I had to take a moment to let you know this is the most informative short I've seen in at least a month. You took time to explain geometry in a way that most could understand.
Keep putting out content we've been looking for you. Someone who can explain and straight to the point. Others explain a 5-minute video and still don't explain anything.
@Temple Builders Carpentry aye no doubt bro. I'm a shop teacher, I teach 12th grade Carpentry in NYC, and I'll tell you how much basic math has been lost within our youth. I have to spend time revisiting topics like converting fractions, decimals, and percentages, angles, reading a ruler and basic geometry. You are helping a ton of people by doing this man so thank you!
So with the speed square you mark both woods at 16 degrees and can cut it with a hand saw or is the 16 degree for mitre saw? Im just doing diy at home and have a similar angle..just learning at beginner level. Thanks
Excellent 👌. Short and to the point. You captured the whole sea in a cup. I was looking for the answer of this question of calculating the angle for my garage DIY project since 2 days. Couldn't find the answer in any other video than this.
Also, if you go the other direction with the speed square, which would give you 58*, you can just add to 90* instead of subtract from 180* which is usually easier to do in the head
so you're saying if you start with the side without the perpendicular base and draw a line on the base and pivot counter clockwise ot would give you 58 with regards to this video and you'd add 90?
Great video bro. To the point. Speedy might be the most underrated tool in your pouch guys. There is a reason contractors have 16 of them in their truck. You can do exactly what he just did with two of them and no pencil line, over numerous applications.
I appreciate you sharing your experience with this channel and with future carpenters and tradesmen. I would like to show that double speed square trick you just explained if you don't mind. That was a great idea. Thanks for commenting.
Dude you are awesome you should start making more videos on stuff like this I’ve have wondered for everything how to find an angle with speed square and this was a wonderful job on demonstrating it
Idk, the flat base of your speed square should throw the measurements off unless when you rotate your square you keep it parallel the other side and away from it by the thickness of that base piece.
I see what you're saying. Usually when I confirm it with the angle finder it's within 1 degree or a half of a degree of accuracy. But like you said if you hold it from the wall the same thickness as the fence you should be good.Thanks for commenting.
I found this channel the other day and I have been watching since then. Great content and knowledge in all of the videos I have watched. I am learning tips and tricks! I subscribed. Thank you!
So many you'll see working in trades don't know proper terminology, basic math, common sense etc. Thanks for setting a great example! Your knowledge and understanding of these concepts comes through in all the videos great job.
My pleasure! I agree the quality of craftsmanship has been on a decline for years.The trades need more people that take pride in their careers. Thanks for commenting.
What if you have bumps and dips in walls. I’m still a bit old school so prefer to mark two parallel lines along each wall and draw a line through intersection. I have two sliding bevels to mark left and right cuts. I always cut a little bigger to allow for any deviation in wall and floor and trim accordingly with electric mitre saw.
Fantastic. We need this kind of quality content.
Thanks glad you like it.
I had to take a moment to let you know this is the most informative short I've seen in at least a month. You took time to explain geometry in a way that most could understand.
Thank you, I really appreciate your feedback.
This man is skilled 👍🏻
You can tell that man loves his job!
Keep putting out content we've been looking for you. Someone who can explain and straight to the point. Others explain a 5-minute video and still don't explain anything.
I'm gonna keep it coming. Thanks for commenting.
This guy is incredible! Easily the best short I've seen.
Thanks Joshua I appreciate you commenting.
@Temple Builders Carpentry aye no doubt bro. I'm a shop teacher, I teach 12th grade Carpentry in NYC, and I'll tell you how much basic math has been lost within our youth. I have to spend time revisiting topics like converting fractions, decimals, and percentages, angles, reading a ruler and basic geometry. You are helping a ton of people by doing this man so thank you!
That Temple Built had some FIRE behind it man!! Thanks bro this is handy when in a pinch.
You're welcome, Fatal. Thanks for commenting
Excellent, very well explained. Don't you wish they were all like this good.
Thanks for the feedback.
*Fastest way*
Full angle) 180 - 32 = 148
Cut angle) 32 / 2 = 16
I agree thanks for the feedback.
So with the speed square you mark both woods at 16 degrees and can cut it with a hand saw or is the 16 degree for mitre saw? Im just doing diy at home and have a similar angle..just learning at beginner level. Thanks
You forgot minus 148 from 180 to get that 32.
@lukemccann4061 no you get 32 from the square
Are you halving the angle?
Excellent 👌. Short and to the point. You captured the whole sea in a cup. I was looking for the answer of this question of calculating the angle for my garage DIY project since 2 days. Couldn't find the answer in any other video than this.
Glad it was helpful! Good luck on your project. Thanks for the feedback.
Keep pushing. The blessings you are leaving… must inspire you. Beautiful to c.
I will. Thanks for commenting.
Thank you so much for sharing. 😊
Thanks for watching! I appreciate your support.
Also, if you go the other direction with the speed square, which would give you 58*, you can just add to 90* instead of subtract from 180* which is usually easier to do in the head
Yeah, that's right. I didn't think about going in the other direction. Thanks for the added breakdown.
so you're saying if you start with the side without the perpendicular base and draw a line on the base and pivot counter clockwise ot would give you 58 with regards to this video and you'd add 90?
Just bought a speed square and the amount of uses it has is crazy! Great vid mate 👍
It's one of my favorite tools. Thanks for the feedback.
Love it... cheers!
Cheers! Thanks for commenting.
Great tip thanks brother 🎉
No problem. Thanks for the feedback.
So true and so simple wow!!! Thanks from making it so simple!!!! With Simple Math that’s it!!!
Thanks for the feedback and I appreciate you commenting.
You’re very welcome!!
Great explanation
Thanks for the feedback.
Great explanation on or to use the speed square
Thanks for the feedback, and I appreciate your commenting
I appreciate your videos. They're always loaded with great explanations for everything! Thank you, TBC!
My pleasure! Thank you for all the support you gave to this channel. Thanks for commenting.
This is it right here! Great explanation 👌🏿
Thanks, Brodyb ,and I appreciate your commenting.
Great video bro. To the point. Speedy might be the most underrated tool in your pouch guys. There is a reason contractors have 16 of them in their truck. You can do exactly what he just did with two of them and no pencil line, over numerous applications.
I appreciate you sharing your experience with this channel and with future carpenters and tradesmen. I would like to show that double speed square trick you just explained if you don't mind. That was a great idea. Thanks for commenting.
@@templebuilderscarpentry7043 bro absolutely! Thanks for the love. Appreciate you.
Great stuff thanks for sharing
Thanks for watching!
This is actually very informative
I appreciate that. Thanks for commenting.
Man every short you put out is chock full of info. I watch them like 3 times over every time. Appreciate you
Thanks, and I appreciate the support.
Light on the subject....learned something today....thanks!
No problem. Thanks for the feedback, and I appreciate your commenting.
Thank you brother
No problem , thanks for commenting.
Amazing!
Thanks, Alaska Wild .
This is great thanks, one tip though, just subtract the first angle from 180 instead
I agree it's a faster method. Thanks for commenting.
Subscribed.
Welcome aboard I appreciate your support. Thanks for commenting.
Subscribed
Welcome aboard! I appreciate your commenting.
Simple easy to understand well done friend👍
I'm glad you liked it. Thanks for the feedback.
Thanks
No problem! Thanks for commenting.
I wouldn't worry about the angle, that's easy. You might want to talk to your painter!
I wouldn't say the angles are easy. As for the painter, he had one to many that day. Thanks for commenting.
A drunk inexperienced painter can still do a good job if... They know what their doing.And Stoners are decent painters @@templebuilderscarpentry7043
Dang. That was good.
That’s one expensive protractor. 😂
If it works, it works! 🤙🏽
Thanks for commenting.
This guy rocks! Keep thr videos coming bro!!
Thanks! Will do!
Thanks!
Your welcome Ed. I appreciate you taking time out your day to comment.
Gotta love how useful geometry is. Great vid!
Thanks! I appreciate your commenting.
Excellent ! I love your technique 😍 ♥️
Thanks, I appreciate you commenting.
Brilliant tip. Thank you.
I'm glad it was helpful! Thanks for commenting.
thank you for this fantastic tutorial!
Glad you like it! Thanks for commenting.
The way you subtract 32 from 90 and add it to 90 is smart shit
I appreciate that. Thanks for the feedback.
Awesome explanation!!
Thanks. I appreciate your commenting.
Thank you sir!🫡
No problem. Thanks for commenting.
Wow thank you I did not know
No problem! Thanks for commenting.
Nice!
Nice bro, thank you!
Well done sir, following as a subscriber!
Welcome aboard! Thanks for commenting and I appreciate your support.
yo thank you g!!
No problem I appreciate you commenting.
Wow! Can’t get any easier than that!!!
Thanks for commenting.
Thank you very much, I'll definitely be using this trick
You're welcome, FuzzyThoughts . Thanks for commenting.
Noice 👀👌🏽🔥saving this shit for later
Thanks for the feedback.
Simple high school geometry 📐 and you guys said you wouldn’t use it outside of school.
Some really good tips buddy!
Thanks Andrew I appreciate the feedback.
BUILD!!!😂
I like!
Thanks, I appreciate your commenting.
Earned my sub!!!
Great! Welcome aboard, and thanks for commenting.
That's cool
Thanks, I appreciate your commenting.
School time with Temple! 😊
We Problem Solvers! Thanks for commenting.
Perfect short I’m forwarding this to my swabby for reference.
Temple BUILD 😂😂😂😂😂😂I love it good video thanks man
Thanks for commenting .
Awesome! Never seen this before. Thank you for this
No problem! Thanks for commenting.
@templebuilderscarpentry7043 i hope your channel grows. You deserve it - great stuff
I’m gonna start trimming the house and this was hands down the best short I’ve watched yet. Keep it up mane! 🤘
Thanks DMP I appreciate the compliment. Thanks for commenting.
Dude you are awesome you should start making more videos on stuff like this I’ve have wondered for everything how to find an angle with speed square and this was a wonderful job on demonstrating it
Thanks Aaron I will be making more speed square and framing square videos . I appreciate you commenting.
Idk, the flat base of your speed square should throw the measurements off unless when you rotate your square you keep it parallel the other side and away from it by the thickness of that base piece.
I see what you're saying. Usually when I confirm it with the angle finder it's within 1 degree or a half of a degree of accuracy. But like you said if you hold it from the wall the same thickness as the fence you should be good.Thanks for commenting.
I just learned something. Thanks !!
Glad to help. Thanks for commenting.
Right on 🤛
I appreciate you commenting.
🔥🔥🔥🔥🔥
thanks man. I learned something new
No problem! Thanks for commenting.
This is good stuff
Damn nice!!
You’ve been doing this a while bro, thank you for sharing 👍
You're welcome, Justin. I appreciate the support. Thanks for commenting.
🔥
Yes. Thank you!
You bet!
You explained how to do this better than my school did!
😂 thanks for commenting.
Love it, man
Thanks for the support.
I found this channel the other day and I have been watching since then. Great content and knowledge in all of the videos I have watched. I am learning tips and tricks! I subscribed. Thank you!
Welcome aboard! I appreciate you subscribing to the channel. If you have any questions just ask. Thanks for commenting.
@@templebuilderscarpentry7043 Earned my subscription as well after watching the knee brace/framing square videos. You're videos are great.
I needed this, getting ready to do some cutting
Hope it helps you out. Thanks for commenting.
Bro 🤯💯
Thanks for the feedback.
Temple builds!
What's up, Maxwell! Thanks for commenting.
Damn straight! Know your equipment and know your job!
You know your stuff my man
Thanks Wallace. I appreciate you commenting.
Great explanation- made more sense than the last guy
Thanks. I appreciate your commenting.
Oooh you love to see it
Thank you I was wondering how to do this
No problem! Thanks for commenting
Potna sound like my uncle. Dopest tip I’ve ever received. 22 year stone mason.
Thanks andre.
thanks for the video bro. this helped me out
Glad I could help
Thank you
Good carpenter.
Thanks I appreciate your commenting.
This is exactly what i was looking for 👍🏻👍🏻
Glad to help I appreciate you commenting.
So many you'll see working in trades don't know proper terminology, basic math, common sense etc.
Thanks for setting a great example! Your knowledge and understanding of these concepts comes through in all the videos great job.
My pleasure! I agree the quality of craftsmanship has been on a decline for years.The trades need more people that take pride in their careers. Thanks for commenting.
Very well done also
I appreciate the feedback.
Brilliant bro thank you for sharing 👍🏼😊♥️💐
Thanks for the feedback. I appreciate your commenting.
Real pro love to see it
Thanks for the feedback and I appreciate you commenting.
RIGHT ON BRO AWESOME SHIT
Damn. You make it so easy
Thank you and thanks for commenting
B ro! thank you for the angle locator loc!
No problem. Thanks for commenting.
i am glad to comment, it pushes your videos up! thanks for responding!@@templebuilderscarpentry7043
What if you have bumps and dips in walls. I’m still a bit old school so prefer to mark two parallel lines along each wall and draw a line through intersection. I have two sliding bevels to mark left and right cuts. I always cut a little bigger to allow for any deviation in wall and floor and trim accordingly with electric mitre saw.
Great advice. Thanks for sharing your experience.
I didn't know we had to subtract that angle... This just saved me hours of stress!
Thanks for the feedback.
Man saved me
I'm glad it was helpful. Thanks for commenting.