Used Tenshock f1 High Performance Tunnel Hull FE Rc Boat
ฝัง
- เผยแพร่เมื่อ 18 ก.ย. 2024
- Tenshock f1 High Performance Tunnel Hull FE Rc Boat
EBAY VENDOR
www.ebay.com/u...
SMC HCL-HC FLIGHT
2200 11.1v 80c
www.smc-racing...
SMC HCL-HC
5500 11.1V 120C
www.smc-racing...
Thanks for Watching Ironclad Rc Tinker test and tune everything
Personal contact information ironcladedout@gmail.com
My first boat when I was 12 was a Kyosho F1 tunnel with a brushed outboard
Same, first boat I had in back in the day was a kyosho Wave Master with the dolphin 550 brushed motor running 2 nicad packs in parallel, great times!
@joshbsz that was it!
Nice setup. Thanks for sharing your new boat with us!!😊
What a great looking boat man, seams fast with the bigger battery as well
Thanks brother, yeah that 5500 was getting off for sure!
That's a bad ass boat Big B. Cool as hell
Totally agree with you on the Seaking esc’s although I have had a good run with the Seaking 120 amp pro but I have to waterproof them myself.
The tenshock 60 amp esc that was in that tunnel are one of the best esc’s I ve ever used but very expensive the waterproofing is the best I’ve ever seen and they are so light it’s ridiculous. I accidentally hooked up the bullets backwards on a run I’m not good light one afternoon and that was that. All that money no reverse polarity protection.
That will teach me to run both battery bullets terminals as females to go into the xt60 on the esc.
Im in the same boat as others , really nice boat , well designed , runs on rails , want one .I like the idea of an F1 boat , but motor under the canopy .
Totally agree. The tfl cauldwell is a good one but it's got a big price tag.
That certainly is a slick little machine......
Awesome running boat good find
I have wanted one for a long time until i heard of the drive line problem. GOOD ONE B. LOOKS GREAT.
... but the Seaking ESC worked flawlessly! 😉
What a great score you made on this one B. I have admired this one from afar for some time. Looking forward to seeing it become Ironclad
You and me both! Excited to share the journey
sweet little boat 😍
Thats a nice new toy...! Runs nice
Nice boat Big B 👍 I really like the drive line of this boat, inboard/outboard, seams to be the best part. Possibly a good choice for a catamaran however the transom would need to changed but it would give you all kinds of room to move the battery back and forth.
I know your creative wheels are justah spinning Big B 🤣, make her ironclad!!! BGFL.
As good as that runs out the box, you should pull a mold, build a carbon fiber hull...
That turns unbelievably good!
Wish I were that good. Definitely something to consider...
man that's a gorgeous looking boat bro! nice setup with the motor and tail rudder everything! 😎
Nice score big B!👍🤙
Great rudder arrangement! 👍
Great boat 🎉
Ok i read all the comments up to now and not one person asked this so i will, how does the self righting work when both sides take on water?. Other than that I'm really jealous.great boat. Bg4l
When the boats upside down it kind of teeter tots the hatch, one of the two sponson, will fill with water and sellf right the boat
@@IRONCLADRC ok maybe you can show that when you're comfortable it won't fill with water. Oh and by the way...u da man
@@jimstone5339 gotcha
Me again ! just had a thought , yes it did hurt , Does that raking transom mean the prop arcs and gives an auto trim effect ? If you change the servo ? can you give us a slow mo of the back in motion ?
Yes sir, I'll definitely make a video of the servo replacement, and do a slow motion..
Man, looking good that fe tunnel boat, mice... you were saying about that servo being weak, but i have a gremlim compared with that you had on the recoil 2 that you solve but the one i have on one of my boats is a mystery. The boats runs good but sometimes the servo does not center and the is most of time turning right and its trimed, worst i sometimes turn right on the transmiter and the boat turns left ... i replaced the servo, the transmiter, the receiver... hell its the same ...the only i didn t swap was the esc. Could you give some advice,?
Check the steering conectors make sure there good and tight.. if that's not the case loosen the rudder connector, zero out the servo then align the rudder with the "keel" tighten once lined up
@@IRONCLADRC Thanks man, i already done that procedure and all seems good and tight. Thinking again that gremlim thing appeared mostly when i was forced to run my boat in salt water when i was banned along with my friends of the local pond, but i rinse thoroughly everything. I love this boat too much to give up. I got to find this GREMLIM. Thanks again.
Hey Big B, seems to have solved the problem, for sure it was something related to the electrical contacts on the plugs tthat go on the receiver or maybe... or maybe the steering potenciometer onthe transmiter. That salt water makes a MESS... but nearby i have no other choice. Continue sending more stuff...
I dont know why the hate for the seaking esc i have 3 120amp and one 180amp and they work insanely good all factroy no extra waterproofing and in sea water. Also they get wet alot also sank some times one of them is on a custom made thailand boad and it gets really wet 🤣🤣🤣
Not so much hate just bad experiences with hobby wing in general. Max 6 180 SK several 30's maybe just my bad luck.
I'm in fayetteville nc just got a Sonicwake v2. Are there any restrictions with using it at parks?
You'll need to contact parks and recreation, or just go to the pond and check for no rc boating signs. If your respectful to the wildlife and people around you, you'll probably be 👍 okay 👌 always clean up your area after your run
F1's look soo good....
You assume we THINK you're a nut ?😂🤣😂🤣
Sometimes you feel like a nut, sometimes you don't."
That set up is sweet...
Hey, like F1 Tunnels? Check out the Motion RC Bancroft "Mad Flow V3" 23.2" Tunnel Hull. Ive had it for a bit now, a fun boat to tinker with.
Yes they are. My MAD FLOW has a 2958 ROCKET 6S capabel upgrade. 6s is to much for it though. Mine is painted like RICHARD PETTY"S STP CAR.
I'm considering picking one up if uncle Sam doesn't take all my tax return. Lol