IKEA BUILT IN HACK | BESTA | BRIMNES | HANVIKEN
ฝัง
- เผยแพร่เมื่อ 12 ม.ค. 2024
- This DIY Hack has to be one of my favorites thus far! We used the Besta, Brimnes and Havnika to create a beautiful custom built in look. Follow along as I show you the full tutorial so you can see how we did it, all the products and tools are listed below. Thank you!
- PRODUCTS NEEDED-
BESTA: www.ikea.com/us/en/p/besta-fr...
BRIMNES: www.ikea.com/us/en/p/brimnes-...
HANVIKEN: www.ikea.com/us/en/p/hanviken...
HARDWARE: amzn.to/3tQPQK5
2X6X8: Home Depot - We purchased 4 pieces
2X10X8: Home Depot - We purchased 2 pieces
L BRACKETS: We purchased them at Home Depot
PAINT: Pure White by Sherman Williams
STAIN: Caramel Nougat by Behr
TRIM: Home Depot - Picked one out that was similar to the one we had already
QUARTER ROUND: Home Depot
CAULK AND SPACKLE: Home Depot
- TOOLS NEEDED -
DRILL
SCREWS: 21/2 and 3"
HAMMER
MULTI TOOL
MEASURING TAPE
PAINTERS TAPE
STUD FINDER
ORBITAL SANDER: 240 Grit
SANDING BLOCK: 320 Grit
- FOLLOW ME
INSTAGRAM: @jojo_bela_shares
TIKTOK: @jojobelashares
Business Inquires: jojobelas28@gmail.com
Some links may be affiliate links.
-THANK YOU
Thank you so much for watching and I hope you enjoyed!
Don't forget to subscribe and also leave any future video ideas you would like to see in the comments below.
This is fantastic. Hard work and prep pays off as seen some shockers.
Wow amazing job! 👌🏼
wow ❤
How did he secure the base of the Brimnes to the 2x6 frame? I bought them with the intent to hack like this and I feel like I made the wrong choice because it's not a solid flat bottom. I figured I would need trim to cover that gap like you did, but I just can't figure out the securing to the base frame!!
How wide is this?