Im interested in purchasing one of these but I wanted to know if I could run it into a scarlet 2i2 3rd Gen or would I need to run it into an interface that I can bypass the preamps or should I just run it into a mixer? Thanks
Hi WarmAudio. Got a 2 questions about connections capabilities 1. Can I let all Inputs connected Mic x4 / Line x2 / Instrument ×2 ? 2. I got a stomp after a passive electric bass guitar that delivers 50ohms output. Which Input on WA273-EQ is better ? Best regards
Question, when I engage the phase button when using a single mic, the tone shift pretty drastically. Why is that? Should the tone only shift if there 2 mics and I flip phase on one of them? Love the unit by the way. EQs and pre are like butter.
Hey Nick! When waveforms are inverted (as with changing the phase or polarity) you will hear a difference in tone. When using the pol button on a mic you are changing the way the unit is perceiving the signal from the mic. Hearing this change on the WA-73 series is normal. Hope this helps!
I figured out a way around having to buy a stereo unit...you just make two passes. Pan the left side of the signal all the way to the left and record it, then come back, pan the right side of the signal all the way to the right, then record that. It works on individual stereo sounds as well as the whole song.. you won't be able to tell the difference, trust me
Only three EQ positions? Add please one more (the mid range needs one more knob) and you have a great mastering tool to go along with Warm audio bus compressor in a final chain of the mix.
Im interested in purchasing one of these but I wanted to know if I could run it into a scarlet 2i2 3rd Gen or would I need to run it into an interface that I can bypass the preamps or should I just run it into a mixer? Thanks
I have this same question 🙋🏼♀️
Yes you can!
@@ElBetoid99 thank you for the confirmation!! Appreciate it
Hi WarmAudio.
Got a 2 questions about connections capabilities
1. Can I let all Inputs connected Mic x4 / Line x2 / Instrument ×2 ?
2. I got a stomp after a passive electric bass guitar that delivers 50ohms output. Which Input on WA273-EQ is better ?
Best regards
make a four band eq please please
@Alonzo Gary show me
Can i use just eq on this without enganging preamp if i want to use another eq?
Question, when I engage the phase button when using a single mic, the tone shift pretty drastically. Why is that? Should the tone only shift if there 2 mics and I flip phase on one of them? Love the unit by the way. EQs and pre are like butter.
Hey Nick!
When waveforms are inverted (as with changing the phase or polarity) you will hear a difference in tone. When using the pol button on a mic you are changing the way the unit is perceiving the signal from the mic. Hearing this change on the WA-73 series is normal. Hope this helps!
@@WarmAudioOfficial very helpful!! Thank you so much!
Any difference between the single vs stereo rack
Only the amount of channels.
I figured out a way around having to buy a stereo unit...you just make two passes. Pan the left side of the signal all the way to the left and record it, then come back, pan the right side of the signal all the way to the right, then record that. It works on individual stereo sounds as well as the whole song.. you won't be able to tell the difference, trust me
Only three EQ positions? Add please one more (the mid range needs one more knob) and you have a great mastering tool to go along with Warm audio bus compressor in a final chain of the mix.