Stick Welding Tips for a 4G Overhead Weld Test | 6010-7018
ฝัง
- เผยแพร่เมื่อ 10 พ.ค. 2020
- Today Rosendo will show you how he passes a 4G weld test that is in the overhead position. He will use the stick welding process 6010 root and hot 7018 fill and cap! Hope this helps you out and please DONATE what you can, together we can DEFEAT CHILDHOOD CANCER! First 50 people that donate today will receive a DEFEAT CHILDHOOD CANCER t-shirt. All others can go directly to Outlaw Leather and purchase thru the link down below, all proceeds will go to St. Jude Children's Hospital:
outlawleatherusa.com/products... - แนวปฏิบัติและการใช้ชีวิต
👇WeldTube Store👇
www.weldlife.com
Bro great video- Also PLEASE PLEASE PLEASE google ALI G you really wont regret it he is a legend.
Thanks alot sir for the teachings it has been helping me a lot. I am a welding student based in Cameroon and presently at 4G i have been following your teachings from 1G till now. Thanks alot for you have been a source of inspiration to me
The codeworks covit
Man... y’all are the best! Thanks to your tips I won a welding competition! Much love for y’all !keep uploading videos🤙🏽
In your videos can yall show what the root pass looks like on the back end of the plate?
Facts most important part
@@joshf.1823stfu josh that shxt was a year ago
They did around 9 mins
Rosendo, I owe you big time brother for this welding vid - I changed up my root pass technique to the one you use (side to side) and reversed grip on the stinger (the way you hold it) and my quality of 4 G Welds SMAW shot up literally in an instance. Thank you Mate!
Alex, New Zealand
Nicely done! Very well explained! Thank you! Be blessed guys!
I wish I was able to do this online but it is such a technical thing. Once schools open, Imma try this to prove that I have been learning.
Thanks alot sir for the teachings, i have been able to use your techniques to better my skills in school
Shoutout all the guys at WeldTube! You guys are some of the best welders out there, and great guys in general.
Great demonstration and explanation Rosendo 🤘🔥 Semper Fi Brother.
This is my channel, baby. Great teaching. Greatness. Thanks. Got an overhead test for tomorrow. Bout to go in prepared now. Thank you.
This video helped me before going in for a welding test.
You’re use of the word standby motivates me
Awesome video!!! Just what i needed. Thank you!
great refresher guys thanx 😁👍
Thanks a lot.
Any one can develop their wedding knowledge.
Good job my friend.
I need to get out of my current welding school and get into this one. Damn it, man.
Big help 🙏 been practicing in my garage with my old man his 75 old school welder but sometimes we bump heads lol then we chug a beer about it love you pops
Thank you sir,it help me a lot.Good day and God bless.
Going to a good cause, good job guys.
I'm in school rn and I just went up to over head moved up from vertical bevel this video is great has a lot of information
Rosendo! I was scrolling through utube and u popped up. love ur work bro.
Don’t have much right now but I did what I could. God bless
You guys will be rewarded for doing God's work!🙏
Very good video well explain. Keep making more videos
Thanks for your videos that you share us its very helpful on us ...
Thank you ....
Love it good pass root welding very well done.😊😊😊
Thank you for sharing this video overhead welding
You have a nice weld there. And I love your welding max
good stuff thanks for the tips!
Ya'll doing great job 👍
Video came out badass
taking notes! 👍🏼😲 good shit bro you explained so much this video really helped out a lot.
Thanks
I love this lesson
Watching this makes me want to make TH-cam videos these guy struggle with so much but they get the job done.
Great tutorial bro!
Bro you explained it so well 💸💸💰
Thanks so much it's very help me
Nicely done! Very well explained! Thank you
VERY VERY WELL. GREETINGS FROM CAMPECHE, MÉXICO.
GRACIAS POR COMPARTIR ESTE INTERESANTE VIDEO.
SALUDOS DESDE HOLLYWOOD FL , USA.
Si señor muy buena soldadura
I love how easy yall break it down. I just got into a school for welding and our certs will be 3-4g and if we pass those we do 6G if we fail they put us down to 1 and 2 so im watching all yalls videos i can. Also i was wondering if yall could show a 6G with Stick. I notice yall have Mig and tig but no stick
That sounds like a great school man! I
Hope you like it there and i hope you’re doing well
Tnx bro,,,,it's really good way to good weld!!
Sempurna👍👍
Great video… ok…nice root…ok…ok
Perfect 👍😍
Soy de panama hacen buenas obras los felicito
😊
Respect in Morocco 💙❤💪
Magnífico
Big up WT👌🍁
When I would mig 4f fluxcore 045 I always burned through when I stayed but the rest of the weld was beautiful and had penetration, our test was on some thin ass plate too. Can’t remember the size but I still passed even though they wanted to fail me. I retook that test 3 times and still had the same out come blew through at the start perfect the rest of the way. I like 5F the most so simple. I worked at Trinity Rail
You gotta run the root kinda cold on open fluxcore. If ya fit your plates about 3/32" land and 3/32" gap it should spush thru enough to backweld without much grinding without blowing a fatass keyhole. Yall probably tested on 5/16" or 3/8" plate if it was for railcar.
I really like your vedios keep it up
Thank u sir
perfect Bro
I like your video it's good....
Teachers teachers achievers
Patrick Pearson rutil???
Nice one brader
this dude is definitely giving a hip pocket class 🤣
I run the dollar bill gap (1/16 for those that don't know) with feathered edges. I run my root at 120 amps while the stick is at a 45 degree angle. My roote come out perfectly but it's my fillers that are killing me because of the inconsistencies I keep having
Where did you buy that welding jacket from?
Thanks for the video, teachers. Is the current AC or DC? 🙏
I'm glad you made this video but for demonstration I would rather you hotpassed 7018 instead.
Should I be at a certain angel when welding over head and is it bad to push instead of pulling because I notice myself getting out of place once I’m mid ways down the weld I gotta test this Friday and I’m just wondering if it bad to start off pulling and end off pushing
watch the opening if you whip it rod to the left look at the gap to the right
Hi! I would like to ask you ,where I can buy welding mask like your?Thanks!
Weri good welding
Cleaning and visually examining the penetration from your initial root pass on the back side of your plate is a great method of checking for lack of fusion, incomplete tie ins, and the amount of convexity of your root pass. I noticed that you neglected to mention any of these points in your video.. Didn't hear any mention of the recommended rod angle that you are using during this demonstration. Is your 7018 fill rod a 1/8th or 3/32nd electrode. However, you did cover a lot of great points in your video especially for folks starting out.
My instructor is making us use 7018 for the root pass
Great show to learn from! Maybe FR clothing ? industry requirements !!!
Rick A. Shriver its électrode rutil ????
Seems like I wasn’t the first 50 to donate. Think I was a little late watching this video
Serious question, why did you not use stich method on root pass like 2g and 3g
The Greatest Leader In The World!! #legend #royalty #AARON
Can’t find link on my phone to donate
You are majaro am so happy capit up very good lecher
For the root must electrodes thinner?
I would like to know why you chose to use the 6010 electrode for the hot pass. Is there an advantage to using the 6010 instead of 7018 electrode?
The 6010 is a fast freeze rod.
💪
I’m taking this test at a factory nearby and I haven’t don’t this type of welding in about 3 years lol I’m nervous
My weld test has a back and doesn't allow grinding wheels or wire wheels. What techniques do I use for the root pass with a back plate. Please get back with me before tomorrow. If not then dont worry about it
watch the opening , you whip it to the left look at the gap to the right
What is the brand of your welding mask??
He says "okay" so many times 🤣
Shout out to stony for teaching me good techniques
Awesome.. and i have a ❓, don't you get any puddle drops on you face that way? Or how do you avoid the puddle drops? Thanks and all I've learned, i learned it watching your videos guys.. From Michoacán Mexico saludos
If your having alot fall out on you you need to shorten your arc length
Thank you Allen.. I'll keep working on it..
Whats a good welding machine to practice welding at home put on pipe i bought a cheap one but doesn’t work what’s a good machine for home welding to practice on pipe
I appreciate the video. God bless you all. It would be great to accept Jesus now. Live for Him.
HES GOT ALL THEM MACHINES BUT HE USE THE MILLER XMT FOR THE TEST. TEAM BLUE!!
Great thing to donate. God bless amen. Appreciate the videos.
This account has helped me so much but how on earth do I not catch on fire on overhead no matter what I wear
How long are the plates
Okay.
Can I use 7018 for root pass?
Man I ain’t lyin. I’m struggling on this one 🤦🏽♂️
Quick question, what is the price of your school?
You need to let me see what the root looks like, that’s literally the most important part of the entire process.
Bro, i didn’t see your root pass both side. Did I miss or didn’t you show? Please 🙏 I was waiting for see your root pass upside
0:34 dude had an mexican and asian accent in one. Im impressed
What's the electrode angle for 4g overhead