Nicd to Lithium Battery Makita Cordless Drill 8.4V 2200mAh
ฝัง
- เผยแพร่เมื่อ 9 มี.ค. 2020
- How to upgrade 8.4V Makita Cordless Drill Battery from Nicd to Lithium Battery. The battery pack is 7.2V ~ 8.4V 2200 mAh.
Restoration Elements
- 2 18650 Lithium Battery 2200 mAh 3.7V
- 1 Li-ion Battery Charger 8.4V
- 2S20A BMS Battery Protective Board for Li-ion With Balance
- Nickel Strip
- PVC heat
- Backing Soda
- Soap powder
- kixx grease 2
- 1 power jack female 5.5 mm x 2.5 mm
Restoration Tools
- Battery Spot Welder
- Heat gun
- 12V Makita Cordless Drill
- Other tools
I hope you find something useful & enjoy this video!
I am happy to receive your feedback, advice, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
**I still keep some parts, I want to save the world's environment**
--------------Thank you so much for Likes & Comments--------------
This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries batery.repair and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!
Sick of seeing this bot comment 9n electrical engineering vids
Jorrjrkroe@@camerongover8459
@@camerongover8459 lokkkokkm!
!
? !? !?mko
@girish mehta I agree with your because work it . beside i recommended for everyone
@@michellegoodman5109 True
Upgraded from an older 18v kit. th-cam.com/users/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
Who has ever seen those high tech tools?
Who has ever had any luck soldering?
But the results were excellent,..........great video.
Glad you enjoyed it! thank you!
Yur actually saving the environment by restoring these drills. Keep up the good work
Exactly.
Здравствуйте
Здравствуйте
@@albinaxhami2693 э! 0жьщ8таиг2всм
2@@jefflim5443 2
Those tiny drills aren't very powerful, but it really is very compact. Nice restoration.
its from the early 70s so
Hay lắm. Lời chào từ Việt Nam. Hello from Việt Nam. Good job.
Great job! This old drill is about as compact as anything produced today, sleeker looking without all of the over-molding nonsense, and will last longer since it doesn’t have all of the modern electronics inside.
You forget about the fact that there are hardly 7,2 Volt (and slightly above) battery drills produced today. Almost everything is 12 Volt (if you still want to go down the NickelMetal-hydride way. which I would not recommend), 14,4, 18 and 24 Volt.
And there is a thing for weight-distribution as well. I don't like to work with these kind of drill as the weight-distribution just sucks. the battery-conversion makes things even worse in this case.
These small old Makita's are the perfect drill for dragging up a ladder to do gutter repairs etc.
I always dream for old accumulator drills and fixing it up to be my own drill.
I'm 13 and I'm into technology.
And these tools would be really helpful for me.
Let’s do it! I made my 30 years old Bosch 9.6 to lion sony cells and is still wonderful :)
What makes your videos so good is the excellent close up photography.
It is best in class.
bit of help for soldering: instead of putting solder on the iron and then transferring it to the solder pad, put the iron on the pad first and then add solder. It'll help the solder flow better, and may even let you not have to add flux to the pad before soldering.
I just got a Makita 6017D 7.2V drill with a really nice metal case, and DC7100 NiCd charger look like new but $3 at a yard sale I couldn't say no even if I'm all Milwaukee 😅 just too cool. Maybe I'll use the cells from a M18 5.0 to build this. How awesome.
Great idea, I got one of these, but with 9.6V
Did you use a 9.6 volt battery common for RC cars? I'm curious as to if the drill circuitry can handle the voltage increase and how well and long it performs. I have both a 1985 Makita 7.2 volt drill and a black and decker one with the rechargeable batteries that's built in pretty weak.
@@Nesmaniac My Makita is original with 9,6V
I added 1 more li-on cell and running the 9.6v drill on 12.6v. Talk about waking up the old drill. If it burns out you can buy another drill at the swap meet for $5! But 3 years and no problems.
Okay, thank you so much for sharing!
I have this exact drill and it’s my favorite. It quit charging and I ordered a new battery through Amazon. It still didn’t work. Found out my charger was bad. The drill works like a charm again!
x x Z at at xccC Z x x व x x व x x ज़ के x x x x x x x व उगादी ज़ के xx के लिए @ x @ ज़ x व x x ँँंZ at at 4th ज़ के लिए ज़ के लिए सभी 8.88.4............8.
De uy and
Ce
@@kishanvijay595 فعانخنه
فق
Great video! People need to know more about safety electronic circuits for batteries, and have some basic soldering skills as well... I see a ton of "restoration/repair" videos, cold joints and destroyed pcbs everywhere...
If i may suggest something, when using the desoldering pump, add some fresh solder to the joint you want to remove, it will make it a lot easier.
That's great, thank for sharing.
Very nice conversion, I had one of these back in the days. 👍👍👍
Наконец то правильное решение увидели, это я про литий. А в остальном видео как всегда безупречно.
One of the brass or bronze inserts (plain bearing) on the transmission shaft rotates with the shaft, which is bad. It needs to be checked and lubricated !!!
You put the BMS on the Batteries without any extra insulation. There is only Batteries shrink plastic cover between batteries and The BMS. It's possible to short out and causes fire when batteries get hot and the batteries plastic cover got melt. It can be very dangerous you are Pro and exactly know what I'm talking about.
You have done a good job. Your heating gun is phenomenal!
dgctu zzz t zzz t rit tu 5 5 7 t u tz tujh dh gvvpp
đfddsrgfgppppp
i HAVE ONE OF THESE i'VE OWNED SINCE i WAS A KID! i NEED TO CONVERT IT TO LION TO BRING SOME LIFE BACK INTO IT! aWESOME!!
Просто молодец!
Amazing video, please keep the cordless tools coming 👍👍
Um super like do professor Marinho do Ferramentas e Dicas do Brasil
You're very good and amazing job 👍👍👍👍
'
dont put too much thicky grease inside the drill case...
better little grease...
dont forget to clean the motor inside rotary with magnet
Yess ..,thanks👍🏾👍🏾👍🏾👍🏾🙏🏾🙏🏾💪🏻💪🏻💪🏻 from indonesia
You're welcome :D thank you!
@@gear_show 👍🏾👍🏾👍🏼💪🏻💪🏻💪🏻💪🏻💪🏻
Thanks for the video, i have quite a few tools that could use an upgrade. For a long time i refused to throw the old battery tools away. Now i can make them usefull again. Thanks, great videos
jjjjjghhgghhhhfhcw6jdhbb b. bbb bbb
Very good 😊 احسنت العمل اخي وصديقي الغالي
Great Job as usual. Treat yourself to a new 5" Vise. You deserve it.
Congratulations for your 5lack subs.
Master of conversion
Thank you :)
What a fancy grease jar!!!
Красавчик! Респект!!! 👍👍👍
Have so many old makita drills and stuff at home 👌I would give you if I could 👍
Du kannst es mir schicken :D
Very very good friend 👍👍👍🤝
'
i have one cordless drill with old NIMH batterys...
i removed old batterys and put new R/C model NIMH batterys in a drill...
great running well
I have a makita 6010SD with 7.2 volt built in battery from 1985. What sort of modifications did you do to make a 7.2 volt RC car battery work? Thanks a lot.
@@Nesmaniac
hi N...
'
makita old battery and brand new R/C battery are the same size...
easily replacement...
also mini vaccum by black-decker dustbuster battery was bad and i changed R/C battery in dustbuster... www.google.com/imgres?imgurl=https%3A%2F%2Fthfemu.s3.amazonaws.com%2FCollectionImages%2F_social%2Fphotos%2Fthf176444.jpg&imgrefurl=https%3A%2F%2Fwww.thehenryford.org%2Fcollections-and-research%2Fdigital-collections%2Fartifact%2F488124%2F&tbnid=u-ADnfC60lGblM&vet=12ahUKEwipxPPMoYvyAhU9BDQIHcrmCZgQMyhgegUIARC3Ag..i&docid=ZY_iBCFu6dNONM&w=795&h=512&q=dustbuster%20battery%20replacement&ved=2ahUKEwipxPPMoYvyAhU9BDQIHcrmCZgQMyhgegUIARC3Ag
@@bestamerica Thanks for the info. Seems the dustbuster calls for a 15.6V battery. The makita drill I have has built in battery so I was concerned with how the RC ones would fit be nice to find one that fit's properly then I could just arrange the plug to charge by cutting out a small portion of the case. Lots of 7.2 volt RC car batteries to choose from and I wonder how much time I can get out of a charge of one of those.
hi N...
'
better use R/C battery rechargeable...
my mini vaccum dustbuster is a only 3 batterys = 3.6 volts...
not 15.6 volts
You have a great workshop, lots of special tools. It is worth repairing such a good quality screwdriver, it is a very durable, valuable device, 10 times as durable as currently produced. Well done :-)
Well done. I really love Makita and Hitachi, because they're the best brands for cordless screwdrivers and they're easy to repair. Since I've been watching your videos, I started repairing machines, too, and I really love it ^^
"Makita and Hitachi are the best brands for cordless screwdriver"
You mean they were the best.
Actually Milwaukee has the best screwdriver.
hi T...
'
who is a word - THEY -
@@roterStern1917 false
You mean Metabo? Haha
@@BrentRoberts01
This is serious. They've tested all the brands and compared them against each other. Milwaukee was best.
Muito interessante 🤔
Bom trabalho amigo 👍
good idea with power adapter..... thanks
Restoration top 🤝👏
Well done bro 👍
حط
Sur
The point where the strip bends to the board needs more insulation or you are going to have a short as the battery moves and vibration it's going to eat away at that plastic insulation and cause a possible fire.
wa
👏👏👏👏Minas Gerais. bh. Brasil
Thanks!
Great job, very well done.
ຄ
ຝຝ
Золотые руки. Молодец!
You could have swapped the original makita cable with the cable of the new charger, so the joiner wasnt going to be needed. Still great job
Good to show this, because it's only been done a million times before on TH-cam. :-))
Question, how did removing a schottky diode and a single resister decrease the voltage?
The diode would have no effect on voltage and a single resistor could only minorly decrease voltage so removing it should've increased voltage 🤔🤔🤔
Could someone explain that to me please
Hermano, Saludos desde Venezuela!!!... Y Como siempre te comento en tus videos: Excelente Tu Trabajo... Te Felicito!!!
12:52 lets think... why put a grease to place where bearing and brass bushings fits.
For me is not necessary and maybe bad idea. What do You think?
Pedi todo para hacerlo tengo un makita igual desde el 1989 y al ver este video que contento en poder hacer lo mismo pero no habla ni explica seria genial pero agradecido y espero poder lograrlo
You do some pretty amazing work! I've found that the 3 ni-cad batteries(3.6V) is closer in size to the 21700 batteries. Almost identical. I've been upgrading my Black & Decker VersaPak batteries with them. Works great!
bonjours à vous
très beau travail de restauration
amitié cordialement
bernard et michèle
Bonjour,
Je vous remercie!
Would you mind adding in the description links to batteries, circuit, grease and all the stuff you're using?
Хорошо, что не показывает откуда аккумы берёт. Теплится Надежда, что не из убитых ноутов. Ещё поржал с того, как он посадочное под подшипник смазал)) а втулка на валу, если не ошибаюсь, смазкой густой мазать нельзя, только маслом. Засвистит скоро.
Fantástico meu irmão!
Congratulations, your videos are really cool. but where you find so many defective tools, it's all yours, all the ones you fixed, you keep.
Dobaripoučan
@@alijademiri9496 жх
Ujji
Quite high voltage of charging , 4.24v for cell is a bit to high, still in safe margin but bad for battery life span.
Okay, thank for sharing!
Limit charging to 4,15V for better battery life span
I have the same drill given to me by my Father, guess I will be doing the same. Thanks for posting.
1
i did the same with my old makitas, but also installed a low voltage beep. i might redo it and put a battery level LEDs.
a successful job
Felicidades yo tengo uno igualito pero me es muy difícil repararlo
Nice job. Congrats.
Thanks for the visit
I plan to convert my Makita too. I can only get a 2S13A BMS (instea of2S20A BMS). Will this do or is the 20A the minimum?
Better than new.
Enjoyed this video learned something which is always good 👍
God damned it! A mime video.
On numara olmuş bir dahaki sefere blendırı tamir etme viedosu çek
The best drill
odlican video.da ste blize da vam posaljem da i moju ovako prepravite
ขั้นเทพเลยครับ สุดยอดครับ ชอบมากครับ
ฉันดีใจที่คุณชอบ ขอบคุณมาก!
👍 Great job 👍
Good job.
Hito sang.
Thank you!
@@gear_show what is your last name?
Cool boss nice explain
I have a makita 6010SD with 7.2 volt built in battery from 1985. Would it be possible to make a 7.2 volt RC car battery work? Thanks a lot.
As long as same voltage you can change the battery with 18650 or RC battery
As long as same voltage you can change the battery with 18650 or RC battery
If the component pins of the bms heat up, it will puncture the plastic coating of the battery and cause a short
I would like to do this to a old craftsman 12.v drill.. it’s still in good condition never really had all that much use.. just the battery died.. just need to find a link to the parts needed.
Muy buena conversión compi. Lo único vigila que las celdas sea las adecuadas, ya que tienen que soportar un pico de amperaje de entrega de energia y no cualquier 18650 sirve. Por lo demás, un 10!!
Maybe it would be great if you sharpen your drill bits before the testing process!... 👍👍👍
Makita costly than other machines .but good.
I like it dude keep going
Thanks!
بسیار خوب .very good
11:42 зачем использовать соду? Есть отличное средство Profoam 1000.
I have redone this drill with liIon but the BMS only can be used for recharging not for power because the drill is only 2 speeds .......not varyable speed ..... the firs speed uses only one batt 4.2 volts and the second 8.4 volts so ..........
Exelente 👍
2:44: Which type of (melt) glue are you using?
The diode cannot cause an increase in the voltage of the Li-ion charger. The diode there served just to protect the cables from burning when the charging connector or charger was shorted.
no diode, that was a resistor!!
@@artashsargsyan4144 You don't understand the issue.
@@heno_3098 may be you dont understand the meaning of a diode!!)))
@@artashsargsyan4144 I understand it very well, but you don't understand what I wrote about. Watch the video 3 times and maybe you will understand easily.
@@heno_3098 anyway the world is round!! Jordano Bruno
good.vary good
Bravo!ottimo lavoro
interessante.
Amazing 🤩👍
Nice video
Nicely done
Incrível demais isso !
What camera do you use to record videos with?
from where have you bought the welder?
Where you gets the ckt board for cells.
The King