The electronics built in the video aren't what is finally shown to be running. Eg, at 5:32 we see two battery holders, but only one was installed. Furthermore, it's clear that the HC-SR04 isn't hooked up, and due to the way it's mounted, won't allow for as easy access as this purports.
there were most likely two batteries hooked up do to the induction fan . a single 3.7 volt wont be enough to drive everything so using 2s is the way to go
Is this a vacuum cleaner that avoids collision? if yes do you mind to share the programming code? And is possible if infrared sensor is used instead of ultra sonic sensor?
Your build is a bit 'unreal'. The setup which you showed in minutes 4:48 has ultrasonic sensor connected to arduino. However, the demo on minute 5:09 onward showed (when you opened the robot) that you did not use arduino, the ultrasonic sensor was not connected to anything. Could you explain why the demo build on minute 5:09 did not use arduino? It was a different 'robot'.
Its an fake video guys the robot is not working automatically as you can see at 5:03 she showed that the sensors are connected with wires but at 5:30 when she removed the body you can clearly see the sensors are disconnected so all that means is its controlled by remote
If you are an interactive TH-camr who is willing to share thoughts and ideas after making such a wonderful model, you must answer to the questions. I saw many comments asking for the list of materials used and the codes. But you replied to none of them. This isn't fair. Your subscribers are eager to learn more but you're just ignoring them. This should not be the case. I hope you can definitely share the codes and list of materials. Thank you.
I don’t think 💭 you want much engagement after doing a sweet project like this You just find it difficult to answer questions like list of major materials used, circuit diagram and code used
The electronics built in the video aren't what is finally shown to be running. Eg, at 5:32 we see two battery holders, but only one was installed. Furthermore, it's clear that the HC-SR04 isn't hooked up, and due to the way it's mounted, won't allow for as easy access as this purports.
there were most likely two batteries hooked up do to the induction fan . a single 3.7 volt wont be enough to drive everything so using 2s is the way to go
Very simple and useful robot and also easy to make 😊
thats so sigma
Adding the Ears puts your project in the world class "CAT"egory . Awesome job
Yes, cat.
Yes can you give the list of all things that use
😅😅😅
It's will help to my project....tq
Q1q
0:14 feels like its snorting stuff lmaoo
Can you give all the materials needed or sometime name one by one the materials use?
watch until the end
Love the simplicity of making..
Very nice
halo mas di
Nice Helps
Me with my Project 👍
Is this a vacuum cleaner that avoids collision? if yes do you mind to share the programming code? And is possible if infrared sensor is used instead of ultra sonic sensor?
u cant use ir sensor instead f ultrasonic
Your build is a bit 'unreal'. The setup which you showed in minutes 4:48 has ultrasonic sensor connected to arduino. However, the demo on minute 5:09 onward showed (when you opened the robot) that you did not use arduino, the ultrasonic sensor was not connected to anything. Could you explain why the demo build on minute 5:09 did not use arduino? It was a different 'robot'.
Fake even he/she did not use any ardu code
its possible, i can get you the code if you want. I just made one actually
@@pulinshah4951 could you please send me the code? Thanks in advance
@@justADeni sure
@@pulinshah4951 please send the code
So basically you taught us how to make a cheap roomba
Can you show its switch and battery connection clearly
My son ❤this
Hey it would be great if you could share the code, because I want to make one to give to my school
where is code?
did you find
Wow cool! But what are the electric components?
He gave at the end of the video😊
Can u share code and schematic. What did u use for it. Thank u
Yes
Yesss
Ole bhai
It does not need coding
@@lonetahira705 ur mom.
It does.
Very very very thank you this is help for me I will subscribe your channel and you shown the equipment's it will help for me thanks again
How to make the most easiest robot vacuum
Get a vacume get a box cut the box where the vacuum mouth piece is get wheels stick em on BAM
Lol
Amazing idea. Thanks
Where can we get the code?
Yes bro where is the code
Code share kardo and circuit diagram
Where is the code
Congratulations .👏👏👏İnteresting and great yeah 👌😇☺
UB
What an apsloute legend
Vacuum maker
If you try you have to code
Its an fake video guys the robot is not working automatically as you can see at 5:03 she showed that the sensors are connected with wires but at 5:30 when she removed the body you can clearly see the sensors are disconnected so all that means is its controlled by remote
superb, u need to make it more advanced
Nice think
Nice video
I like this robot but can give all material name one by one 🎉
Is this a collision avoidance vacuum cleaner? If yes, would you mind sharing the programming code?
Pls
Beautiful. Love it!!!
It is good 😃👍👌
Really awesome
, have a good day
7 Minutes Creative she is a girl
Michelle Kernitsman yes thanks
7 Minutes Creative can u tell me which machines hw used
If you are an interactive TH-camr who is willing to share thoughts and ideas after making such a wonderful model, you must answer to the questions.
I saw many comments asking for the list of materials used and the codes. But you replied to none of them.
This isn't fair. Your subscribers are eager to learn more but you're just ignoring them. This should not be the case.
I hope you can definitely share the codes and list of materials.
Thank you.
He is a money sucker and only wants us to see the adverts “cachcows” and not recreate his contraptions 😠
@@samuelfellows6923 Right bro. 👍🏻✅
Can you tell me how many volts and to which pins the fan motor will be connected?
2 s so two times 3.7 volt
Code please
You didn't mentioned the fan thing that you used in this project
And please reply as soon as possible plesse😔
That's great project. please give me the code..
hi can i have the materials list you used, diagram etc...
Hi i have the materials list
@@antoniojoao5874pls can you give it to me, i need it for my project class
@@antoniojoao5874can u comment it here please ? Especially the cm of the robot’s body
Thanks for this 😝😜🤪😜😜🤪😝😜😜🤪🤠😎😎😎👍👍
It's so amazing
plzzz give me codes for this project im doing this project i have only 3days time left
AMAZING! LOVE IT
sabes el codigo??????
Do you know which is the code?
it's good but I can't understand what are the materials required
I don’t think 💭 you want much engagement after doing a sweet project like this
You just find it difficult to answer questions like list of major materials used, circuit diagram and code used
He is a money sucker and doesn’t care ~ how many adverts were in this video? - 😠
This is very cool thanks for sharing...
Hi, please give me the code for this project
Thank you
how do u make or where do you find a circuit board ?
Thank you so much
Can u lend me this project for one day 🥺🙏
you didnt give us code
Please
give code sister please
please
Please Sir.................
Yeah. Please give
Pls
In this will get help to cleaning the floor
Aurdino coding also please show it
List shown is incomplete. Did not mention suction pump, Sensor for stairway etc.
4:01 where can i get this thing... Pls i need the name of this thing asap 😓 and where can i buy it online
👍👍👍👍
From where we will get the programing for running the system
Kutte
Amazing
This was the best thing i ever seen😂❤️
Super☺
hummmm, the materials?? idk how i can do it if i don't know the things what i'm doing to use :i
arduino and cable
motor driver shield
jumper wires
gear motor (3) and wheel
brush motor
ultrasonic sensor
even battery
Please share vacuum robotic cleaner remote control 🙏
Nice try.
Great Job
Nice job
Amazing!!
Really creative
5:42 equipments needed
Please can you tell the material which has usen in this project
Super
5:42
Please 🙏🙏 can I get one by tomorrow morning 🌞
Please i want the code because i want to do this for my project
Me too
@@ajmalbinnizam did you find the codes guys?
did you find the codes guys?
just plug it in to arudiono and it'll work! /s
so it just pulg n play?
the ultrasonic sensor wasnt even connected 5:39
omfg i don't see that
I love you
Ok this is good
SOi ,QUISE. DESIR BENJAMIN 😚😙😘😍
but so cute it is
Material please 🥺🙏
Dude it's just an obstacle avoiding robot 😂 with an additional vacuum
Does this product use a programmer?
PROGRAM FOR ARDUINO PLEASE
Did u got the program ?
@@anjani8732 i don't think he did
I do know . I study robotics
@@STR_IKER could u pls give
@@STR_IKER hey plz share the programme
it is so freaking difficult, pipipipi ;(
how many volts battery did he use in the video please say me and how many volts dc motor for wheels
I can do it to 😊😊😁😁😁😊😊😊😊😁😊😊😊😁😊😁😁😊😁😁😁😁😊😊
What is the name of the fan which you have used
Hey, would you be open to building a cardboard prototype?
Good
You forgot all about the designed-to-wear-out parts, so you have a steady income of clueless customers.
wow can i have the code seftwir
please
Did anyone noticed that this video doesn't support playback speed 🙄
Don't know why but you could take a look for yourself 😶😶
Works for me
Great Job where is the code for this project?
What is of the item 4:00 it is fan ? What about the real name , spec ?
Did you find out the name of that?
Which type of sensors and others you have used
❤❤rjirk
The building part is accurate but the demonstration bot was controlled by a remote....fake but possible if you have the code to operate it...
were did you bought all the stuff?? or were can i get it??