ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Kemper Profiler Player with wireless midi-foot-controller (easy setup)
ฝัง
- เผยแพร่เมื่อ 6 ก.พ. 2024
- For my new player, I was looking for a simple and inexpensive way to operate the Kemper using a midi footswitch - wirelessly.
I came across the inexpensive Chocolate Controller from M-Wave. The special thing is that it comes with a matching Bluetooth receiver. You can even connect an inexpensive expression pedal as a volume pedal. I used the pedal from M-Audio here. Together, the whole thing cost less than €50.
Please help! I have the same setup but have a Dunlop DVP4 mini pedal instead. I used the exact midi parameters for the expression pedal but nothing happens on the Kemper (the footswitches work find though). I know some pedals need the data in reverse (so 127-0 instead of 0-127) but that doesn't work either. Since you are using CC#1 and CC#7 you are using the volume and wah functionaliry at the same time. I want to use it only for wah so I tried 1 CC 1 0 127 (or 1 CC 1 127 0 in reverse), but none worked.
Could you please explain more how to get it to work with the CubeSuite app?
You are a legend! Thank you!!
Great video. 👋👋👋
Hello, excellent video, could you tell me how you configured it? thank you
perfect, thanks. Based on your post I have now the midi controller. Question though: I want to use E and F for bank down/up. Out of the box it doesn't work and pushing the footswitch is for the 1st 4 presets OK but going further I will get lost.
What I want is the 4 buttons preset 1 ~4. Bank up (pushing F) preset 5 ~8 and so one. Seems more logical to me. If anyone can help me with that..thnx!
Hello, is the receiver part of the package of this footswitch?
And when its connected to the Kemper USB its powered? or charging? Thanks
Thx for that affordable idea
My pleasure 😊
Thanks for the video! Was it easy enough to program the foot switch to switch fx too?
Thanks for this video! help me a lot!
But I have a question,can m-vave chocolate connect to kemper directly with use cable instead of wifi?
Thank you very much.
In any case, you can also use a USB cable for the connection.
Great! thanks again!
Can you program it to switch the stomps on and off?
And how much latency does that add? It seems like a solid half second before presets change.
Unfortunately, I can't measure it, but I don't feel any latency when switching. The sound is not interrupted
Will this also work with Kemper Profiler Head?
Holy latency Batman