WOW!!! I followed your instructions and I'm able to populate LOG40M by sending log data from WSJT-x. You showed me how and I made one change to send the data to LOG40M from WSJT-x and it was simple AND it worked. Now everyone that I log goes into LOG40M from WSJT-x. Many thanks for this simple and easy way. Grid Tracker is next. Sub'd and liked!!
You Probably didn’t need to enable the re-broadcast in grid tracker out on port 2237. In fact, having it there and enabled might cause problems with WSJTX unless you were careful to start WSJTX first. It also might’ve been better if the video had shown where in the gridtravker configuration you entered port 2236 to feed log4om. It’s pretty obvious, but it still would be good to show it.
Thanks for the video, found it a while ago, just got around to watching it, I've been trying to get these programs working together for ages and now they do 😊
Thanks Mike... That cleared up one of my issues.... Now to find out why I'm getting port conflict when I have both Log4OM & WSJTX open at the the same time!
Installed Grid Tracker today based on what I saw on one of your recent vids. Really superb and just what I need for an “analogue radio guy” like me! Cheers
Thanks for this great vlog, it comes really handy and in perfect timing as I just installing Log4OM in conjunction with WSJTX. 73s GUD DX and greetings from Guatemala 🇬🇹 de Juan TG9AJR
Hi... You say.... Start program in correct order.. So is that Log4OM -->> WSJTX -->> GridTracker Also does having OmniRig installed cause issues.? I plan to have it for Log4OM FT-991A CAT Control Which will also CAT control WSJTX for Band/PTT etc Many Thanks.. :)
OK but how to make WSJTX and LOG4OM working as the same time? When i have log4om connected to my trx WSJtX cannot conect to it, so i cannot make any QSO on ft8 ;) to log and broadcast to log4om over 2237
@@MikeM0XMX I think he means... He's configured LOG4OM to connect to his Radio, COM Port, Therefore he cannot connect WSJTX to that COM Port..?? Are you using OMNIRIG, so you can connect LOG4OM & WSJTX to your Radio..??
Great video. All working for me now. Using over server/client LAN with RSBA1. Only one aspect does not work .Log4om will not display the frequency at the top part of the program. Just offline. Cheers
Mike, Great short and sweet video! I have two questions if I may: 1) Callsign, name, country, etc. are missing from Log4OM2 screen (filled with "CALLSIGN") -- Before I installed and integrated Grid Tracker into wsjt-x and Log4OM2, the call sign, etc. were filled automatically with information from wsjt-x. Is it supposed to be like this? 2) Administrator privilege -- Have you given the administrator privilege to Log4OM2, Grid Tracker, wsjt-x and OmniRig like the Log4OM2 manual instructs? Thank you! Hiroshi Asada, W1CFA
Mike - I believe this is the best and clearest TH-cam tutorial I have ever seen. If you are not a teacher by profession, you should be.
Well thank you so much Mike. Really appreciated. 73
WOW!!! I followed your instructions and I'm able to populate LOG40M by sending log data from WSJT-x. You showed me how and I made one change to send the data to LOG40M from WSJT-x and it was simple AND it worked. Now everyone that I log goes into LOG40M from WSJT-x. Many thanks for this simple and easy way. Grid Tracker is next. Sub'd and liked!!
You Probably didn’t need to enable the re-broadcast in grid tracker out on port 2237. In fact, having it there and enabled might cause problems with WSJTX unless you were careful to start WSJTX first. It also might’ve been better if the video had shown where in the gridtravker configuration you entered port 2236 to feed log4om. It’s pretty obvious, but it still would be good to show it.
Brilliant, worked first time, thanks!
Thanks for the video, found it a while ago, just got around to watching it, I've been trying to get these programs working together for ages and now they do 😊
Brilliant. That's the reason I do this.
Thanks Mike...
That cleared up one of my issues.... Now to find out why I'm getting port conflict when I have both Log4OM & WSJTX open at the the same time!
Installed Grid Tracker today based on what I saw on one of your recent vids. Really superb and just what I need for an “analogue radio guy” like me! Cheers
Great to hear! Keep watching. More to come. 73
EXCELENTE ! Muito obrigado Mike, com seu tutorial consegui configurar o *Log4OM(2)+JTDX+Grid Tracker.* TKS 73's *PY5CV* (Brazil) 🇧🇷
Thanks for this great vlog, it comes really handy and in perfect timing as I just installing Log4OM in conjunction with WSJTX. 73s GUD DX and greetings from Guatemala 🇬🇹 de Juan TG9AJR
Glad it helped! Take care 73
Ham Radio VLOG it sure did. TU 73
Excellent video guide. It worked perfectly. Thank you.
Mike wonderful video tremendous help. I do not find this intuitive and you guided me through it. 73
A great vid Mike thanks Andy M7SBC..
Thanks
Thank you got it working that was a lot of help thank you
Glad it helped 73
Thank you been looking every where for this information K5KBM
Glad I could help
Hi...
You say.... Start program in correct order..
So is that Log4OM -->> WSJTX -->> GridTracker
Also does having OmniRig installed cause issues.?
I plan to have it for Log4OM FT-991A CAT Control
Which will also CAT control WSJTX for Band/PTT etc
Many Thanks.. :)
Hi. Yes in that order. It works quite happily with OmniRig. I also have a 991 and do exactly the same. 73
Nice video...I've made one myself on this very same topic. 73 de HI8SMX
OK but how to make WSJTX and LOG4OM working as the same time? When i have log4om connected to my trx WSJtX cannot conect to it, so i cannot make any QSO on ft8 ;) to log and broadcast to log4om over 2237
Hmm, dont know. You are running latest versions? I will email something that may help. 73
@@MikeM0XMX
I think he means... He's configured LOG4OM to connect to his Radio, COM Port, Therefore he cannot connect WSJTX to that COM Port..??
Are you using OMNIRIG, so you can connect LOG4OM & WSJTX to your Radio..??
Are you using a virtual com port software to connect both log4om and wsjt-x?
got it all working with omnirig
@@sq5ebm How. I haven't been able to do it.
Great video. All working for me now. Using over server/client LAN with RSBA1. Only one aspect does not work .Log4om will not display the frequency at the top part of the program. Just offline. Cheers
thank you
You're welcome
Many thanks for this nice tutorial. Question : is-it possible to run WSJT-X + JTALERT + LOG4OM + GRIDTRACKER ? 73
Hi, yes absolutely, they will all work happily on different ports.
Mike, Great short and sweet video! I have two questions if I may: 1) Callsign, name, country, etc. are missing from Log4OM2 screen (filled with "CALLSIGN") -- Before I installed and integrated Grid Tracker into wsjt-x and Log4OM2, the call sign, etc. were filled automatically with information from wsjt-x. Is it supposed to be like this? 2) Administrator privilege -- Have you given the administrator privilege to Log4OM2, Grid Tracker, wsjt-x and OmniRig like the Log4OM2 manual instructs? Thank you! Hiroshi Asada, W1CFA
Good info pal, keep safe, 73 M7LLA
Thanks, you too! 73