Thanks for the videos. Maybe you could put restrictions on the joints, ie: Drive joints, Motion links, Enable Contact Sets.Just a some thing to think about..Joint limits worked pretty well.
Great tutorial Lars! Would you also have some ideas on constraining a door to a bend (or spline) track? As I understand it, the PinSlot only works along straight lines.
talking about joint limits would have been nice here too also the rotation joints were in the wrong place should have been on a corner not the middle. great video's keep up the good work.
Hi Gary Wilson Thank you for watching! Yes, you are totally right. I should have placed the joints on the corner. Happens when prep time is limited :-)
Man, when I saw how you made a join for the second wing pannel my jaw just dropped! What would I do without your hints? Stayed in the dark, I suppose. Great stuff. Maybe you could also make a tutorial in subject of making and connecting many gears like in a gearbox. That would be awesome. Many thanks for jour job and shering the knowledge.
Yes by using contact sets, I used them when modelling a geneva gear mechanism. Here's a video on the subject: th-cam.com/video/3tQzwNG6l0o/w-d-xo.html Also thanks Lars 👍
As Kettle said, with contact sets. In the case of this model you would need to be careful where you place the joints. If you use the points Lars did (right in the middle of the width of the door) and include contact sets, the doors would not be able to move (where two of them are connected together) because there would be interference. However, if you moved the joint to the corner, then there would be plenty of room for the door to revolve.
How can you apply the joint movement in animation tab from the timeline? Please help me I'm doing a console with a Bi-folding door. I want to publish it as a video showing how the Bi-fold door. works. Thanks
![NISAMANEE - TADA (ท้าดา) [ OFFICIAL MV ]](http://i.ytimg.com/vi/hcQHEPMmJpU/mqdefault.jpg)
Enjoyed learning about the pin slot. Thanks Lars.
You are so very welcome :-) Thank you for watching!
Thanks for the videos. Maybe you could put restrictions on the joints, ie: Drive joints, Motion links, Enable Contact Sets.Just a some thing to think about..Joint limits worked pretty well.
Thank you Daniel Herold
Yes, you are right. We need to dig deeper into joints at some point.
Best,
Lars
Thanks for the video. Great job like always. But my favorite kind of the stream are modeling of ... everything.
You are so very welcome :-) Thank you for watching!
Great tutorial Lars! Would you also have some ideas on constraining a door to a bend (or spline) track? As I understand it, the PinSlot only works along straight lines.
Hi bejoscha Thank you for watching!
You might want to look into contact sets...I have not done any videos on that yet...I need to get that done.
talking about joint limits would have been nice here too also the rotation joints were in the wrong place should have been on a corner not the middle. great video's keep up the good work.
Hi Gary Wilson Thank you for watching!
Yes, you are totally right. I should have placed the joints on the corner. Happens when prep time is limited :-)
So, I'm building a roller coaster... No just kidding. lol
Another great lesson! Now I know more about joints. Thanks Lars!
Thank you Hari Wiguna
Man, when I saw how you made a join for the second wing pannel my jaw just dropped! What would I do without your hints? Stayed in the dark, I suppose. Great stuff. Maybe you could also make a tutorial in subject of making and connecting many gears like in a gearbox. That would be awesome. Many thanks for jour job and shering the knowledge.
That is awesome to hear nobrief .Thank you for watching the videos
I will put the gearbox idea on the list
from where i can get this tshirt
I bought it from this guy
instagram.com/helical_fresh/
thank you verry verry much
Is it possible to prevent objects to going thru each other? Make movements more "life-like".
Yes by using contact sets, I used them when modelling a geneva gear mechanism. Here's a video on the subject: th-cam.com/video/3tQzwNG6l0o/w-d-xo.html
Also thanks Lars 👍
As Kettle said, with contact sets. In the case of this model you would need to be careful where you place the joints. If you use the points Lars did (right in the middle of the width of the door) and include contact sets, the doors would not be able to move (where two of them are connected together) because there would be interference. However, if you moved the joint to the corner, then there would be plenty of room for the door to revolve.
No, contact sets are not the answer to this. Simply applying proper joint limits will prevent this from happening.
How can you apply the joint movement in animation tab from the timeline? Please help me I'm doing a console with a Bi-folding door. I want to publish it as a video showing how the Bi-fold door. works. Thanks
Check out the motion study found in the Assemble dropdown
@@cadcamstuff Thank you. And to save as a video file I need to render it right?
Can you do just a simple door.
Hi Humberto Coria Thank you for watching!
That is a great idea. I have put it on the list
I started getting worried when you said that you were going to talk about joints. 🚬
Nothing to worry about...It is all cooooooool dude :-)
Lars Christensen I'm looking forward to today's steam. It's just a shame that I can never catch them live due to the time difference. 🕐🕚🕑🕛