Thank you so much for this. Followed your excellent step by step guide and my Beko washer dryer is back working. Total repair time was 30 minutes thanks to you having done all the hard work.
Thank you so much for this tutorial. I ended up buying some diodes from CPC Farnell and followed your video - I now have a fully working Beko again! You’ve saved me a good few hundred quid and I am eternally grateful, thank you!
Thank you for this great step by step guide. My washer dryer BEKO WDIY854310F (2018 model) has a similar issue: won't turn on. D7 looks healthy (.315v and OL in the opposite direction), but the D6 looks faulty (.000 readings in both directions). Is it correct to replace only the D6 please? Any idea what replacement do I need to order for D6? The forum you've mentioned is also great. Many thanks
Hi, Thank you so much for your video, it appears to me that i am having the same problem. Though, when i use my multimeter on the D7 diode, it beeps in both ways but shows 0.3, when i use it on the other diodes, it does not beep and i have no value. I am still not sure that is coming from this circuit board? Thanks
MOST satisfying video. Followed these exact instructions and saved me £150 for repair service.
Thank you so much for this. Followed your excellent step by step guide and my Beko washer dryer is back working. Total repair time was 30 minutes thanks to you having done all the hard work.
I’m so glad!
Thank you so much for this tutorial. I ended up buying some diodes from CPC Farnell and followed your video - I now have a fully working Beko again! You’ve saved me a good few hundred quid and I am eternally grateful, thank you!
Just did this on a Blomberg LRF285411W and it worked perfectly, thank you!
Incredibly helpful. Amazing. Thank you so much!
Thank you for this great step by step guide. My washer dryer BEKO WDIY854310F (2018 model) has a similar issue: won't turn on. D7 looks healthy (.315v and OL in the opposite direction), but the D6 looks faulty (.000 readings in both directions). Is it correct to replace only the D6 please? Any idea what replacement do I need to order for D6? The forum you've mentioned is also great. Many thanks
Worked as described for me. Thanks Mink ette.
Worked for me. Thank you
Life saver! 😎
Hi, Thank you so much for your video, it appears to me that i am having the same problem.
Though, when i use my multimeter on the D7 diode, it beeps in both ways but shows 0.3, when i use it on the other diodes, it does not beep and i have no value. I am still not sure that is coming from this circuit board?
Thanks
This looks identical to our model, a Beko wdj7523023w.
Has anyone seen a video on how to replace the door seal?
I did this but sadly the machine only worked for 1 load of washing and died again. I used a 100v 2a replacement (STPS2H100).
It took about 4 times longer to learn iMovie and make the video than it did to repair the washing machine.
What value would D6 show?
I understand that D6 should show a lower value like .120v or similar; mine shows .000v and I'm trying to find out what replacement do I need to get
I've replaced the D6 with the SR5100 and it fixed the issue. Working as normal again