How to Change Rear Brakes and Rotors 2007-2014 GMC Yukon Tahoe Silverado Sierra
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Brake pads here: geni.us/1BZdQ (affiliate)
Slotted Rotors here: geni.us/1wk2W (affiliate)
Entire Kit here: geni.us/uvWR (affiliate)
How to change your brakes and rotors on a 2014 GMC Yukon. This is going to be similar for a 2007-2014 Yukon, Silverado, Sierra and Tahoe. It is an easier job than you think and you can do it and save some money. I had to replace both brakes and rotors. Sometimes you can have your rotors turned instead of buying new, but I did not have enough thickness for them to do it. Had to replace with new.
Brake pads here: amzn.to/3NupH9H (affiliate)
Slotted Rotors here: amzn.to/3Ntz61p (affiliate)
Entire Kit here: amzn.to/434hpet (affiliate)
Will you support me if you enjoy my content? Do you enjoy my how to's, DIY Projects, product reviews and more? This way I can make more videos for you.
www.buymeacoff...
Thanks so much!
Do you want FREE weekly updates? DON'T MISS OUT! Subscribe here so you will see the next episode: bit.ly/XvGgSq
Do you love what you see? Would you like to Support my channel so that I can continue to make more awesome videos? Just click on the Fan Funding Icon on the video at the top left hand corner. Or click the icon on my home channel page to learn more! Thanks so much!
VISIT MY WEBSITE:
therykerdane.com
SOCIAL NETWORKS:
Twitter: / therykerdane
Instagram: / therykerdane
Pinterest: / therykerdane
Tumblr: / therykerdane
Google+: goo.gl/EQCzWP
Want to see more? Watch my other videos for tons more information and tips on a variety of topics!
Subscribe and Comment below! Hit that like button and share with your friends! Your feedback is welcome!
Have an idea for a video? Send me a message! Let me know what YOU want to see!!
PLEASE Subscribe here: bit.ly/VYTndq
THANKS FOR WATCHING! and I WILL SEE YOU LATER! - ยานยนต์และพาหนะ
Thank you for taking the time to make the video. Very helpful.
I think once you're in that deep, its a good idea to pull the slider pins out to clean and lube (hi temp brake grease) and also replace the boots if they're torn. Sticky/dry pins can cause one pad to wear much faster than the other pad on same wheel.
Silicone brake grease on them pins
Hi, remember when instaling the pads you have to make sure the wear indicator is located against the driving forward disc rotation, if the one you are installing is in the oposite side(up or down), then it is for the wheel on the other side of the truck, also take in mind you need brake grease, any other will flow with heat and damage the pads in daly use.
Great video, wished he would have shown how difficult it was to break the nut on the calibers.
aint no thang with a 24" breaker bar with another 36" of pipe on it haha
@@MrAwsomeshot facts
My rear passenger brake caliper bracket bolts came out easy. But the rear driver brake caliper bracket bolts using PB BLASTER, a 1/2 breaker bar, cheater pipe, hammer and muscle were not budging. Had to use heat to get those two bolts you mentioned loose. It was like they used "red" permanent locktight on those two bolts. (The driver side bolts are difficult because it's harder to get good leverage on that side).
Hi. Do you happen to know the necessary tools to change the front and rear brake pads for a 2007 GMC Yukon Denali 6.0 liter engine? Any feedback would be greatly appreciated. Thank you.
South Carolina in the building
No greasing the anything? 😭
Thank You!👍👍👍
Brake pad with wear indicator, u have put on outside, it is supposed to be inside or else caliper will not fit.
Some are different but the wear indicator is usually on both sides
Thanks 👍🏾
Best video yet. Thank you so much
Glad you liked it!
@@TheRykerDaneI have a 2014 Silverado. My rear Rotors are Stuck on. Even hitting with the hammer. Yours just pulled off. How can I get mine off?
You took out the clips holding the rotors when u put the new ones do u put back new clips or u don't need them
You can put the clips in if you want. they are warning clips for when the pad is thin
@@TheRykerDaneHe is asking about the copper clips on the stud that hold the rotor in place
I came here to see which way the rear bolt came out and it was skipped... on to another video
Awesome. Thanks..
After changing out pads on my 2007 Chevy Suburban and going for a test drive, the driver side rotor was extremely hot compared to the passenger side (450 degrees F using my infrared temp gun). Any idea why the overheating condition on the one side only (NOTE: I took everything apart to ensure correct installation)
Any issues with the e brake hanging up that caliper? You figure it out?
Why did you decide to replace the rotors? How can you tell if they NEED it? Also, why didn’t you replace the copper clip like on the OEM?
He took the rotors in to be turned and they were worn past the point where they could be turned.
Can not get the caliper bracket bolts even with penetration oil and a breaker bar
Any tips to breaking those bolts free😫 I literally tried For hours and still couldn’t get one off
Great video I'm I. Mine
Nice video, but I'm pretty sure the socket is metric not standard.
Why no body told me to make sure the parking brake was off 🤦🏻♂️
What would happen if I forgot to open the brake fluid reservoir?
I never do. You can just bleed them later on or they may end up being completely fine
The cap might pop off and maybe splash some brake fluid in the engine compartment.
*13 mm. There are no standard bolts on gm vehicles.
But u aint show how u got the Brake Bracket off 😎😎😎
Truth... like it if you showed where you jacked the car up and where you placed the stand, I am not sure on the back. Sorry new do the DIY and don't want to mess up
jack it up on the frame that runs down the side of vehicle. Not door the thick steel frame
@@ElectronicsWired I got a 2014 Yukon and it has that braket where behind the back door to the rear axle, and the dealership has told me not to jack it up from behind that point. I'm sorry I forgot to mention that...
@@quinjes5read your owner manuals book. Should tell you everything you need to know 👍🏼
Could not watch the whole video you shook the camera so much.