DJI SPARK IMU ERROR 71 Accelerometer - Try this TAP FIX B4 you send it back to DJI for repair !
ฝัง
- เผยแพร่เมื่อ 25 ม.ค. 2019
- If your DJI SPARK IMU won't calibrate - and you have the error number 71 - please check this possible fix. It could save you a lot of time instead of sending the SPARK back to DJI to fix. It also can really be done in less than 1 minute !
You don't have to really find the old DJI Assistant 2 (version 1.1.2) mentioned in the clip - unless you really want to check your X, Y, Z axis accelerometer readouts. The tap alone may be all that is needed to fix error 71 !
The DJI Phantom forum post that lead me to this SPARK fix - was at
forum.dji.com/thread-42103-1-...
Once again - thanks to Zandegran for that post !
This actually works! I crashed my mavic air 2 and my imu wasn't calibrating correctly so I did this tap and my imu is now working correctly.
Sweeet !!!! Thanks 🙏🏽 worked on the first try after tapping the y axis
How can o read the IMU for dji avata, it has almost same sensor error and imu calibration required, tnx
U sir helped me alot! My ☓-Acc is at - 16.. While my y-acc is - 0.07.. So clearly the problem is in the X-Acc.. Im just wondering which side i should tap on now..
I guess its try and error from now on...
Hello, i have the same problem too with the x -acc. What did you do??
@@kurtjohnacephotography5951 sounds unreal, but I hit at the back of the drone... On the spot where u insert the the SD card / where you turn on the Batterie... It worked.. My drone is back in the air again...
I crashed my drone and now its showing error 71. Already checked the calibration on Dji Assistant. The X axis is stuck on 16.054. Any tips.
watch the video...
plzz tell me what to do i am gett3the same problem
captain spark did you not watch the video?
Assalamualaikum, malam om Putra. Sukses selalu, saya pemula di drone dji spark. Ijin bertanya, kenapa drone dji spark saya untuk imu calibrasinya hanya ada 1 step dan langsung berhasil. Tidak ada 6 step, setelah di calibrasi. Malah timbul (Downward Infrared Sensor Error dan Error Code : 0x0002), mohon pencerahan apa yang harus saya lakukan?