Very smart of them to send you that light set. It would have cost them a lot to have a crew set up and film an instructional video this good. If they are super smart they will put a link to this video on their website.
Super awesome FAB! I’ve always wanted to add those to my garage ceiling, but obviously for novelty lighting it’s too expensive when I want other detailing tools first. But WOW! Those look awesome! Super happy for you and can’t wait to see your next detail job with those lit up! 👍👍
Great instructional video! The lights look great. You'll probably really glad you installed them where you wanted now vs. having to have moved them all later.
Where can I get the switched power cord to complete the electrical connection for the lights? I bought the smaller version of their kit without the square outline around the hexagons and it's only a 2 wire in stead of 3 wire.
Results look great, very decorative. They do not look to be UIL approved or at least not included in their. Amazon description. I think using a laser light would help to keep the outer grid straight since working overhead.
They looks awesome. I’m not sure if they are UL or ETL listed. Funny thing is I h e a laser level that I got out to use and the batteries had corroded and it would not work with new batteries. It’s always something
By chance can you confirm the measurement of the interior honeycomb flat piece to the flat piece on the opposite end? So the honeycomb portion has a measurement of length that isn’t in mm or whatever measure they used 😂
I used plugs that came with some lights I got off Amazon a long time ago. I would recommend going to the hardware store and getting heavier duty plugs as mine get hot after about an hour.
im going to start detailing cars on weekends, and i want to know the polisher i should start with, a rotary or a DA? i already used the rotary, the results were great
I always stick with what you know but it would hurt to buy a DA polisher for finishing the paint. The Griots G9 is a great inexpensive polisher with a lifetime gurantee
I plan on using the hex over the main section of my garage and the square separate for the bump out of my garage
That looks great! I too have admired those lights when I watch Larry's (AMMO NYC) channel. Great video!
Thank you!
Hi this is Joe from Staten Island receive my mystery boxes and they were fantastic thank you very much and that lighting looks cool😀
Hey Joe glad you liked it and it arrived safely. Thanks
Beautiful! Its like moving art work.
Yeah it’s very cool in person
Hi Brian those hex lights are amazing, the light out of them is is something else 😎😎
They are crazy bright!
Very smart of them to send you that light set. It would have cost them a lot to have a crew set up and film an instructional video this good. If they are super smart they will put a link to this video on their website.
Thanks!
The hex lights turned out awesome!
Thanks!
Super awesome FAB! I’ve always wanted to add those to my garage ceiling, but obviously for novelty lighting it’s too expensive when I want other detailing tools first. But WOW! Those look awesome! Super happy for you and can’t wait to see your next detail job with those lit up! 👍👍
Thanks brother! They are definitely a novelty item in my book but man are they cool
Great video and review Brian lights came out awesome . Definitely a nice touch and look it gave to the space.
Thank you!
Lighting looks pretty cool Brian💡👍👍 The next lighting you need is LED lighting that looks the American Flag🏳 🌎
Thanks brother. Oh man that would be amazing! 🇺🇸
Great job looks great can wait for the time you move the shales for car 🚙 job’s
Thanks! I can’t wait either it bothers me that I can’t.
Great instructional video! The lights look great. You'll probably really glad you installed them where you wanted now vs. having to have moved them all later.
Thank you! Yes definitely glad I installed them where they will stay.
Youve shown more than enough to make this install much easier.
Where can I get the switched power cord to complete the electrical connection for the lights? I bought the smaller version of their kit without the square outline around the hexagons and it's only a 2 wire in stead of 3 wire.
Now just have to talk my wife into getting these lol. Nice review man
Thanks and good luck! 😂
They look FABULOUS and makes me want to get a set! 😮😎
They are very cool!
Results look great, very decorative. They do not look to be UIL approved or at least not included in their. Amazon description. I think using a laser light would help to keep the outer grid straight since working overhead.
They looks awesome. I’m not sure if they are UL or ETL listed. Funny thing is I h e a laser level that I got out to use and the batteries had corroded and it would not work with new batteries. It’s always something
Very nice video!! I’m ready to install mine now!! 😁
Thank you! They look awesome but more for show them anything else.
@@FABAutomotiveDetailing 👍👍 thanks
@@RaldasDetails You are welcome!
By chance can you confirm the measurement of the interior honeycomb flat piece to the flat piece on the opposite end? So the honeycomb portion has a measurement of length that isn’t in mm or whatever measure they used 😂
Did you ever find out if the CRI on these are actually accurate?
In feet what's the approximate size 6' by 12?
What plugs did you use , instead of hardwire them in , that option seems better for me as well?
I used plugs that came with some lights I got off Amazon a long time ago. I would recommend going to the hardware store and getting heavier duty plugs as mine get hot after about an hour.
Lighting is key👌
Yes it is!
My handyman/electrician speaks English but only reads Spanish. Did the instructions also come in Spanish?
Good work
Thanks!
How did you wire up the lights?
im going to start detailing cars on weekends, and i want to know the polisher i should start with, a rotary or a DA? i already used the rotary, the results were great
I always stick with what you know but it would hurt to buy a DA polisher for finishing the paint. The Griots G9 is a great inexpensive polisher with a lifetime gurantee
Too much for me! Woooo
Grats .
Well deserved
Why does the instructions say you need all 3 connectors going to outlet is that true can't you just use 1 for the square and 1 for the hexagon setup?
That’s what I did on mine just one on each
Very cool , just not $700 dollars cool.
Nice job Brian. Take care.
Thanks! I agree it’s expensive
I just doubled the amount of LED lights in the Barn/Garage
Lighting is key
What is the link for your website?
The link to the lights is in the video description
They look cool but I think they would give me a headache after a while trying to detail with them. 👍
They will give you a headache at first for sure!
Why so many pressure washer foam guns?
I guess tonight’s chat will be brighter.
If I do a live they won’t be on.
nice light but when you spend 700 dollars you think you would include 10 dollar screws lol
I agree! I actually spend like $4 on the screws so I don’t know why they wouldn’t be included
1st
🏆
Way to much for novelty lights
I’m not going to disagree with you but they are cool
@@FABAutomotiveDetailing For sure I'm putting them up if someone sends them to me! Thanks for all your videos
@@gregmannos You are welcome!
1st
🏆