Piling Process | Pile Foundation | Deep Foundation | Pile Steel & Concreting steps || By CivilGuruji
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- #civil guruji #civilengineerstraininginstitute #practicalsitetraining
Piling Process | Pile Foundation | Deep Foundation | Pile Steel & Concreting steps
Call For all Details:- 9111001234
Practical Training course & Fee Detail:- www.civilguruj...
VISIT OUR WEBSITE - www.civilguruji.com
YOU CAN ALSO DOWNLOAD OUR MOBILE APPLICATION - play.google.co...
About This Video
In this video Er. Mayank Saini, Corporate Trainer will discuss about
Foundations provide support to the structure, transfers the loads from the structure to the soil. But the layer at which the foundation transfers the load shall have an adequate bearing capacity and suitable settlement characteristics. There are several types of foundation depending on various considerations such as-
Total load from the superstructure.
Soil conditions.
Water level.
Noise and vibrations sensitivity.
Available resources.
Time-frame of the project.
Cost.
Broadly speaking, foundations can be classified as shallow foundations and deep foundations. Shallow footings are usually used when the bearing capacity of the surface soil is adequate to carry the loads imposed by a structure. On the other hand, deep foundations are usually used when the bearing capacity of the surface soil is not sufficient to carry the loads imposed by a structure. So, the loads have to be transferred to a deeper level where the soil layer has a higher bearing capacity.
What is Pile Foundation?
Pile foundation, a kind of deep foundation, is actually a slender column or long cylinder made of materials such as concrete or steel which are used to support the structure and transfer the load at desired depth either by end bearing or skin friction.
Pile foundations are deep foundations. They are formed by long, slender, columnar elements typically made from steel or reinforced concrete, or sometimes timber. A foundation is described as 'piled' when its depth is more than three times its breadth.
Pile foundations are usually used for large structures and in situations where the soil at shallow depth is not suitable to resist excessive settlement, resist uplift, etc.
When to Use Pile Foundation
Following are the situations when using a pile foundation system can be
When the groundwater table is high.
Heavy and un-uniform loads from superstructure are imposed.
Other types of foundations are costlier or not feasible.
When the soil at shallow depth is compressible.
When there is the possibility of scouring, due to its location near the river bed or seashore, etc.
When there is a canal or deep drainage systems near the structure.
When soil excavation is not possible up to the desired depth due to poor soil condition.
When it becomes impossible to keep the foundation trenches dry by pumping or by any other measure due to heavy inflow of seepage.
Types of Pile Foundation
Pile foundations can be classified based on function, materials and installation process, etc. Followings are the types of pile foundation used in construction:
Based on Function or Use
Sheet Piles
Load Bearing Piles
End bearing Piles
Friction Piles
Soil Compactor Piles
Based on Materials and Construction Method
Timber Piles
Concrete Piles
Steel Piles
Composite Piles
The following diagram is representing pile foundation types discussed above.
Steel piles may be of I-section or hollow pipe. They are filled with concrete. The size may vary from 10 inches to 24 inches in diameter and thickness is usually ¾ inches. Because of the small sectional area, the piles are easy to drive. They are mostly used as end-bearing piles.
Advantages of Steel Piles
They are easy to install.
They can reach a greater depth comparing to any other type of pile.
Can penetrate through the hard layer of soil due to the less cross-sectional area.
It is easy to splice steel piles
Can carry heavy loads.
Disadvantage of Steel Piles
Prone to corrosion.
Has a possibility of deviating while driving.
Comparatively expensive.
Steel piles may be of I-section or hollow pipe. They are filled with concrete. The size may vary from 10 inches to 24 inches in diameter and thickness is usually ¾ inches. Because of the small sectional area, the piles are easy to drive. They are mostly used as end-bearing piles.
Advantages of Steel Piles
They are easy to install.
They can reach a greater depth comparing to any other type of pile.
Can penetrate through the hard layer of soil due to the less cross-sectional area.
It is easy to splice steel piles
Can carry heavy loads.
Disadvantage of Steel Piles
Prone to corrosion.
Very Nice lecture.
I supervise piling work for almost 74 building in Jeddah as a consultant.
Pls prepare one video for static pile load test and pile integrity test.
Thanks
sir pile ka koi kam ho to batana
Mery khyal mein is say behter koi nahi samja saktha, appreciate ur hard work for us, be blessed.
Humble request for you Make a serious that type of information related to infrastructure .
Really its very useful for fresher..
Thanku so much.
Excellent video and information sir. Thanks
Thank you for your comment!
We appreciate your support. We strive to provide the best Knowledge for civil engineers,
Bahut accha samjaye honsir ji
Very nice sir 👍
Aapbhuth acha explain Kiya sir
Hello VIJENDRA ARYA
Hame bahut khusi hai ki aapko hamari mehnat pasand aai , Civilguruji isi tarah civil engineers ko aage badhane ke liye mehnat karte rahega aur aap bhi knowledge dusro ko share karte rahe.
KEEP LEARNING, KEEP SHARING.
India no1 TH-cam channel 👍
Jai hind,jai bharat❤️🙏
Bahut acha and useful video banane ke liye,❤️ se dhnyavad🙏
Coupler is best for lapping but it is costly compare to welding.
Pile me Concreting ke time ka bhi video banaye
Ok
I have a video of pile concreting
Sony mujhe bhi btaao
Thanks
Dhanyavaad aapka! Hum hamesha aise hi helpful content share karne ki koshish karte hain.
Thanks for this helpful video 😊👍
Sir mera ek request hai ek video ka bahat urgent hai jitna jaldi hoga, video me 3 point rahega........
1) Pile excavation karte karte pile ka center point kaise check karu.
2) powder & chemical use karneka full process.
3) Pile excavation ke bich agar stone ayegato perfect process Kaye hai.
Please Sir bahat urgent hai, jitna jaldi hoga...... THANKS.
Thank you very much sir
Good video Sir ji, aur bhi aise hi video banaye.🙏
Nice explanation
It's very beneficial for fresher and for me. Thanks you sir ,keep continue and help us. Love you...
Great sir
So gud
After long time... Good video
Very nice
Very informative for a beginers. Thank a lot.
Thanks Guru ji,
Sir jis site pr aap video bna rhe h wo Noida ke LG chowk pr DFCCIL ka project h. Ye piling bhi maine hi karayi h jis location me aap video bna rhe ho Bridge No - 190 A1. Is L&T project me mai 2 year se kaam kr rha hu as a structural Engineer.
But mai aapse mil nhi paya mujhe is baat ka hmesha afsos rhega. Mujhe nhi pta tha aap yha pr kbhi aayege....
Now i understand the concept.....actually i just done my bbs of piling....and now i m totally clear about piling...thanks.....we just finished our cleaning and flushing dredged muck of pile
Dear soil bearing capacity kitna bataya
Please upload more video about pile foundation
This is the best coupling joint for the project...
I am waiting for this topic badly,thanks civil guruji🙏🏻
Coupler has high strength & transfer the load vertically frm one steel bar to another without any wastage of steel.
P
Welding karenge to kya hoga??
@@abinashbehera9651 ductility will reduce.. and so strength is reduced.. suddend breaking can be possible due to high temperature of welding pattern of grain of steel molecules changes and it makes it weak..
coupler is economic for dia of 16mm above..
below 16mm prefer lapping
always avoid welding
Awesome
Lapping is best option always
Very highly informative... Far far better than other video on net..
BHT BADHIYA SIR THANKU SO MUCH
Very good video for civil engineer👌👌👌👌👌
Very good video...fabulous explanation..👍
Very use full video🙏
Best guidlines. Lludhiana.
Naice sir
Very informative
Mujhe saharanpur me paling karani h mujhe apna moboil number de do
To pour concrete we use Tremmie pipe not casing pipe. With due respect.
😂😂😂😂...sahi bro👍👍👍
Civil engineering se private job me bahut km scope he . Me bahut presan ho chuka job dud kr . Ek bat hi bolte sbhi ki fresher job ke liye elegable nhi he. 😢😢😢😢
Hmm yr 🥺
Kaun se place se ho
Scope to aj ke time pe civil Ka hi sabse Jada hai
@@Thetruth-in3ic mo sagar se hu
@@Er_Madhusudan_Dubey ache se city Mai try karo jaurur mil Jayega
Nice
Very well explained
Thanks for liking
Coupler is best for lapping in tension zone
Thankyou sir for sharing this valuable knowledge.....
Very helpful video sir
Very nice video
Coupling
very nice informative video...
Sr I am piling engr your information is superb
Nice topic covered
Please upload video about pile cage
I am pilling worker Opreter
very informative video
Beautifully practically explained
coupling best
Outstanding sir 👏 amazing information 👏
Thanks sir g 💖
Nice efforts and proper concept explanation. Coupler connection detail to be elaborated. Awesome video.
Extremely well
Very nice video sir.. it's too much interesting
Mayank saini ji good morning
Very good sir 👍
polimar bentonite cheking k bare btaye
Very informative Video.
Can you explain the step by step concreting process again which we do to avoid segregation?
Many thanks
Thq
Sir ,please make a video on bridge construction
very good video
Good.
good explation
Lapping sahi rahega, coupler would also be nice option. Welding is not preffered.
Concreting bhi dikhayiye
Nice information sir Meri site m pile foundation work chal rha h yhi size h 1.2m dia ka
Nice information ❤️
hope you can make video in English so everyone can understand..
It's good in Hindi.
Hindi is best
Coupler is the Best.
Coupler is always best for wedding & lapping
Good sir
Good knowledge 👌🙏
Sir types of foundations p video banaiye and uske uses ke bare me bataiye.....please sir
Boht acchhe bro
Coupler is high strength
Clearly explained sir
Tremie pipe ke button me kuch nahi laga rahta, Warna water to pipe k inner se thoda upar tak aajata hai ..
Super sir
Very informative video.
Thanks sir
Coupling is best, but we are engineers so we have to go thorough economic
Coupler will be the best
Helpful video
Sir master ring ki cutting length and dimension kaise decide ki jati hai?
Excellent 👌👌
For lapping coupling is best bcoz no eccentricity
Coupler is best for greater than 16mm dia
Soil bearing capacity less than 24 KN/M^3 then use pile foundation.
M3 or M2???
For laping of more than dia 32mm steel coupling (mechanical splices) is good
Bore depth kaise check hoga sir??
Very informative.. thanks a lot.. Please share the productivity of the construction demonstrated assuming required reinforcement is fabricated already with equipment, labor required to achieve the productivity. Thanks..
Sir aap iske drawing ko explain kro
Coding kese karete h
TCS se
Sir bridge engineering ka online training start kijie pls
Sir is mein kon sa grade ka concrete use hoga
Reply sir
M25 ( design mix )
Sir can 32 mm dia bar be straightened manually?
Laping and capling best