely. I moved up to the 60 V no problem at all.
Feel bad for the folks that had a crap experience with this saw. I beat the sh*t out of mine and I’ve had no issues with it. Well, aside from replacing the chain 4 times. Yeah, I definitely work the hell out of it regularly and it’s a little beast. 👍🏻😎👍🏻
Thanks for sharing your experience!
Question my chain came off. Cant figure out where it goes. It it under the sprocket or what hard to tell by picture
Sorry for the delayed reply. It goes around the sprocket.
Freeze frame it here at 2:38: th-cam.com/video/FYMRzzKXyo8/w-d-xo.html
I love the vid ,,I have the exact chainsaw,,the only difference is I use a 60v 9amp batter aka just a bigger battery
Thanks for the kind words. I'm guessing you use a 9Ah flex volt battery since it's a 20V tool correct?
@@BruceAlanR correct,,I need to sharpen my blades though,you heard me right,,blades,,one for females and two for the saw,,have a good one.God bless
Dude is your chain on backward ?
Ha! You would think at the rate this thing cuts.
Thanks Bruce very informative. Great video.
Thanks for the kind words. I’m glad the video was helpful.
I have the exact same saw. I just had to return it to Home Depot after about a month of ownership because it quit. Would not run for more than a second or two even with a fresh battery.
The new one works well, after an hour of cutting. I hope it stays that way!
Ugh! Mine is still working well thank goodness!
So are you still liking it? Thinking bout getting one
I still like it although sometimes I get lazy and grab the recip saw. 🤣
Your supposed to let the piece of wood fall so it doesn't bind up. When u cut it between the 2 cinder blocks it pinches the blade...
Makes sense! Thanks!
What is your recommended of oil for it and is it in auto zone
Any oil labeled as bar and chain oil should be fine. I use ECHO bar and chain oil, but I don’t think you’ll find it at AutoZone.
I want to get my hubby one of these after the holidays. How much did it cost on sale? I see that it's currently $179 online at home depot.
I purchased this in November at my local Home Depot for $99. I couldn’t believe the price which is why I didn’t hesitate. It will likely go on sale again so keep an eye out. Happy holidays!
@@BruceAlanR That's a great price. I'll keep an eye out for the next sale. Thank you and happy holidays to you too.
Thanks!
@@jackoneil7572 FYI Acme Tools [online] has this for $149 [+6.49 shipping] but you get a free 5Amp battery [normally $79].
$75
I need to know how to tighten a loose chain
Adjust the chain tension knob (1:09) in the video.
Fill gage is not to fill the oil, you should always fill to the top. The gauge is just so you can see where u are at during operation which will be upright and not on its side.
Good to know! Thanks!
I'm torn between this model and the 14" Ego, which definitely cuts faster based on what I've seen, but it only comes with a tiny 2.5 amp battery. I already have a couple 5 amp Dewalt batteries, so I can save some money there, but I think the Ego saw is a bit better.
My neighbor has the full line of Ego products (mower, blower, pole saw, chain saw) and he really likes them. They are expensive though.
Hard to take him seriously about a chainsaw when he has no head 😐
Can't argue with that. Thanks for the feedback.
Does it have a variable speed trigger, though?
It has a trigger, but it’s not really variable speed. It’s more like on or off.
Hello excellent video, but I have a question. I have 12 DEWALT tools that I bought with DCB606 batteries, now I want to buy this chainsaw to cut small trees in my yard, but according to home depot they say that I cannot use the batteries that I have because it will burn the motor, as it suggests that these are Models DCB205, DCB205G, DCB205CK or DCB205-2 What do you recommend in this regard, it is true that it would burn the motor or if I can use my batteries. Thank you
Great question! I’m going to call DeWalt’s 800 number and get back to you on this. The manual doesn’t specify which batteries can be used and this tool is considered part of the 20V Max system, which boasts being able to use any 20V max battery (even though it’s more like 18V).
Just thinking aloud, Ah is not a measure of power, but a measure of charge/run time, but how batteries are wired (series vs. parallel) impacts power. If I recall correctly, both 5.0 and 6.0Ah batteries are two or three rows of cells wired in parallel so there would be no change in voltage, just more Ah/runtime. If you were going from a 2.0Ah battery, which is wired in series (in which case you’d add up the voltage of each cell in the pack), to a 5.0Ah wired in parallel (in which voltage doesn’t get added up), you’d see an increase in power because there are more cells doing less work.
Anyway, I’ll get back to you once I hear from DeWalt.
@@BruceAlanR thanks for your help but I do a mistake the battery that I have the models are DCB606, if you have some news please let me know, thanks again
DCB606 is a 6.0Ah flexvolt which has more cells in it than say a DCB206. Either way, I confirmed with a nice woman at DeWalt (“Ana”) that there is no restriction on batteries for this saw and the DCB606 flexvolt is OK to use. That makes sense to me but I’m not a tool manufacturer. 😀
Thinking aloud again, Flexvolt switches from parallel to series to change voltage (you add voltage of cells in series and do not add voltage when cells are in parallel- that’s how it switches between 20V and 60V). Anyway, the 20 volts wouldn’t be the concern. The flexvolt has more cells inside (I believe there are fifteen 18650 cells). For comparison a DCB206 6.0Ah XR battery has ten 21700 cells. That would mean the cells in the flexvolt aren’t working as hard and would provide a little more power. Is that bad for the tool? The verdict is still out. I’ve heard of tools burning out when using a flexvolt battery; however, was it due to using a flexvolt battery? DeWalt hasn’t admitted to anything if it is and stands by their products. Take comfort in the fact that the tool has a 3 year warranty so if your flexvolt batteries are the issue, you’re covered.
@@BruceAlanR Thank you very much for explaining in detail the conversation you had with Ana, then I can safely use my DCB606 batteries, without any problem or concern that the motor will burn out, you mention that the tool has a 3-year guarantee but what happens if, for example, the motor burns out and dewalt says it was from using FLEXVOLT LITHIUM ION 20V/60V batteries==(MAX) 6.0 Ah/2.0Ah,
thanks again for your attention regarding my questions
I don’t think DeWalt would give you an issue, but if they did you can say you consulted the manual, which doesn’t specify which battery to use or mention any restriction on 20V max batteries that can be used… and that includes the flexvolt line. I’ve had positive experiences with DeWalt’s customer service in the past. I didn’t think the fence of my table saw was straight so I called with the part number and they sent me a new one.
Thank you for this review. I was hesitant in buying an electric chainsaw and after watching this review, I will stick with 2 stroke powered chainsaws.
Glad I could help!
What file size does it use? 4.0 mm?
I’m pretty sure it’s a 4.5 mm.
Great work
Thank you!
love the chain saw but is so light and small I found myself using it one handed bad bad bad
🤣
I have the 8" pole saw and it seems to cut faster and better than this 12" chainsaw. Thanks for the vid I was going to purchase this but I'm going to pass.
That’s great info. I’ll have to check out the pole saw. Thanks!
I have the pole saw also and would agree with that. I am wondering if they are putting a less agressive chain on the 12" to prevent kick back.
I’ve considered getting a new chain. That may be why it cuts so slow.
@@BruceAlanR if you do get a new chain please do a update video.
Will do!
Great review very informative
Glad it was helpful!
The oil sight window is not there for when you're filling, it's there for when you're using it.
With a gas powered saw, you fill the oil when you run out of gas, but with a battery powered saw, the window is there to help you remember to add oil.
Good to know thanks!
I really wanna see how good they are I wanna see it get forced to use cutting 1 time
Fair enough!
The oil cap requires a O-ring to prevent any leaks Their's a groove on the cap itself for the ring to go.
Good to know. Thanks!
I know this is 2 years late but, does the 6A 12V battery fit this saw? I'd hate to invest in the 60V system if i don't have too. Thank you in advance.
It will only accept 20V max batteries although it would likely work with a 20V/60V flexvolt battery. It don’t think it would work with the 12v.
Something is haywire in this video. That saw, given its chain is sharp, should cut those logs and 6x6"much faster.
I hear ya. I’ll have to get a new chain and see if it makes a difference.
@@BruceAlanRYour battery is weak. That's why you noticed a big change from 1 cut to the next. My 5 amp hour batteries will make 20 cuts like you did and will barely drain down 1 bar. Some Dewalt batteries won't last near as long as others just like them. This is a common thing with battery powered tools unfortunately. Always test the new tool with a known strong battery first.
@@jjoleboy Great advice and info! At the time of the video I was using batteries that had a fair number of charge cycles. I’ve recently been doing a lot of research on batteries and have opened a few older packs to test for unbalanced cell banks, check cell capacity, and all that fun stuff. The BMS systems in these packs are OK, but cell degradation does happen faster when the packs are used in the higher drawing tools.
Cool video!
Thanks you! Cheers!
Que aceite le pongo?
Yo uso aceite de cadena y barra Stihl
If it’s sharpened properly it will cut good
Thanks for the feedback. It was a brand new chain for the video. I wonder if it would cut faster with a flexvolt battery attached. Not even sure it would fit, it I may try it.
I could cut faster with a hand saw glad I seen this video so I know not to buy one
Excellent! I mainly do reviews to share my experiences with tools I buy. I try not to recommend products as I’d feel terrible if someone got them on my account and then didn’t like it. Luckily, DeWalt has the 30 day guarantee so you can try it and return it if you don’t like it.
Yeaaaa I doubt that….
He’s got a wicked sharp hand saw and biceps like the hulk. 😃
The chain brake has to be Back for saw to operate, Not Forward. The brake being forward means brake is engaged as when a kickback occurs and saw shuts down.
I doubt if kickback will ever happen with this low power limb cutter.
Thanks for sharing that. I haven’t experienced any kickback so far.
That chain is dull. And only 4 sharpenings? That is not much work
Fair enough. Thanks for sharing your thoughts.
Obviously it’s not as fast as a motor operated saw.
Thanks for sharing that!
Of course it isn't it's dewalts smaller saw. Dewalt released a much bigger saw called the dewalt dccs677 that thing with a 5ah battery is a beast and just as fast or faster than a mid range stihl.
How can anyone take this video seriously when the chain is on backwards.
HA! Well that might explain a few things.
Omg this is painful to watch!!! I have this saw and it will rip through a 6x6 in one tenth the time this guy is taking!! Uggghhh good thing you bought the dewalt to practice with a gas saw would eat him up!!
Ha! Thanks for sharing your thoughts and experiences.
blah blah blah
Not a good cut. Making way too much loud noises
Thanks for sharing your experience.
Looks like very slow to cut
Yes, it’s definitely not as powerful as gas. I was using my neighbor’s gas saw the other day, and it’s no comparison.
This saw is a real piece of Shite. I got one and it worked for about 40 minutes altogether and stopped working. The brake trigger switch was faulty and it was a nightmare to fix. From looking up how to fix it , i discovered it is a common problem with these saws. So had to send it back to DeWalt to fix and return it took months. And then it happened again same issue.
Ugh! Thank you for sharing your experience. That sucks that it takes DeWalt that long to turn around a repair. I recently had to send one of my Milwaukee tools back for service and they had it back to me within a week… although, they ultimately assessed it and sent me a brand new tool instead of repairing it.
Mine works great! You should of picked a winner. 😂
Ok...so it's not just me. This chainsaw is weak.
One user said my 5 Ah batteries were old and that his chainsaw rips through logs; however, my batteries aren’t old so I can only assume I’m the problem. 🤣
In doing some research, it may be that the XR 5Ah battery isn’t the best fit for the chainsaw. May require a more powerful battery for better performance. A bigger battery doesn’t mean it provides more power, just more run time. I’m going to do some testing.
I had one of these and it quit 4 years later after about 15 hours of runtime. Garbage. Don't buy.
Yikes! Thanks for sharing your experience.
Get yourself a hockey mask and go Jason on all the kids at Camp Wobegone,
Ha! Good idea for Halloween although I think if I was wielding this little chainsaw I’d just get a few laughs.