What You Should Absolutely Never Do When You Iron on Wood

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 75

  • @debbieestes9746
    @debbieestes9746 2 ปีที่แล้ว +7

    I really should have watched this before I tried ironing on wood...made numerous mistakes that I probably would not have made if I had watched this first! Thanks for all the good info!

  • @valerie750
    @valerie750 ปีที่แล้ว

    I love your teaching style. You are so informative and I appreciate you sharing your knowledge. Thanks a bunch.

  • @nikkifritchie2701
    @nikkifritchie2701 ปีที่แล้ว +2

    is it possible to sublimate on HTV on wood. Here is what I want to do. I have a wood round that I have stained and I want to put a sublimated design for a nursery on it. However the stain is a red oak and it is a little dark, so I wondered if I could create an off set around the design and cut the offset from HTV and sublimate the design on it so it shows up?

  • @MLLatUtube
    @MLLatUtube 3 ปีที่แล้ว +4

    So is it better to use regular vinyl on wood projects?

  • @GDISinc
    @GDISinc ปีที่แล้ว +1

    Okay the heat is 300 how long do we need to apply the heat to the wood and do we need to preheat the wood? Thanks for the video!

  • @1beakin
    @1beakin ปีที่แล้ว

    Thanks again MGL, made a nice DTF sign for DIL, but put on iron on saying, I had painted it with White Chalk from FolkArt, so today I was upset when my letters would not stick. You answered the question. I had the adhered enough I am polycoating them later.

  • @karenhadden4980
    @karenhadden4980 3 ปีที่แล้ว +11

    To get rid of the blotchiness when staining your wood (especially plywood and select pine) put on a pre stain wood conditioner prior to staining.

    • @CristinaRiveraBeauty
      @CristinaRiveraBeauty 3 ปีที่แล้ว +3

      Great tip, thank you!

    • @solodreamy
      @solodreamy 3 ปีที่แล้ว +2

      What do you recommend for sealing it? I make signs and bookstands but I want to be able to seal the htv design on them to where they won't be affected by anything

  • @ashleymatson6381
    @ashleymatson6381 2 หลายเดือนก่อน

    If using a bamboo wood coaster or ceramic tile with htv do they need to be sealed first for protection against water from cup? If so should I seal before or after htv placement? Thank you!

  • @carolschafer4667
    @carolschafer4667 3 ปีที่แล้ว +6

    The Dollar Tree does have sanding blocks that are pretty good :)

    • @kawestley1965
      @kawestley1965 3 ปีที่แล้ว +2

      I strongly recommend a 160 grade to the sanding 220 it worth The money for a better quality sad paper. I've been working with wood cuting building sense a child lowes or home depot cand help you.

  • @HubbaColo
    @HubbaColo 3 ปีที่แล้ว +8

    Sandpaper was originally graded by how many rocks (grit) would fit on a square inch-so….the smaller the pieces, the more would fit. Imagine 1500 tiny pieces, and you’ll see why higher numbers result in smoother finish.

  • @carolineblanchette2860
    @carolineblanchette2860 2 ปีที่แล้ว +1

    Stupid question… if I have black heat transfer vinyl can I put my vinyl on wood first and then stain the wood after?

  • @cats4992
    @cats4992 2 ปีที่แล้ว +1

    Thank you for all your help! You give great details and will def help with my current project!!

  • @patriciamora2915
    @patriciamora2915 9 หลายเดือนก่อน

    Also I was wondering if you cutout words and make a stencil or you use a stencil with alphabets is there something you can use to stick stencil to wood to paint the letters on

  • @lori-jocarroll
    @lori-jocarroll 3 ปีที่แล้ว +2

    Totally thorough good information. Thank you Rachel.

  • @CristinaRiveraBeauty
    @CristinaRiveraBeauty 3 ปีที่แล้ว +1

    I have a mouse sander, will that work or should I go get a block sander like you have?

  • @carolschafer4667
    @carolschafer4667 3 ปีที่แล้ว +5

    I don't see the links to the how-to do wood iron on?

    • @HubbaColo
      @HubbaColo 3 ปีที่แล้ว

      Click the tiny down arrow right of the title of the video, this while your video is in small screen TH-cam rather than full screen.

  • @brookestruve2842
    @brookestruve2842 ปีที่แล้ว +1

    Where is the link to the video on you actually going through the process of sublimation on wood? I thought it was mentioned that it would be linked below?

    • @MakersGonnaLearn
      @MakersGonnaLearn  ปีที่แล้ว

      th-cam.com/video/aIJ70j5kmJE/w-d-xo.html
      makersgonnalearn.com/how-to-sublimate-on-wood/

  • @janetmenchyk9778
    @janetmenchyk9778 ปีที่แล้ว

    Can I iron on wood then poly coat to use vinyl? Or can I just paint then be able to use both?

  • @Mary-zy5ru
    @Mary-zy5ru 8 หลายเดือนก่อน

    I made a wood round with a 4th of July cow and I painted it with white bear house paint and it worked great. I should have let it dry a little longer but it worked great.

  • @Shelly35able
    @Shelly35able 2 ปีที่แล้ว +1

    I literally just did a lot of this! I cooked all of the paint on my round. I used my big heat press

  • @merlehendricks5486
    @merlehendricks5486 ปีที่แล้ว

    Do I use parchment paper?

  • @patriciamora2915
    @patriciamora2915 9 หลายเดือนก่อน

    I’m making a lazy Susan and I bought an already stain lazy Susan and I’m going to iron on words on it but I was wondering if I can put a clear coat of something over it that won’t make letters come off

  • @michelelee7977
    @michelelee7977 2 ปีที่แล้ว +2

    Why don’t you use permanent vinyl instead? I did it on two projects and it worked well.

  • @xoangelxoluvxo
    @xoangelxoluvxo 3 ปีที่แล้ว +1

    Thanks for the wonderful tips. 🎈💕

  • @sharonhill5246
    @sharonhill5246 3 ปีที่แล้ว +3

    That is my project for today. Paint wood rounds for Halloween door hangers!! You read my mind!!! 😂
    Thank you for the info!!!

  • @kathrynkalafsky7030
    @kathrynkalafsky7030 3 ปีที่แล้ว +4

    Do you need to seal htv when using on projects that will be used outdoors?

  • @cristinehobbs7744
    @cristinehobbs7744 2 ปีที่แล้ว

    Crissy. Very helpful and great information.

  • @kandypowell6133
    @kandypowell6133 ปีที่แล้ว

    thank you very helpful.

  • @verybusymum
    @verybusymum 2 ปีที่แล้ว

    What font is that on your t shirt please?

  • @LesleyChandlercrafts
    @LesleyChandlercrafts 2 ปีที่แล้ว

    This was a very informative tutorial. thanks so much!

  • @LeighAnnRuopp
    @LeighAnnRuopp ปีที่แล้ว

    Is it all Folk Art Paint that is an issue? I used the Folk Art chalk paint before trying to use HTV. I didn’t watch this first, and i failed miserably, however I was doing EVERYTHING you said not to do.

  • @LelouchxSuzakufan
    @LelouchxSuzakufan 3 ปีที่แล้ว

    I'm not the great at sanding. Would I be able to have it sanded at the store? I usually go to either Home Depot or Lowe's.

  • @jiffygizmopd8263
    @jiffygizmopd8263 3 ปีที่แล้ว

    Very helpful lesson on iron on wood. Thank you.

  • @jennlozeau
    @jennlozeau 2 ปีที่แล้ว

    Can u use heat transfer on polyurethane

  • @angielewis28
    @angielewis28 11 หลายเดือนก่อน

    Very helpful!

  • @Hija.De.Luna25
    @Hija.De.Luna25 11 หลายเดือนก่อน

    What if I mix cotton fibers into my paint? Imma test it on dollar tree stuff!

  • @dorothyslade489
    @dorothyslade489 2 ปีที่แล้ว +1

    Very interesting video I’ve learnt such a lot best video I’ve watched regarding iron
    Ing on wood

  • @dorothyslade489
    @dorothyslade489 2 ปีที่แล้ว

    Brilliant video best video by far

  • @Joanne-yl2sx
    @Joanne-yl2sx 3 ปีที่แล้ว

    Thanks Rachel. Miss seeing you ❤️

  • @smeg8557
    @smeg8557 10 หลายเดือนก่อน

    HI was wondering if you can help me? I tried using HTV on a wood sign but when I removed the backing it left little yellow marks on the wood, any idea why this would happen? Thank You!!

    • @ashleymatson6381
      @ashleymatson6381 2 หลายเดือนก่อน +1

      I had the same thing happen. I’m wondering if I didn’t let the paint dry enough even though I thought it was dry I didn’t wait but a couple hours

    • @smeg8557
      @smeg8557 2 หลายเดือนก่อน +1

      @@ashleymatson6381 I gave up on doing it. I just started using the decals. I might try it again. Maybe I didn’t let the paint dry also, I don’t think I did actually.

    • @ashleymatson6381
      @ashleymatson6381 2 หลายเดือนก่อน

      @@smeg8557 I’m going to try again this week and let the paint dry over night. I was also using my large heat press and not the mini so maybe between those things it will work? I don’t know! I just want my stuff to look nice so I’ll keep trying I guess haha

    • @smeg8557
      @smeg8557 2 หลายเดือนก่อน +1

      @@ashleymatson6381 do you know what I didn’t think of that? Also, my press is a 16 x 20 so it’s really big. Lol

    • @ashleymatson6381
      @ashleymatson6381 2 หลายเดือนก่อน

      @@smeg8557 so maybe that’s partly where we went wrong haha

  • @gypsypath1
    @gypsypath1 ปีที่แล้ว

    Has anyone tried latex paint (the type of paint you would use on walls and ceilings)?

  • @lilybecerra2035
    @lilybecerra2035 3 ปีที่แล้ว +1

    Ty !

  • @solodreamy
    @solodreamy 3 ปีที่แล้ว

    Can you please attach the links you said you would put below? Thank you in advance ☺️

    • @HubbaColo
      @HubbaColo 3 ปีที่แล้ว

      When you have TH-cam in small screen, look over to the right of the title block which is underneath the video. There’s a tiny arrow. Touch or click it, and you will see the attachments to which they refer.

    • @solodreamy
      @solodreamy 3 ปีที่แล้ว +2

      @@HubbaColo oh yeah I know I thought she said she had some videos to link. I just didn't see them attached 🥺. Thank you though ☺️

  • @kimmajor4301
    @kimmajor4301 2 ปีที่แล้ว

    Why use htv over using permanent vinyl??

  • @provisionsave.8188
    @provisionsave.8188 2 ปีที่แล้ว

    doesn't look like the links were added (I'm on a 32" screen so the "if you're on a small screen, do this" doesn't apply). Thanks for the video

  • @Joani161
    @Joani161 2 ปีที่แล้ว

    Thank you. Please one time with the sanding and good wood is enough.

  • @melissadavis4744
    @melissadavis4744 ปีที่แล้ว

    Can you use a regular Iron for and on the HTV TRANSFERS ?

  • @billijohenning5169
    @billijohenning5169 3 ปีที่แล้ว

    you didn't say what brand of paint not to use , the one on your table and its black cant make it out?

    • @madelynbrazeal9459
      @madelynbrazeal9459 2 ปีที่แล้ว

      The smaller one is Waverly, Ink. It's my favorite black.

  • @AndyMartin401
    @AndyMartin401 6 หลายเดือนก่อน +1

    Jesus Christ this woman can talk😢

  • @daleflaherty
    @daleflaherty ปีที่แล้ว

    Omg 😒😞