Extended Access List (ACL) for the Cisco CCNA - Part 1
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- A beginner's tutorial on writing an extended access list (extended ACL) for the Cisco CCNA and CCNA Security. The demonstration uses the Cisco Packet Tracer software.
In part 1, I demonstrate how to write an extended access list and where to apply or place it in the network.
For more information visit me at danscourses.com
These videos are 7 years old and by far has the best explanations on ACL.
Absolutely
totally agree.
true
Dan is the best instructor!
brio its 2022 and its still the best
This guy's explanation skills are superb. 7 years down the line, and your videos are still so useful.
Nice explanation on ACLs. Actually, all your videos are very helpful. A comment after 9 years. 😎
Thank you Dan for donating your time to make these videos! You are an excellent instructor.
Now was already 2021, watching all of your videos was very informative, the way you speak and explain on the details are absolutely crystal clear!!
please make some more videos sir! God Bless!
great, finally understand ACL inbound and outbound rules. thank you. In Monday 15. April i have CCNA certification exam, I hope I will pass.
did you pass?
@@eugenberzani1216 imagine how many things happened in his life, it's been 6 years since he commented this lol
@@TheNaddane But did he pass?
@@TheNaddane 8 years and still curious
@@orfr50 I'm curious too, after 9 years
Thanks Dan, you're the best CCNA instructor out there.
VERY CLEAR i succed my exam because of this
Thanks a lot about the last part of standard ACL
Hey thanks ! amazing video it really helped me understand because you went through the steps while you explained them. On another note I wish my instructor would teach the same way you did
thanks a lot, now I can understand how standard and extended works!!!
Good stuff! Sure eliminates some of the confusions found in the book!
thank you buddy, you teach it the best way, thumbs up
Thanks, awesome break down of the concept and application.
Clearly articulated and good presentation, +1 and subbed.
Great presenting way to explain..I loved it
thank the LORD for your videos!!!!
thank you content creator, for making this video that actually saved my life and allowed me to carry on with my education. is that better? at least my initial comment was positive Josef.
the lord??? thank dan xD
thank you so much, I finally understand this.
Thanks you made it really clear! Also watched your videos on static NAT and NAT overload, made it much easier to understand! Subscribed ;-)
Very Good explaining, Thanks .
Very good explanation ..Thanks a lot
Great video. Thank you very much
I tried this approach to stop Network A talking to network B, but to allow network B to still talk to Network A. Pings from A to B are blocked as they should be. But pings from B to A just time out. Any ideas what has gone wrong?
Meneer je hebt mij geholpen dankjewelles :D
amazing lesson thanks
God bless you man thanks a lot for your videos they are a great source of learning if you have any ccna 200-301 course I will buy it
its very good ...thnk u Dan.
Great video thanks well.
you explained it as ez dizzzyyy
excellent, thank you!
hi i thank you a lot for what you are doing to hep us because i become familiar with acl standard but i have problem with acl extended video only the sound is coming so please more video about acl extended.
hello Dan, thx for the clear explanation, but i'm having a hard time with the palette option and i am unable to create beautiful and colorful circles.
By any chance can you just make a 30 sec video and show it's done...just asking. thank you.
God bless you!
Please make a video on ACL vs Firewall....
fantastic, go on
thanks
How can u connect two network for the same port? In my case i have 2 network one with Lan A the other is lan B and have the same ext acl for the denied port Like 80 and 443 i have assumed the network is blocked for this port to connect because it have the same acl rules? Need your help thanks!
Dan could you make some tutorials on class-maps,policy-maps and acls? also ASA tutorials, ive been trying to set one up but there doesnt seem to be a good ASA simulation package. it would be perfect if they included an ASA in packet tracer.
so when I use standard ACLS it's going to be always outbound and with extended ACLS is going to be inbound, just for the rules of closes to source and closest to destination? thanks great vid btw
this is not understood - when do i need the wildcard when do i need the subnet? and also the CLI gives me other things than shown here.
saviour!
Thanks!)
hello dan, greeting from Iraq, I understand why we can't use Standard ACL close to the source, But why we can't use Extended ACL anywhere? since it uses source and destination?
Thanks, Regards.
Hello, You would be able to put the extended access list anywhere in the network between the points you want to block, but if you put it closest to the source you are going to save bandwidth from stopping that packet from routing a lot sooner. Hope this answers your question, have a great day!
Could you make one on applying ACL to VLANs?
I guess you can just go to int vlan and then ip access-group 100 out
there isn't any download link for this packet tracer?
Configuration Register Settings: do i need to know them for the CCNA?
Hi Dan, where can i download a pre configured ACL extended. Thanks
thaq sir
i don't know clearly about inbound and outbound, please explain for me, thanks
you can use inbound or outbound.its up to you.for example whrere do you want assign your security guard on your house, inside door or outside door.thats it.
Im confused about getting the wildcard bits, any help? Thanks!
To get the wildcard bits you invert the subnet mask so 255.255.255.0 becomes 0.0.0.255
After configuring access-list 100 for denying IP from host 192.168.2.100 to 192.168.1.0 network,then I added another access-list to deny IP from host 192.168.2.101 to host 192.168.4.100 by typing this command "access-list 100 deny ip host 192.168.2.101 host 192.168.4.100 ",but its not working.Can you help me out,why this is not working.
+Prasenjit Pal R1(config)#access-list 100 deny ip 192.168.2.101 0.0.0.0 192.168.4.0 0.0.0.255
And also apply this extended access-list on R1(config)int fa0/1
R1(config-if)ip access-group 100 in
Apply this,Defnitely it will work.If u have still problem,Share ur .pkt file to my mail ID (natarajan28311782@gmail.com)
Thanks
After completing ACL, can we ping from 192.168.1.100 to 192.168.2.100 ?
of course I tried myself
gj dude
can you share the file please ,thank you.
2/15/2022
cisco packet tracer 5.3 for windows and linux
Videos are great, but the recaps on each video are quite annoying when you watch them in a row.
Poor little baby. Make your own videos.
@g00glian0 her comment makes sense, your not. Whats wrong in giving advice?
Poor little girl, go home and cook.
Delicious
ABRUPT ENDING!! DISLIKE!!!! DISLIKE!!!! DISLIKE!!!! hehe great video man as usual. Keep up the good (Samaritan) work.
This :
Me : cant type in cli
ayyaa meru devudayya... _/\_
Very helpful, thank you!