Awesome idea - Turn on the 12V LED with 220V - DIY light bulb
ฝัง
- เผยแพร่เมื่อ 8 ก.ค. 2023
- Witness an extraordinary TH-cam video where we demonstrate an incredible method of operating 12V LED lamps using a stunning 220V voltage. Prepare to be amazed by our creative and mind-boggling solution that defies expectations!
It was sufficient for me to convert the AC voltage to DC using a diode bridge, and since the output reached around 300 volts, I had to connect the 12V LEDs in series to operate them with this voltage.
------------------------------
Click on the link to see more videos on this topic:
th-cam.com/users/skillmake?s...
------------------------------
#led #lifehacks #LEDLifeHacks #DIYLEDLight #220VPower - วิทยาศาสตร์และเทคโนโลยี
Thank you for watching this video. If you have a new idea for a new video and the quality of the videos. Please write it to me.🙏
super 🤩🥳👌video sir .next video please make rgb decoration light with animation🙏
Titit mu di masak
does led bulb work on series ?
What is thw wattage consumed on this type of light??
@@ravikumarg4698qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
⚡️caıtion:
Please don’t touch the led lights during operation due 300v risk
✋❤❤❤❤❤❤
BIG MISTRAKE! no resistor to limit the inrush current - good way to burn out the LEDS!!!
The small boards do have resistors I think.
@@Kogacarlo the strips have - you are right, but they are designed to work at the normal rated voltage. They do little at a turn-on surge
@@Kogacarlo
But each piece barely has 10v on its terminals at ordinary 220v operation, how can they be able to draw more current as long as the voltage doesn't rise above 10v/piece?
@@yousufnofal9223 315 / 27 = 11,7 V. But I don't know how the voltage per strip will behave when you put these strips in series. My knowledge is too little.
@@Kogacarlo
Simply the voltage is devided among them and the current is the same as if there is one strip connected, but the bridge doesn't output 327v, it rather outputs about 290v instead
Finally the simple detail yet crucial that I have been looking for in all those useless videos so far. Thank you man!
✋❤❤❤❤❤❤
this is freakin AMAZING✨✨
My opinion is that it's dangerous
Hello coach, I followed the video but how to make it flash Which transistor should be added and how to master it?
Nice work ❤
Thank you! 😊
✋❤❤❤❤❤❤
Молодец)
Но на алике такие кукурузы 5 лет назад продавали)
А с такой класной светодиодной полосы можно сделать что то намного полезней)
ни защиты ничего... он походу для алика товары проектирует
✋❤❤❤❤❤❤
Touching leds while its powered on may cause electrocution due to voltage differences between diifferent points. Do not use this at home. Nice content.
very good thak.
Hi, good idea this other use of LED in 12V on 220V, however the support you show made in 3D printing I can not find the link in the description, can you tell me where I can possibly find it, not necessarily to redo this electrical assembly with these electronic components to rectify the 220V (I don't have any diodes at home and for the moment I don't have enough use for them to buy a batch, which is more interesting in terms of price, but you still need to have the use for them). On the other hand, your support can be used for 12V LEDs powered by 12V, so I might be interested in printing it to make another type of lighting.
A 1 Amp 1000 PIV diode bridge is cheap. But this is a very bad design and is dangerous
At his home is 292V not 220V. So he did 27 strips and on each strip he had about 10V. On 220V outlet you would need 19 strips connected in series to have about 12V on each strip.
@@vytautasmotiejunas7639 you are so wrong... To convert AC to DC voltage you must multiply by a square root of 2 or ~1.41
It's a dangerous project, don't try to arrange like this
Why? If you warn people, you should explain why, otherwise it is hard to believe you.
@@jtucehok You do not know why???
@@kennmossman8701 it is definitely dangerous because there are exposed wires, but i don't know why it is dangerous to arrange lights like in the video, it seems okay to me. Would you be so kind to explain please.
@@jtucehok
1. First the circuit is more dangerous that you think; there is no fuse and the wrong type of cap is used [it should be a X type].
2. Consider the strip itself. It has a direct connection [the power diodes dont count for anything] to the live Mains. For a standard interior strip there is that connection along the traces and leads - including the exposed tracks at the end.
3. Anyone touching the traces, leads, exposed ends and is grounded will be shocked. At up to 100mA it can be fatal.
4. This threat is expanded if the strip is resting on/touching a metal or damp surface. Imagine using it in the bathroom and an exposed part touches a damp wall - touching the wall where it is damp is a really bad thing.
✋❤❤❤❤❤❤
Idenya sungguh kreatif sangat kawan
✋❤❤❤❤❤❤
Very nice sir ji
✋❤❤❤❤❤❤
What are the two red plastic circles, are they specific for this work or are they related to something else that you used here? What are they related to?
✋❤❤❤❤❤❤
This led. Stip. Connecting. Series....??
عالی ایول، اگه امکانش هست لطفاً یک مدل چراغ قوه جیبی کوچیک که با یدونه باتری نیم قلمی کار کنه و در حد ۸۰ الی ۱۰۰ لومن نوردهی داشته باشه درست کنید دم شما گرم❤️🌹
awesome✌🏻✌🏻 Lovely Best 9205 Multimeter 💪🏻❤️
Thanks ✌️
grate man♥
Crative.
Super Video Sir
Good Idea
✋❤❤❤❤❤❤
سلام، داداش میشه در مورد بازدید کننده های اصلی کانالت که از کدوم کشور هستن و میزان درآمد کانال بگی؟ مثلا آر پی ام کانالت چقدره؟
very nice
and very good
✋❤❤❤❤❤❤
Very nice
Good
✋❤❤❤❤❤❤
Nice
Good job sir, I am. Very appreciative from your work.
Keep it up 👍
✋❤❤❤❤❤❤
хорошо делаешь
✋❤❤❤❤❤❤
سلام من درست کردم نمیدونم چرا وقتی درایور رو وصل میکنم اولین ردیف از ال ای دی ها یک لحظه روشن میشه بعد میسوزه وقطع میشه
تمام مراحل رو مطابق این کلیپ ساختم
Super
✋❤❤❤❤❤❤
U now Need to wear sunglasses when light on
✋❤❤❤❤❤❤
Excellent bro
✋❤❤❤❤❤❤
سلام خسته نباشی خیلی خوب بود ممنون لذت بردیم ❤❤❤
✋❤❤❤❤❤❤
Sir in which city do you live
im from iran
and city
Excellent project 👍👍🙏🙏🔥🔥❤️❤️❤️
Thanks for watch.☺️
Highly dangerous project
✋❤❤❤❤❤❤
❤great job 😊
Thanks 😄
✋❤❤❤❤❤❤
Lights jali nhi hai us py marker mara hai
That's amazing
Very useful video friends
❤️🙏
✋❤❤❤❤❤❤
عالییییی
supeur video
How many ledd in 1 strip?
✋❤❤❤❤❤❤
Nice 🎉
Mobile detail mein batao mines plus thoda dhire dhire banakar tha ki ham log bhi banaa
Crative idea good
Thanks a lot
Отличная штука ещё бы плафончик какой нибудь от пыли и было бы вообще шикарно
✋❤❤❤❤❤❤
what is the width of the wire?
✋❤❤❤❤❤❤
Hello if Led smd If we cut 10 pieces, there will be a problem😊
✋❤❤❤❤❤❤
How ti make same circuit in flasher
Please make it as rechargeable
Einstein. 👏
Screen shot alag aur video alag. ...
✋❤❤❤❤❤❤
WARNING!!! this circuit is DANGEROUS! a serious shock is possible, even a FATAL shock
It is very irresponsible not to warn viewers
Every exposed circuit is dangerous, but why this in particular?
1. ANYONE TOUCHING THE STRIPS COULD BE SHOCKED
Z(2?
الحمدلله ماشاءالله الحمدلله
✋❤❤❤❤❤❤
As made it ,Sir would like to u that do we have use the same circuit board for a solar panel 3W 8.97v 3A or any changes to be done
ansforming 220v into LED brilliance? Consider me enlightened! This video makes DIY lighting look like a piece of cake
ایول بچه شهر
Akh bana ke dikhao
NO explantion, few details, no tips/hints/traps............very poor effort
سلطان کجایی دلتنگت بودیم ؟قهری با ما ویدئو نمیزاری
هامیم جان درگیر دانشگاه بودم ولی دیگه تمومه از این به بعد بیشتر هستم
به به پست جدید🎉
بلی ☺️☺️
✋❤❤❤❤❤❤
truly horrible construction
✋❤❤❤❤❤❤
so you are using FOUR diodes to make the bridge - that is not clear
do NOT twist the leads like that - very poor practise
Hi
*Horrific* unsafe practices here. You're responsible for all those who ignorantly copy you.
👑👑👑👑
👍
Fucking death trap.
😂😂
Non sono molti quelli che traducono i commenti!....
You are tired to live ?
pls be vegan animals also have lifes