Hi... GRS CAD/CAE :) Thank You very much for step_by_step cut clear explanation. I have a follow Up Q :) you mentioned in your amazing video that while assigning contact properties, one has to model Stiff bodies as Target bodies and Less_Stiffer bodies as Contact Bodies. Q1) Is it a rule of thumb ? Q2) Why is this so ? It would be nice if you could enhance your tutorial videos by adding in few more words regarding why do we have to select particular options in a particular field... for example, Formulation = Augmanted lagrange, whats thew reason for choosing this and what happens if we choose something else ? Detuction Meathod, What is it ? for a student and for beginners all these information will help a lot while self studying/training :) Looking forward for more toturials from you :) Good Job. Thanks a lot again ;)
karthik b Karthik, Thank you so much for your suggestions, and I will try to embed the improvements which you suggested for, I will revert back to you on your queries/request very soon, have a happy week end.
For more Tutorial Videos Click on the link below ANSYS Workbench th-cam.com/play/PLOahOE6DpL4qq_QxPHieAeVejzDP1yIYW.html ANSYS Multiphysics th-cam.com/play/PLOahOE6DpL4qojPO7_GkgkVC-cB8KFMeC.html Hypermesh th-cam.com/play/PLOahOE6DpL4puVylWdpHWRoGhIfswDc6T.html Creo Simulate | Pro Mechanica | th-cam.com/play/PLOahOE6DpL4qvb2Z0Ir8SwvUyv0qnRGH4.html Creo Parametric Tutorial th-cam.com/play/PLC1voSxuLSym29Dt_xNnIJxBCtE-k9iul.html Pro E Wildfire Tutorial th-cam.com/play/PLLBsoJO8DYcVGLa_se2y5Ao0Vzwy6TUbz.html For online training on ANSYS Workbench | Creo Parametric & Simulate | Pro E Wildfire & Mechanica | HyperMesh | Contact: engineeringtutorsdesk@gmail.com
Good job sir. I have a question here. There is an unrealistic stress concentration on that vertex because of that extra constraint on that. Do you think it is necessary to put that constraint on the vertex? in reality we shouldn't have any stress concentration on that corner though!
Hello, there is something that I don't understand about your tutorial and I will be very greatful for your response: why do you change the pre-established units of the material data? Despite of the fact that I don't have the programming level of Ansys programmers, I understand a little bit about general programming language and in the softwares that I had developed in my carreer's courses I always took into account the fact of giving the user the possibility to introduce data in the units of their choice. The thing is, that in my programs, I always converted the data given by the user in the units of my personal choice, so it didn't matter if you liked to use the english measurement system or the metric one. Off course, my programs doesn't have the complex level of Ansys, but I think it is very possible that Ansys programmers should had taken it into consideration. Thank you for reading my comment and for your response. Have a nice day.
Hi, Very helpful video. I have a question regarding steady state heat transfer in ANSYS. If i have a plate with rectangular fins and my aim is to find the film coefficient of convection h in order to keep the plate at a fixed temperature, how can i do that on ANSYS? Because if i want to apply the boundary condition for convection, i cannot do it without h, which is what i want to find. Thanks!
Thanks a lot for this important tutorial...... My question is that...is it possible to know the maximum stress of fatigue analysis at a given number of cycles in ANSYS WB? as it is known we input the alternating stress vs the number of cycles in engineering data from experimental result and we can get the fatigue life of the material that can survive before failure, but how can i know a stress at a specific number of cycles...
The aim of my subject is the enhancement of the heat transfer inside a hot rotating tank which contains a hot rotating blade and a cold fluid. I am using Ansys Fluent but i couldn't find how can i give the initial temperature for the fluid?
I have modellled beam with reinforcement and when I look for the deformation then I get deformation contour only in reinforcement, and if I select the concrete section for the deformation then no deformation contour come and it shows transparent body So is there any way I can see the deformation in the concrete ??
before learning ansys learn the design softwares like catia , solid works etc to design the components .After learning them bring the design components to ansys to analyze the stresses induced in design components.
any design software is good to go ,if not u can also design thing in ansys classic but the thing is the interface is not user friendly.If u r an engineer u better use any designing software to design things **even pro e is good to go ** and then take the design to ansys to see the stress induced in the component.
Hello I am Alex from Mexico. I was following your tutorial but when I try to put the frictional contact with all the parameters you mention. This error message suddenly appears. "You have a contact tool with invalid contact selections or result requests" Any ideas to solve it. Thanks in advance!!
Hi, I'm trying to model bonded contacts in thin metal/polymer system with plasticity and creep. I've refined the mesh but still keep getting "high distortion of elements error". If you could please make such a video or help with some insights, that'd be of great help. Or if I can send you the file for you to look at, that'd be awesome. Thanks for your great videos!
Dear Sir, could we calculate when part 2 is rigid, if can, how can we apply force and boundary condition, hope to recieve your anwer, Thank you so much
+Reetik Tripathy Fix support will constrain the geometry from translation & rotation. Displacement constrain will give the freedom of allowing or restricting translation only. Remote displacement constrain will give freedom of allowing or restricting translation & rotation both.
Hello there! i dont have my "Engineering Data Sources" icon (the one next to physics filter icon) on the top of the toolbar or anywhere. Is there anyway i can make it visible? Thanks in advance!
Hi! I have a question. When you get the solution, there is a message that appears at the botton, it says "one or more bodies may be underconstrained and experiencing rigid body motion" What does that mean?? I´ve been trying to make a model with frictional contact, and always get that warning. I would really appreciate if you answer me.... Thanks. (Sorry for my english hehehe)
Greetings! ! Mariana I got you, this warning message is due to the insufficient constraints. The model will try to constrain in its position by weak springs if enough constraints are not specified. If you can sketch your problem description and send to engineeringtutorsdesk@gmail.com then I would be able to suggest the relevant boundary conditions to fix this warning message. Cheers....
Hi I am trying to simulate something like this in ANSYS APDL my approach is to heat one part (load step 1) and then allow it to cool down with the contact/target option (load step 2) . However only load step 2 is taken in to consideration. Any ideas why ? thanks
Naj Hos Thank you Naj, the thing which you are looking for is thermal simulation, and this tutorial is of structural simulation, please give me some time i will come-up with the solution video for your case
You are very nice when speak slowly and clearly, beacause people who are not good at english like me can still hear and understand
Thanks so much
absolutly select good video, it is my opion,thank you hindi man you are good person :)
Grt explanation sir....
Your voice is very balanced as loud and clear, thanks for the help.
Thank you very much, Your videos help me a lots in my works
Thank you sir. this video was very much informative.
Really a good job Sir.....
Thank you everybody for your valuable comments.
Very helpful thanks
very nice this tutorial video
Thank You sir , it's very helpful for me .
LIKE, its so good man
Where is the geometry file?
Hi... GRS CAD/CAE :)
Thank You very much for step_by_step cut clear explanation.
I have a follow Up Q :)
you mentioned in your amazing video that while assigning contact properties, one has to model Stiff bodies as Target bodies and Less_Stiffer bodies as Contact Bodies.
Q1) Is it a rule of thumb ?
Q2) Why is this so ?
It would be nice if you could enhance your tutorial videos by adding in few more words regarding why do we have to select particular options in a particular field...
for example,
Formulation = Augmanted lagrange, whats thew reason for choosing this and what happens if we choose something else ?
Detuction Meathod, What is it ?
for a student and for beginners all these information will help a lot while self studying/training :)
Looking forward for more toturials from you :)
Good Job. Thanks a lot again ;)
karthik b Karthik, Thank you so much for your suggestions, and I will try to embed the improvements which you suggested for, I will revert back to you on your queries/request very soon, have a happy week end.
For more Tutorial Videos Click on the link below
ANSYS Workbench
th-cam.com/play/PLOahOE6DpL4qq_QxPHieAeVejzDP1yIYW.html
ANSYS Multiphysics
th-cam.com/play/PLOahOE6DpL4qojPO7_GkgkVC-cB8KFMeC.html
Hypermesh
th-cam.com/play/PLOahOE6DpL4puVylWdpHWRoGhIfswDc6T.html
Creo Simulate | Pro Mechanica |
th-cam.com/play/PLOahOE6DpL4qvb2Z0Ir8SwvUyv0qnRGH4.html
Creo Parametric Tutorial
th-cam.com/play/PLC1voSxuLSym29Dt_xNnIJxBCtE-k9iul.html
Pro E Wildfire Tutorial
th-cam.com/play/PLLBsoJO8DYcVGLa_se2y5Ao0Vzwy6TUbz.html
For online training on ANSYS Workbench | Creo Parametric & Simulate | Pro E Wildfire & Mechanica | HyperMesh |
Contact: engineeringtutorsdesk@gmail.com
Good job sir. I have a question here. There is an unrealistic stress concentration on that vertex because of that extra constraint on that. Do you think it is necessary to put that constraint on the vertex? in reality we shouldn't have any stress concentration on that corner though!
thank you thank you thank you
thank you for this nice tuotial
You are welcome, Hazem. for communication you can reach me at engineeringtutorsdesk@gmail.com
which version of ansys is this?
Where can I get the stepfiles sir?
can we make the geometry using ansys itself or cad is more better to use??
How I can get options of outline of engineering data and their properties??
So, should I draw the two objects separately on two files or draw them together in one file but with space between them?
very good video.
question: can the viewpoints be synced? by rotating a view window, all will rotate together.
Thanks in advance.
Hi thanks for sharing. Do you have tutorial for creating a rectangular loop antenna?
Hello, there is something that I don't understand about your tutorial and I will be very greatful for your response: why do you change the pre-established units of the material data? Despite of the fact that I don't have the programming level of Ansys programmers, I understand a little bit about general programming language and in the softwares that I had developed in my carreer's courses I always took into account the fact of giving the user the possibility to introduce data in the units of their choice. The thing is, that in my programs, I always converted the data given by the user in the units of my personal choice, so it didn't matter if you liked to use the english measurement system or the metric one. Off course, my programs doesn't have the complex level of Ansys, but I think it is very possible that Ansys programmers should had taken it into consideration. Thank you for reading my comment and for your response. Have a nice day.
Hi,
Very helpful video. I have a question regarding steady state heat transfer in ANSYS.
If i have a plate with rectangular fins and my aim is to find the film coefficient of convection h in order to keep the plate at a fixed temperature, how can i do that on ANSYS? Because if i want to apply the boundary condition for convection, i cannot do it without h, which is what i want to find. Thanks!
Can you do any analysis on fluid flow and heat transfer?
which ansys software you are using?
ANSYS | CFD CFX: th-cam.com/play/PLOahOE6DpL4r7uMQl8n0VcEqoF7Vay7jg.html
Thanks a lot for this important tutorial...... My question is that...is it possible to know the maximum stress of fatigue analysis at a given number of cycles in ANSYS WB? as it is known we input the alternating stress vs the number of cycles in engineering data from experimental result and we can get the fatigue life of the material that can survive before failure, but how can i know a stress at a specific number of cycles...
does this tutorial includes surface and shell meshing too in the following videos?
+Nishanth M yes
How to add contact surface if it is not default
Hi , I am new on Ansys and I have good knowledge of Solidworks .
Is this much enough for meeting the prerequesties of this software ???
+koushal vaishnav Yes
could you make the video for deep drawing process sir? thank you
How to create .cdb file from ansys workbench?
Liked !
+tushar Kulkarni Tushar you may also like www.TH-cam.com/c/grscadcae
sir 35 video are enough for mechanical engineer or not sir
The aim of my subject is the enhancement of the heat transfer inside a hot rotating tank which contains a hot rotating blade and a cold fluid. I am using Ansys Fluent but i couldn't find how can i give the initial temperature for the fluid?
I have modellled beam with reinforcement and when I look for the deformation then I get deformation contour only in reinforcement, and if I select the concrete section for the deformation then no deformation contour come and it shows transparent body
So is there any way I can see the deformation in the concrete ??
how to install the softwares?
hi ,,,,,,,, what should i learnt before ansys then i start ansys..... i means which software i learnt then start ansys
before learning ansys learn the design softwares like catia , solid works etc to design the components .After learning them bring the design components to ansys to analyze the stresses induced in design components.
Saichaitanya Bondada i had also used pro e is it right software or not
any design software is good to go ,if not u can also design thing in ansys classic but the thing is the interface is not user friendly.If u r an engineer u better use any designing software to design things **even pro e is good to go ** and then take the design to ansys to see the stress induced in the component.
if u r good with designing u can start learning ansys.
ok thnks
Hello I am Alex from Mexico. I was following your tutorial but when I try to put the frictional contact with all the parameters you mention. This error message suddenly appears. "You have a contact tool with invalid contact selections or result requests" Any ideas to solve it. Thanks in advance!!
Hi, I'm trying to model bonded contacts in thin metal/polymer system with plasticity and creep. I've refined the mesh but still keep getting "high distortion of elements error". If you could please make such a video or help with some insights, that'd be of great help. Or if I can send you the file for you to look at, that'd be awesome. Thanks for your great videos!
Dear Sir, could we calculate when part 2 is rigid, if can, how can we apply force and boundary condition, hope to recieve your anwer, Thank you so much
From where can i get the step file
Giving a fixed support on a face and making the displacement of a face zero, are they same???
+Reetik Tripathy Fix support will constrain the geometry from translation & rotation. Displacement constrain will give the freedom of allowing or restricting translation only. Remote displacement constrain will give freedom of allowing or restricting translation & rotation both.
How can I get the CAD model
sir i want to join two plates with the help of explosive welding is there any kind of demo
plzz send the link
+suraj srivastav hey Suraj that you can do with friction Stirr welding
+suraj srivastav you can use FSW
hi how are you
please i want to ask you how i create in ansys a diffuseur geometry
Use design modeler
HADJER KADIR hi hadjer . I find u very beautiful
Sir could you please explain how to get natural frequency for spring in workbench
Hi, can you help me to find deflection of non linear barrel shaped Helical spring
How to buy your ANSYS files? I contacted you but no response.
Hello there! i dont have my "Engineering Data Sources" icon (the one next to physics filter icon) on the top of the toolbar or anywhere. Is there anyway i can make it visible? Thanks in advance!
Where can we get your CAD/STEP files?
Thanks
+Richard Hilson Please write me on engineeringtutorsdesk@gmail.com
Can you send me CAD / STEP files? Thanks
@@ANSYS-India can u send me also I also texted in mail.
Could you share CAD ?
I have installed ansys 17.0 I don't know how to start there are many software installed under ansys which one should i open?
Are you working in workbench?
+Nikhil Agrawal Start>ANSYS>Workbench17
What about windows firewall??
While trying this tutorial a window comes Windows firewall has block this soft should i allow it or block?
Hi! I have a question. When you get the solution, there is a message that appears at the botton, it says "one or more bodies may be underconstrained and experiencing rigid body motion" What does that mean?? I´ve been trying to make a model with frictional contact, and always get that warning. I would really appreciate if you answer me.... Thanks. (Sorry for my english hehehe)
Greetings! !
Mariana I got you, this warning message is due to the insufficient constraints. The model will try to constrain in its position by weak springs if enough constraints are not specified. If you can sketch your problem description and send to engineeringtutorsdesk@gmail.com then I would be able to suggest the relevant boundary conditions to fix this warning message. Cheers....
Hi
I am trying to simulate something like this in ANSYS APDL
my approach is to heat one part (load step 1) and then allow it to cool down with the contact/target option (load step 2) .
However only load step 2 is taken in to consideration.
Any ideas why ? thanks
Naj Hos Thank you Naj, the thing which you are looking for is thermal simulation, and this tutorial is of structural simulation, please give me some time i will come-up with the solution video for your case
Thank you Sir, much appreciated. I`ll wait for the video
GRS CAD/CAE I forgot to tell you that I am doing this on ANSYS classic
hello iam getting an error while solving like "a unknown error occured" please help me ith this.
Can you please share the file
Hi, Can I get the cad files for this examples.
Thnakyou for this video.
For CAD files write request to engineeringtutorsdesk@gmail.com
Thankyou.
@@anishros Can you send me CAD / STEP files?
@@anishros CAn you send me the files?
@@muratsevercan7034 do you have files?
When you aply the force of 56 N, this force is divided in 2 forces of 28 N per face or aply 56N per face?
Its divided
+GRS CAD/CAE itd divided but it depends of the area dimensión right?
Divided load will further divided and applied on each node.
I need those files pls
sir ,send me the pdf of CAD file of the bodies what u r using in ur tutorial of ansys
maybe somebody can help me with my problem: make acceleration in ANSYS workbench??
God!Indian English!
14 times add in 13-minute video, now i am tired
Thank you everybody for your valuable comments.
Where can I get the geometry file?