Hey Vince! I love your channel because of episodes like this. I think you should do your own version of the old, "The more you know!" thing at the end of these types of videos.
I believe the questions asked once before on a life stream what that was for and I mentioned it was a 1/4 - 20 threaded insert for a magnet accessory that was originally offered for an m12 work light, but that they also offered a hook
80% of this channel could be 1 minute videos however even if you wanted too you cannot do that on youtube. The algorithms that decide what content to promote on youtube will almost never recommend a video thats less than 5 minutes. Just gotta skip.
the hardest thing about those bits is taking them out of the damn box. I always feel like my finger is going to slip and get cut on an adjacent bit. I use needle nose to get them out - it's ridiculous.
agreed to both of you guys. I have the one set with drill bits, and almost diced my fingers trying to get the out. Pliers or something to wedge them from underneath is the way to go.
Lmao said something damn sometimes I just want them to say what video is I don’t need the “jokes” and pointless skits just show me some thing damn it not everyone got mins to waste lol
I've said that before, but he doesn't listen. Now I just skip through the beginning, because I know he's going to rattle-off for a good three to five minutes.
Guys. Y'all do realize that these guys are in business of gathering the largest crowd and getting the most views possible on here right? If you don't have the time to waste. Then get off of fkn youtube. It's called personality and a sense of humor. Get one
They planned on attaching them to the pack out boxes, it went all the way to production on the bit boxes, but VP veto'ed it because they make the pack out organizer box, so it would have took from profits on the new pack out organizer. My uncle works for Milwaukee
Yes! This vid was 5-6 minutes too long. I was reading the Comments on this vid while I was watching it. About the 5 minute mark I realized I had been bamboozled! And so had everyone else. You want to make this a 7 minute vid (and be fair to your audience) you should have had a smoking hot blond in a bikini demo’ing the things you tried fitting to the Milwaukee box.
If they want to go fancy with these boxes, they should design them, so you can remove the bits with on hand. Some times I even need pliers to remove them, especially with oily hands
Dude seems to operate in overdrive when he’s motivated and has a goal. Probably surprisingly quicker than most people out there. Not to mention he’s likely the owner of the construction company and not the one swinging a hammer anymore. Can you imagine working for someone who operates at 2x speed?
I store my drill bits with the cutting edges in, not out. First, you never worry about cutting your fingers when putting them in or taking them out. Second, it is easier to see and compare rod sizes than imagining the rod size when looking at the sharp end. It is easier to hold a bolt up to the flat back and see if the bit is a good size. I like the carriage bolt honorable mention idea. The magnet would quickly attract sharp iron filing that would have to be removed or risk injuring skin. The other ideas are good but esoteric for my own use.
Dude drug this video out 7 minutes too long. If I had to listen to that voice on a daily basis I would drill out my eardrums. Hang on I’ll make a 7 minute video on it.
His schtick. He has good videos though this one was entirely too long, but that's why they give us those 2 triangles that point to the right. (Fast fwd).
Well, time to buy a bag of 1/4-20's, a few magnets, and some epoxy. Thank you for revealing the answer to "What the hell is this for?" My guess for why they dropped the belt clip is that someone went up a ladder and the bit box came down way before they did.
I’ll stop at this channel once in awhile. Still too many Theatrics. This should be a one minute video. I appreciate the channels where they get right into it without trying to be a comedian.
@@maxwaters1461he'd be a terrific political candidate; to expound virtues of 1/4"-20 female threads in a mere 7+ minutes. And who watching this couldn't MAKE a belt clip or loop to hang from belt, ladder rung, maybe ear gauge? At least they have a clue what size screw to allow for!
I've got 2 sets, and I put a small carabiner clip attached to short nylon webbing on each. Then I just clip them to the D rings for the shoulder strap of my main tool bag. Keeps them hanging conveniently on the side and frees up a lot of real estate inside.
Sorry VCG I am a fan of your videos but this time I have to call BS! Everyone knows 1/4x20 is the correct size and pitch for the uranium powered flux capacitor. Secretly used by your shadow organization to retrieve that sweet 80's techno sound byte for your intro.
Probably their tests for the belt clip was turning up multiple failures one and the most major of which I can only assume was that the nut in the case would eventually after X amount of times tear out or the latter of my two ideas was the case would open/it'd get snagged.
I'm wondering if the belt clip is no longer available because it wasn't a tight fit on your belt and they slipped off and fell. Hitting a co-worker with a falling object is a safety issue and they probably got tired of replacing the cases after breaking from the fall. 🤷🏻♂️
Hi Vince, you recently reviewed Milwaukee’s little red shockwave toolboxes. Any idea why the bits are so hard to get out? I’m not fond of having my fingers slipping on a drillbit trying to pull it up and out of a too tight holder, and slicing my finger open. DeWalt has a much better style. Flip up 90° and pull the tool out with no effort. I’ve resorted to putting a small stubby screwdriver in the box, and prying up from the bottom on the bit shank until it breaks free. Much savings on Band-Aids!!!!
The main reason they have the super duper secret 1/4 20 nut is because guys have waisted miles of good 3m electrical tape, hiding the helpers tools in the ceiling... So Milwaukee said *Voila* ... screw the box right to some all thread! The kid freaks out, everyone laughs and the boss is very happy because only time was wasted... no tape!
For any photographers, we have Peak Design Capture Clips that can be bolted to the Milwaukee tool boxes. Then you can attach the boxes to ANY belt quickly and easily. We also have 1/4”20 neodymium magnet mounts that can hold about 10 lbs.
Holy CRAP!!!! this damn video could've been (SHOULD'VE been) about 53 seconds long, but he dragged and fumbling his way to 7 f'ing minutes.....my lord that was painful.
My guess is to hang them on a wall in your garage or shop, peg board or a sheet of wood, whatever you can think up, everyone’s got different and good ideas 👍🏻
i think some of the cases weigh to little to be used with a belt clip, i used it on a ladder and it popped off, opened up as it hit the ground and just scattered all the bits, never ever saw 30% of those bits again
I think the reason Milwaukee doesn't sell the belt clip anymore is because the nut will pull out of the case. If you look at the case, it shows the nut was pressed in from the outside instead of the inside. So when walking around with the clip on, the case would fall off & spill everything.
Oddly as a mechanic...that magnet on the bit case...helps keep the case stay put under the hood of a car while your working on it. I've known about it for years actually!
I've never ever ever in all my years of working with tools seen a guy walking around with his bit box on his belt... the reason they don't sell the clip is because they know its a dum idea but they put it on because "the more features the better"!! Also i do believe the bit holders rotate so...um...why the stand idea in the back? The video is meh but in the end its just a bit box fantasy and probably slightly more expensive bit box that you can get for a cheaper price from dewalt or ryobi for the same quality.
DeWalt? Cheaper? Yeah, because that's what their junk is known for LOL Ryobi??? Why are they even being mentioned in the same conversation? My kid is 7 with his own tool box, and even he knows better than to use Ryobi. HAHAHAHAHAHAHAHAHA DeWalt and Ryobi he says, damn youngins....
@@carlspackler91 Carl Spackler Carl Spackler Carl Spackler Mr. Spackler i respect your opinion very much but i do believe a lesson is in order. The dewalt bit and the ryobi bit are likely manufactured in the same factory and branded in the same factory then shipped to dewalt and ryobi for packaging. As for the molded piece of plastic called the bit box or (whatever you call your bit box). I don't give a flying lump of **** what its features are do they hold the bits yes! Does a ryobi bit box hold my bits? Yes, does my dewalt bit box hold my bits? Yes, there the same. Also your kid has a tools at age 7 wow you must be rich and not making sure your kids not looking at tool porn at night because thats bad at his age you know! I got my first tool at age 10 and it was a handy down form my dad as a reward for helping him build the deck that still stands there to this day (20 nearly years later) (the tool was a square). Now the reason i mentioned dewalt and ryobi was because it applies to two types of people the "homeowner" who couldn't give a dam about it as long as it gets the job done and then you have contractor/real man (maybe) buy the most expensive brand of tools because there the best!! Ryobi being a "homeowners" brand just need it to work so yes it will be of a lower quality and this lower price. Dewalt on the other hand (mostly) is ment for the workplace so its more powerful, built better, and will last longer thus being more expensive and better held in regard. And ryobi is not the shity brand of handheld battery powered tools that title goes to mastercraft in my books. I have my intelligent reasons for saying the things i say and would rather not be insulted by being called a "damn youngins" when it is very obvious that you good man still have much to learn. Respectively Mr. Pearson Cheers from Canada.
@@feltonfolder420 Well YOU, my good man, need to take it easy and learn to recognize satire when you see it. Rich? Hardly. I work for my money. My kid has hand me down tools as well, that's why there's basically Klein, Estwing and Milwaukee in his stash because he gets MY hand me downs. I switched from DeWalt to Milwaukee 8 years ago and haven't regretted my decision once. I was sick and tired of always having to charge my batteries on the jobsite. Ironically, I just finished some work, begrudgingly with a DeWalt angle grinder because it's what they bought for the shop. Even with 2 like new 20v lithium ion batteries fully charged when I started, 4 short cuts into some aluminum/ mild steel proved to be too much for the mighty DeWalt grinder. They never fail to prove my point. DeWalt should be your first choice, if you don't like your money and you like stopping in the middle of a job to look for more suitable tools. I do agree with your point, that for someone who is an interior decorator hanging some fabulous pieces of art inside a home with 1/2" sheetrock and they don't want to risk injuring their weak little wrist, Ryobi is the perfect choice. Take it easy over there, you'll live longer. You old fart. HAHAHAHAHAHAHAHAHA
@@carlspackler91 Carl Spackler Mr. Spackler you bring up good points, but im confused as to why your shop bought a battery powered angel grinder?? Unless your doing very light work (wire brush/light grinding kinda work) thats poor knowledge of tool use i feel bad for that angle grinder you should always be using a corded tool when cutting metal. I think you need to have a word with your quartermaster about the proper tools.
@@feltonfolder420 You're right, but I've found that discussion to be futile at best on many occasions. Hence the reason I brought the corded Milwaukee out of my own stash in my truck.
How much of a madman do you have to be to attach a gorilla tripod to your bit case instead of just taking out the bit you need and leaving the case in your bag or on the ground
I haven't watched yet, but fixing to. I'm guessing you're going to talk about the 1/4 -20 threaded insert on the back that is meant for magnets and hooks
Been watching for awhile. Subscribed. Nice to know about that Makita case hidden storage. Def never knew that. I'm an electrician almost 30 years now. Point Pleasant NJ over here,
VCG Construction I think retrofitting a screw/nut and bracket like an old phone belt clip so I can pop off when needed. somehow make a row of clip on/off storage. Makes sense in my head but could be an idea. Lol 🤔😂
My case came with 3 belt clips along with my m18 drill and 1/4 drive impact and I made my own magnet for it and made a carabiner clip and strap . The clip you had didn’t look like mine , mine looks like the one on you impact on the shelf behind you . My favorite one is the strap w/ carabiner it’ll hook onto anything !
i use the M12 stick light on a daily basis at work...i never bought the magnet cuz the price kept going up everytime i wanted to buy it...at one time it was $30 but now HD sells it for $22...not worth it for a magnet in my opinion
kingofthecrease30 I originally got the magnet with the m12 light... lost the light but not the magnet! Now the magnet rides with one of those red boxes. It is practical when working on tightly spaced equipment where a tool belt is too much or a at height. I just fill up the red box with bits, pencils, markers or whatever and hang it. Kind of like the Fluke meter magnet to use in panels or to hang multiheads. But at $22 it's too expensive. If it were $5 it would be very worth while.
I did build a unistrut bracket with 1/4 rod and stand off claps worked pretty good but found out it’s better to have them with me where the works at,so most of my kits made it back into my packout.great vid Vince love the intro music!!!
Could have said everything important in one minute. "Is this real stainless steel?" Hint #1: Since it's a shelf it's probably chrome plated steel. Hint #2: Even if it is stainless steel, it could be magnetic. Not all stainless is non-magnetic.
You can probably take the belt clip off of your M18 Impact and put it on the box. I take them off the tools anyways maybe they intended them to be used with the boxes
The kickstand idea is pretty cool!! I think they got rid of the beltclip idea because where are you supposed to fit it with a toolbelt on. That's my guess, but what do i know. Always hitting us with the great tips brother!! Nice vid! VCG4LIFE!!!!!
@@VCGConstruction Vince I have to agree...gadgets can be addictive...I know...I bought the Packout...and next thing...I have the three regular boxes...bought another two tool boxes...and then 4 different slim and half Packouts...now I have to get the magnet...!
28 bucks for a magnet with a bolt I can get like 10 earth magnets epoxy them bitches to any tool box not just Milwaukee and still have the same useless effect for less
VCG Construction I just meant show if you loaded any up with other tools. I have customized some of mine with other gear, for instance I have added 1/2”, 3/8” and 1/4” hex drive adapters to one case so I have it to use to drive any size socket with the impact when I work on the car of other equipment.
Sorry Vince, It was actually completely designed for me. It's actual intended use is to be screwed onto the work area in a secured fashion so that when I can't get the bit out of the case when I need it, I can't throw it at the wall or window, thus creating more work for the tapers or glazers. There, now you're in the know!
Nice video Vince. I didn't really pay much attention to the drill and bit cases. I have four milwaukee cases. The drills which fit into an impact driver I have trouble pulling out. They are in so tight I need something like a precision flat edge screw driver to edge them out to avoid cutting my fingers in the case I'm not wearing gloves. I recently bought the cobalt drill bits. I also have masonry. Milwaukee make some very fine drill bits and their quality is good.
Working with the Milwaukee shockwave boxes, I’ve noticed that it can take both hands to get a bit out, that’s why I don’t think Milwaukee offers a belt clip with them. Imagine pulling a bit up one handed and your whole bit box just flew up and out..
I made my own screw-on magnet before those were available. Bought rare earth magnets at the local surplus store, with holes already in them. I also have one of the smaller boxes with a belt clip, which came from the surplus store as well. Been using these for quite sometime now. I think the kickstand idea is brilliant! Cheers, keep up the great videos.
@vcg_construction Heard you can buy M12 belt clip to use with it if you want check. eBay they have em with the screw. I. Think it's. The same size I just wanted to pass that information along and might be an idea for people that can't find the Belt clip that originally was supposed to go with it the Milwaukee M12 belt clip looks a lot more low profile I do like the magnet idea reminds me of the DeWalt magnetic cases I'm just passing this information along cuz you're maybe people that don't want to put the magnet and just want a belt clip you have the M12 baby the belt clip fits you could try it I'm just after examining them thinking that might work add a second idea instead of the magnet people want to put it on their tool belt #justsaying
Either I got ripped off by the Home Depot or these were recently discontinued. I bought my shockwave set back in 8/2020. It did not come with the hole. Not a big deal at all but I'm just curious.
About the belt clip, it's a hazard to have any thing on your belt. Perhaps this is why they don't advertise it this way. (Personally I use a tool belt and are aware of the dangers, but looking around for the tools you need all the time "ain't no body got time for that ") An acquaintance of mine fell off a ladder and shattered his hip because there was a hammer in his holster, and it happened to be right where he landed. Maybe this is milwaukee trying to ward off a lawsuit and evil spirits? Cheers
I thought they were going to offer a camera option for the boxes and you could use the integral 1/4-20 nut for attaching to a tripod. But he didn't mention that. I guess no honorable mention for me. Two bad. I would have liked one. As an aside it can be a bitch to get the drill bits in and out of those boxes.
Its for belt clips and magnet attachments Milwaukee used to sell. its 1/4 by 20 thread fri, throw a bolt in it of you want. Saved you 6 and a half minutes.
this gave me a better idea. instead of the magnet, just bend a bolt to make a hook and screw into the side. beats knocking the box off your scaffold/ladder and you can hook to anything, not just ferrous. belt, wood, saw horse etc.
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
Hey Vince! I love your channel because of episodes like this. I think you should do your own version of the old, "The more you know!" thing at the end of these types of videos.
We can add that!!
I believe the questions asked once before on a life stream what that was for and I mentioned it was a 1/4 - 20 threaded insert for a magnet accessory that was originally offered for an m12 work light, but that they also offered a hook
I believe you are correct fine sir!
Thanks again for the info always good to informed on things like this
VCG Construction 90
This should have been a 1 minute video
80% of this channel could be 1 minute videos however even if you wanted too you cannot do that on youtube. The algorithms that decide what content to promote on youtube will almost never recommend a video thats less than 5 minutes. Just gotta skip.
But then he wouldn't have had the pleasure to hear himself talk for 7+ minutes ...
No
Your mom is a 1 minute video
Exactly what I was thinking
the hardest thing about those bits is taking them out of the damn box. I always feel like my finger is going to slip and get cut on an adjacent bit. I use needle nose to get them out - it's ridiculous.
agreed to both of you guys. I have the one set with drill bits, and almost diced my fingers trying to get the out. Pliers or something to wedge them from underneath is the way to go.
So true
Lucky I'm an electrician and always have pliers handy just to pull them out
that is the truth 😂😂😂....
lifeisgood070 idk what it’s like for all the kits but some of the bit holders flip up
Dude I like the meat of your vids but the intros are too long. Get to the point. Keep up the good info
Lmao said something damn sometimes I just want them to say what video is I don’t need the “jokes” and pointless skits just show me some thing damn it not everyone got mins to waste lol
I've said that before, but he doesn't listen. Now I just skip through the beginning, because I know he's going to rattle-off for a good three to five minutes.
Guys. Y'all do realize that these guys are in business of gathering the largest crowd and getting the most views possible on here right? If you don't have the time to waste. Then get off of fkn youtube. It's called personality and a sense of humor. Get one
Wait what ...You like his meat ? 🤔
Exactly, he can easily cut 80% of the BS out and be more productive.
They planned on attaching them to the pack out boxes, it went all the way to production on the bit boxes, but VP veto'ed it because they make the pack out organizer box, so it would have took from profits on the new pack out organizer. My uncle works for Milwaukee
Surprised this didn't get more likes. Good info lol
Ah the old “my uncle works for” line of bullshit.
@@autonomous44 you know real people work there right? Those people have family one can assume and even friends. No need to be a D Bag your whole life
@@travis8623 You new to the internet or something? The "my uncle works there" shit is an age old classic. Don't jerk my jive, son.
@@autonomous44 yawn
Sometimes Milwaukee thinks a little too hard... it’s a bit case
I can see what you're saying!!
I need a drink after watching this
Where you been Big_A? We put your face on a milk carton last week!!
@@VCGConstruction by the time i have been getting home the live streams have been done. But i will be back representing the 609 ... lol
Yooo cuz we need the representation!! Good to hear from you! Glad you’re busy and doing well!
There was just no reason for this to be a 7 minute video
Could have done this in 30 seconds or less.
Couldn’t agree more man
Come on, it is SHOW..
Don’t like it, don’t watch it!!
Simple as that..
Yes! This vid was 5-6 minutes too long. I was reading the Comments on this vid while I was watching it. About the 5 minute mark I realized I had been bamboozled! And so had everyone else. You want to make this a 7 minute vid (and be fair to your audience) you should have had a smoking hot blond in a bikini demo’ing the things you tried fitting to the Milwaukee box.
Gotta love that 10 sec. Skip function TH-cam offers. Agreed too long unless you skip in order to get what you're looking for.
7 minutes of my life I'm never gonna get back
Johnny Doe i think its a joke. Lol
Sam Cade I think Johnny doe was joking
Johnny Doe you must be fun...
If they want to go fancy with these boxes, they should design them, so you can remove the bits with on hand. Some times I even need pliers to remove them, especially with oily hands
Dude acts like he just discovered buttered toast... Please don't do a 7 minute video on that either.
Stop by next week to discover how magnets work.
7 minutes and 30 seconds of it was essentially “no shit”
Just wondering how long it takes him to complete a home improvement project?
Celebrity's do not do home renovations so probably million years
Dude seems to operate in overdrive when he’s motivated and has a goal. Probably surprisingly quicker than most people out there. Not to mention he’s likely the owner of the construction company and not the one swinging a hammer anymore. Can you imagine working for someone who operates at 2x speed?
You are an awesome guy!!! We all appreciate your reviews and all your videos. Keep up the awesomeness!!!
Go ahead with a great order and order a second meal
I store my drill bits with the cutting edges in, not out. First, you never worry about cutting your fingers when putting them in or taking them out. Second, it is easier to see and compare rod sizes than imagining the rod size when looking at the sharp end. It is easier to hold a bolt up to the flat back and see if the bit is a good size. I like the carriage bolt honorable mention idea. The magnet would quickly attract sharp iron filing that would have to be removed or risk injuring skin. The other ideas are good but esoteric for my own use.
I never cut my finger doing that I store them normally.
@@BannedByMe oh man I have. When new they are hard to remove and I did it first try. Been very careful since, but I'm gonna flip em over now
Dude drug this video out 7 minutes too long. If I had to listen to that voice on a daily basis I would drill out my eardrums. Hang on I’ll make a 7 minute video on it.
Great thing about the internet is, no one is going to shoot you if you don't watch the video.
James Hhhh if they did it would have to be at sniper distance with cover and concealment. Otherwise an exercise in futility.
Cry baby.
@@MrJamesTimmons because your such a badass?
why are you randomly shouting? i turned off instantly.
I noticed that too, but I guess thats his signature!
His schtick. He has good videos though this one was entirely too long, but that's why they give us those 2 triangles that point to the right. (Fast fwd).
Well, time to buy a bag of 1/4-20's, a few magnets, and some epoxy. Thank you for revealing the answer to "What the hell is this for?"
My guess for why they dropped the belt clip is that someone went up a ladder and the bit box came down way before they did.
Good idea, and good guess, I’m gonna ask Milwaukee why they “Dropped” the belt clip!!
If the magnet doesn't go on sale im thanking you ahead of time for the DIY tip.
I’ll stop at this channel once in awhile. Still too many Theatrics. This should be a one minute video. I appreciate the channels where they get right into it without trying to be a comedian.
Dude, you have a rare talent. Being able to talk a lot about very little. I for one envy you.
You mean his a great bull shitter
@@maxwaters1461he'd be a terrific political candidate; to expound virtues of 1/4"-20 female threads in a mere 7+ minutes.
And who watching this couldn't MAKE a belt clip or loop to hang from belt, ladder rung, maybe ear gauge? At least they have a clue what size screw to allow for!
I've got 2 sets, and I put a small carabiner clip attached to short nylon webbing on each. Then I just clip them to the D rings for the shoulder strap of my main tool bag. Keeps them hanging conveniently on the side and frees up a lot of real estate inside.
I watch a lot of dumb videos on TH-cam, but this one takes the prize !
Sorry VCG I am a fan of your videos but this time I have to call BS! Everyone knows 1/4x20 is the correct size and pitch for the uranium powered flux capacitor. Secretly used by your shadow organization to retrieve that sweet 80's techno sound byte for your intro.
😂😂😂😂 sonny
I had to check to see if this was released on April Fools. 😂😂
Thread in a bolt and put the bolt through one of the screwdriver holder holes on top of your ladder so the box doesn't fall off.
You could probably put a screw and lanyard to strap it to your tool belt if your working up high.
The magnet can hold fasteners and make them temporarily magnetic to stick to your tool...
You beat me to it!
Probably their tests for the belt clip was turning up multiple failures one and the most major of which I can only assume was that the nut in the case would eventually after X amount of times tear out or the latter of my two ideas was the case would open/it'd get snagged.
I'm wondering if the belt clip is no longer available because it wasn't a tight fit on your belt and they slipped off and fell. Hitting a co-worker with a falling object is a safety issue and they probably got tired of replacing the cases after breaking from the fall. 🤷🏻♂️
Always learning something new here bro!
Thanks TRZ we appreciate it !!
Hi Vince, you recently reviewed Milwaukee’s little red shockwave toolboxes. Any idea why the bits are so hard to get out? I’m not fond of having my fingers slipping on a drillbit trying to pull it up and out of a too tight holder, and slicing my finger open. DeWalt has a much better style. Flip up 90° and pull the tool out with no effort. I’ve resorted to putting a small stubby screwdriver in the box, and prying up from the bottom on the bit shank until it breaks free. Much savings on Band-Aids!!!!
The main reason they have the super duper secret 1/4 20 nut is because guys have waisted miles of good 3m electrical tape, hiding the helpers tools in the ceiling... So Milwaukee said *Voila* ... screw the box right to some all thread! The kid freaks out, everyone laughs and the boss is very happy because only time was wasted... no tape!
🤣🤣
IBEW local?
For any photographers, we have Peak Design Capture Clips that can be bolted to the Milwaukee tool boxes. Then you can attach the boxes to ANY belt quickly and easily. We also have 1/4”20 neodymium magnet mounts that can hold about 10 lbs.
Where at ?
Holy CRAP!!!! this damn video could've been (SHOULD'VE been) about 53 seconds long, but he dragged and fumbling his way to 7 f'ing minutes.....my lord that was painful.
I’m for the gorilla arms kid. Always something fresh cuz. Tommy likey
You da man High Ride , thanks bro we appreciate it!!
Interesting, but your killing me with the way you say RARE EARTH MAGNET 😂😂😂😂😂 love this channel
🤣🤣🤣
My guess is to hang them on a wall in your garage or shop, peg board or a sheet of wood, whatever you can think up, everyone’s got different and good ideas 👍🏻
That magnet is slick....slap it right on the side of the drill press!
So slick that it will slide down other slick surfaces and fall off anyway.
@@HunterXray he was sticking it on stainless steel
So what is that hole actually used for?
Well that’s 7 minutes of my life gone forever. FAIL👎👎👎
Now I can keep my bits on my fridge!
Thanks Vince. Great video. The Kick stand is my Favorite option.
use a magnetic gorilapod. you could use one of those fasteners to attach a belt clip.
Cool video bro I always ask what the fuge is that for thanks to you no more of that 🤔🤔🤔
7 minutes of my life I will never get back
Annoying personality geeez
8 Minutes if you check back on comments ;p
Carl Pavey hahahhahahhaa
Nice
Thanks Keith!
Something awesome about those boxes that I found out recently is if you have an old one they will hold Bosch daredevil paddle bits perfectly
Whoa sweet!!
i think some of the cases weigh to little to be used with a belt clip, i used it on a ladder and it popped off, opened up as it hit the ground and just scattered all the bits, never ever saw 30% of those bits again
Whoah that stink, sorry to hear that!!
I always thought it was for a tool belt clip.
I think the reason Milwaukee doesn't sell the belt clip anymore is because the nut will pull out of the case. If you look at the case, it shows the nut was pressed in from the outside instead of the inside. So when walking around with the clip on, the case would fall off & spill everything.
Oddly as a mechanic...that magnet on the bit case...helps keep the case stay put under the hood of a car while your working on it. I've known about it for years actually!
Awesome Kenneth!!
You do much drilling on an engine like??
he drill a oil sump when he change oil ;)
U should cut those bolts in1 inch piece sick them between each box .stack them like rotating stair case. Would like to see what happens.
🤣🤣
I've never ever ever in all my years of working with tools seen a guy walking around with his bit box on his belt... the reason they don't sell the clip is because they know its a dum idea but they put it on because "the more features the better"!!
Also i do believe the bit holders rotate so...um...why the stand idea in the back?
The video is meh but in the end its just a bit box fantasy and probably slightly more expensive bit box that you can get for a cheaper price from dewalt or ryobi for the same quality.
DeWalt? Cheaper? Yeah, because that's what their junk is known for LOL
Ryobi??? Why are they even being mentioned in the same conversation?
My kid is 7 with his own tool box, and even he knows better than to use Ryobi.
HAHAHAHAHAHAHAHAHA
DeWalt and Ryobi he says, damn youngins....
@@carlspackler91 Carl Spackler Carl Spackler Carl Spackler Mr. Spackler i respect your opinion very much but i do believe a lesson is in order.
The dewalt bit and the ryobi bit are likely manufactured in the same factory and branded in the same factory then shipped to dewalt and ryobi for packaging.
As for the molded piece of plastic called the bit box or (whatever you call your bit box). I don't give a flying lump of **** what its features are do they hold the bits yes! Does a ryobi bit box hold my bits? Yes, does my dewalt bit box hold my bits? Yes, there the same.
Also your kid has a tools at age 7 wow you must be rich and not making sure your kids not looking at tool porn at night because thats bad at his age you know!
I got my first tool at age 10 and it was a handy down form my dad as a reward for helping him build the deck that still stands there to this day (20 nearly years later) (the tool was a square).
Now the reason i mentioned dewalt and ryobi was because it applies to two types of people the "homeowner" who couldn't give a dam about it as long as it gets the job done and then you have contractor/real man (maybe) buy the most expensive brand of tools because there the best!!
Ryobi being a "homeowners" brand just need it to work so yes it will be of a lower quality and this lower price.
Dewalt on the other hand (mostly) is ment for the workplace so its more powerful, built better, and will last longer thus being more expensive and better held in regard.
And ryobi is not the shity brand of handheld battery powered tools that title goes to mastercraft in my books.
I have my intelligent reasons for saying the things i say and would rather not be insulted by being called a "damn youngins" when it is very obvious that you good man still have much to learn.
Respectively Mr. Pearson
Cheers from Canada.
@@feltonfolder420 Well YOU, my good man, need to take it easy and learn to recognize satire when you see it.
Rich?
Hardly.
I work for my money.
My kid has hand me down tools as well, that's why there's basically Klein, Estwing and Milwaukee in his stash because he gets MY hand me downs.
I switched from DeWalt to Milwaukee 8 years ago and haven't regretted my decision once.
I was sick and tired of always having to charge my batteries on the jobsite.
Ironically, I just finished some work, begrudgingly with a DeWalt angle grinder because it's what they bought for the shop.
Even with 2 like new 20v lithium ion batteries fully charged when I started, 4 short cuts into some aluminum/ mild steel proved to be too much for the mighty DeWalt grinder.
They never fail to prove my point.
DeWalt should be your first choice, if you don't like your money and you like stopping in the middle of a job to look for more suitable tools.
I do agree with your point, that for someone who is an interior decorator hanging some fabulous pieces of art inside a home with 1/2" sheetrock and they don't want to risk injuring their weak little wrist, Ryobi is the perfect choice.
Take it easy over there, you'll live longer.
You old fart.
HAHAHAHAHAHAHAHAHA
@@carlspackler91 Carl Spackler Mr. Spackler you bring up good points, but im confused as to why your shop bought a battery powered angel grinder?? Unless your doing very light work (wire brush/light grinding kinda work) thats poor knowledge of tool use i feel bad for that angle grinder you should always be using a corded tool when cutting metal. I think you need to have a word with your quartermaster about the proper tools.
@@feltonfolder420 You're right, but I've found that discussion to be futile at best on many occasions.
Hence the reason I brought the corded Milwaukee out of my own stash in my truck.
How much of a madman do you have to be to attach a gorilla tripod to your bit case instead of just taking out the bit you need and leaving the case in your bag or on the ground
I wouldn’t leave the case on the ground!!
I haven't watched yet, but fixing to. I'm guessing you're going to talk about the 1/4 -20 threaded insert on the back that is meant for magnets and hooks
Yes sir!
Love your vids..you earned a sub in me
👍👍
I just subscribed , why ?
cause you told me to !
Been watching for awhile. Subscribed. Nice to know about that Makita case hidden storage. Def never knew that. I'm an electrician almost 30 years now. Point Pleasant NJ over here,
Yoo buddy we're practically neighbors!! Thanks we appreciate it!!
These cases also nestle very nicely in to the back cavity of the rolling Packout box. The angles match up perfectly.
Beautiful thanks for the feedback Daniel!!
Yep I knew it talkin about the 1/4 - 20 thread insert. originally that was an accessory for a magnet on an M12 work light and they also offer hooks
We couldn’t find any hooks!!
Kickstand makes the most sense. Thanks for educating viewers like me. #DIY #VCGfamilyforlife #Goodtimes
I like the kickstand myself! What other ways of using the fitting can you think of Victor?
VCG Construction I think retrofitting a screw/nut and bracket like an old phone belt clip so I can pop off when needed. somehow make a row of clip on/off storage. Makes sense in my head but could be an idea. Lol 🤔😂
That’s a good idea, I’ll get on it!!
VCG Construction patent pending lol
Yeah buddy 🤣🤣
My case came with 3 belt clips along with my m18 drill and 1/4 drive impact and I made my own magnet for it and made a carabiner clip and strap . The clip you had didn’t look like mine , mine looks like the one on you impact on the shelf behind you . My favorite one is the strap w/ carabiner it’ll hook onto anything !
not all grades of stainless steel is non magnetic.. there are several grades of magnetic stainless.
Vince you Blew my Mind Off!! Amazing!!!
It can also be used to attach to a lanyard for overhead work.
that was what I was thing beforehe showed us th real attachments
@vgcconstruction can you review the Skil spt88 worm drive mitre saw before I drop 600 beans on that jawn?
i'll do my best to take a closer look real soon!
VCG Construction Thanks Vince because it’s getting closer every day it may happen by the end of the week, I want it!
i use the M12 stick light on a daily basis at work...i never bought the magnet cuz the price kept going up everytime i wanted to buy it...at one time it was $30 but now HD sells it for $22...not worth it for a magnet in my opinion
It is expensive!!
Just get some threaded rod and super glue a magnet on to it
Maybe epoxy would be better Now!!
kingofthecrease30 I originally got the magnet with the m12 light... lost the light but not the magnet! Now the magnet rides with one of those red boxes. It is practical when working on tightly spaced equipment where a tool belt is too much or a at height. I just fill up the red box with bits, pencils, markers or whatever and hang it. Kind of like the Fluke meter magnet to use in panels or to hang multiheads. But at $22 it's too expensive. If it were $5 it would be very worth while.
put a 1/4 20 eye hook and attach a lanyard to it when you up on ladder or bucket truck lift so you don't drop it . that's how i use it .
That’s a good idea thanks for sharing bob!!
@@VCGConstruction i always dropping my stuff it sucks when you 30ft -50ft drop something then you go down to pick it
I did build a unistrut bracket with 1/4 rod and stand off claps worked pretty good but found out it’s better to have them with me where the works at,so most of my kits made it back into my packout.great vid Vince love the intro music!!!
I feel the same way as you about setting them up, I’d rather have them in my bag!! Thanks Ray!!
Holy moly!!
Could have said everything important in one minute. "Is this real stainless steel?" Hint #1: Since it's a shelf it's probably chrome plated steel. Hint #2: Even if it is stainless steel, it could be magnetic. Not all stainless is non-magnetic.
4:40 and you can skip all the random banter
You can probably take the belt clip off of your M18 Impact and put it on the box. I take them off the tools anyways maybe they intended them to be used with the boxes
Nah, they need some modifications to fit the box!!
I just ordered the Gorilla Pod... :)
That intro music 🤣 was it in Scarface. Another good video Vince👍
You da man Wealro!!
The kickstand idea is pretty cool!! I think they got rid of the beltclip idea because where are you supposed to fit it with a toolbelt on. That's my guess, but what do i know. Always hitting us with the great tips brother!! Nice vid!
VCG4LIFE!!!!!
Thanks Amos we appreciate it!!
U love is instant!!!!
No belt clips...I think because of the Packout system and everyone is putting them in the cases...I know I did..!
I think the belt clip may have just been a slow mover, what do you think Zee?
@@VCGConstruction Vince I have to agree...gadgets can be addictive...I know...I bought the Packout...and next thing...I have the three regular boxes...bought another two tool boxes...and then 4 different slim and half Packouts...now I have to get the magnet...!
I hear ya Zee!!
28 bucks for a magnet with a bolt I can get like 10 earth magnets epoxy them bitches to any tool box not just Milwaukee and still have the same useless effect for less
You can make your own to clothes too..no one will notice...really!
@@patrickprice6215 china makes them cheap enough no need there
Always wondered what that was for but I’d never use those attachments lol
Me neither, Now i'm trying to think of other ways to use the nut adapter!!😂😂
VCG Construction a few days later I still got no ideas.... this is going to haunt my Milwaukee’s every time I use them
🤣🤣
Responsible people are now triple subscribed
Should do a video of customization of these boxes.
What would you like to see us do to them?
VCG Construction I just meant show if you loaded any up with other tools. I have customized some of mine with other gear, for instance I have added 1/2”, 3/8” and 1/4” hex drive adapters to one case so I have it to use to drive any size socket with the impact when I work on the car of other equipment.
Got it, we’ll make a video thanks Gary!!
Sorry Vince, It was actually completely designed for me. It's actual intended use is to be screwed onto the work area in a secured fashion so that when I can't get the bit out of the case when I need it, I can't throw it at the wall or window, thus creating more work for the tapers or glazers. There, now you're in the know!
🤣🤣
Nice video Vince. I didn't really pay much attention to the drill and bit cases. I have four milwaukee cases. The drills which fit into an impact driver I have trouble pulling out. They are in so tight I need something like a precision flat edge screw driver to edge them out to avoid cutting my fingers in the case I'm not wearing gloves. I recently bought the cobalt drill bits. I also have masonry. Milwaukee make some very fine drill bits and their quality is good.
Working with the Milwaukee shockwave boxes, I’ve noticed that it can take both hands to get a bit out, that’s why I don’t think Milwaukee offers a belt clip with them. Imagine pulling a bit up one handed and your whole bit box just flew up and out..
Yeah that wouldn’t be good!!
How many drills does this guy own?
I made my own screw-on magnet before those were available. Bought rare earth magnets at the local surplus store, with holes already in them. I also have one of the smaller boxes with a belt clip, which came from the surplus store as well. Been using these for quite sometime now.
I think the kickstand idea is brilliant! Cheers, keep up the great videos.
@vcg_construction Heard you can buy M12 belt clip to use with it if you want check. eBay they have em with the screw. I. Think it's. The same size I just wanted to pass that information along and might be an idea for people that can't find the Belt clip that originally was supposed to go with it the Milwaukee M12 belt clip looks a lot more low profile I do like the magnet idea reminds me of the DeWalt magnetic cases I'm just passing this information along cuz you're maybe people that don't want to put the magnet and just want a belt clip you have the M12 baby the belt clip fits you could try it I'm just after examining them thinking that might work add a second idea instead of the magnet people want to put it on their tool belt #justsaying
I like that magnetic attachment with the box. The DeWalt boxes don't have that option. 50k soon guys!
You da man Kevin!
Either I got ripped off by the Home Depot or these were recently discontinued. I bought my shockwave set back in 8/2020. It did not come with the hole. Not a big deal at all but I'm just curious.
Would ya just look at it
From all the comments, the craziest one is probably the best explanation, Space craft usage, seriously, that's the most viable use with the magnet..
Wow Milwaukee in space, the final frontier!!
Hmmm, I wonder if an old removable drill handle threads into it...
We can always check sir!!
About the belt clip, it's a hazard to have any thing on your belt. Perhaps this is why they don't advertise it this way.
(Personally I use a tool belt and are aware of the dangers, but looking around for the tools you need all the time "ain't no body got time for that ")
An acquaintance of mine fell off a ladder and shattered his hip because there was a hammer in his holster, and it happened to be right where he landed.
Maybe this is milwaukee trying to ward off a lawsuit and evil spirits?
Cheers
"Is this real stainless steel? NO!" (Surprized laugh).... LMAO! Oh man. Nice video though. Thanks
Nautilus20 there’s plenty of SS grades that hold 🧲’s...
I thought they were going to offer a camera option for the boxes and you could use the integral 1/4-20 nut for attaching to a tripod. But he didn't mention that. I guess no honorable mention for me. Two bad. I would have liked one.
As an aside it can be a bitch to get the drill bits in and out of those boxes.
The toolboxes have 1/4-20 bolt holes as well so you could use a double threaded stud to attach too the tool box.
Its for belt clips and magnet attachments Milwaukee used to sell. its 1/4 by 20 thread fri, throw a bolt in it of you want.
Saved you 6 and a half minutes.
Just like most people I like having my kickstand Vinny doing an awesome job keep it up
yeah cuz the kickstand!!
Still doesn't make much sense but the magnet may be the way to go. Thanks for the video~ Your electric brother from another mother!
I've always wondered how that would attach to something. To bad the cases don't flip together like the DeWalt cases. Thanks for doing the video!
this gave me a better idea. instead of the magnet, just bend a bolt to make a hook and screw into the side. beats knocking the box off your scaffold/ladder and you can hook to anything, not just ferrous. belt, wood, saw horse etc.
Look at them, I mean just look at that!?
The threaded insert on the Milwaukee cases are nice- I threaded some cheap magnets in them and stick them o thr side of my rolling tech cart