How to set display controller for load cell/force sensor
ฝัง
- เผยแพร่เมื่อ 17 มี.ค. 2019
- The video shows the connection and setting of the s type load cell with indicator.
Buy ATO load cell online: www.ato.com/load-cell
Note: The weight of the calibration weight should be 50%~100% of the sensor's range weight. - วิทยาศาสตร์และเทคโนโลยี
Thanks
Dear sir / madam,
Is it possible to use 1 loadcell on 3 indicators? This is to have set every indicator on a specific weight.
Many thanks in advance for the help and reply!
Kind regards,
Can i make a external tare button with this such as LM8-RRD ?
Hi, I'm looking for weighing instrument that can display the max value for variable weigh. Is this product able to do that?
Yes
Does it come with cables to connect to a power source?
Hi, do you know how much is the maximum weight that this device can display? I have a 5 Ton force sensor.
It can display: -19999~99999
Hi! Could you tell me the procedures for obtaining the peak and maximum values?
I have this same model but I can only make these video settings and thank you because the manual for this device is unfortunately in Chinese. Do you have his manual in English? And thanks for the attention and explanation in the video. Greetings from Brazil!
Please contact our after-sales staff via email and provide the order number you purchased at ATO. We will send you the English version of the instructions. We apologize for the difficulties you have encountered.
Please contact us according to the page email address, www.ato.com/contactus
@@ATOcom Hello. Sorry but the device I use is from the company I work for and unfortunately I don't have the order number. They probably didn't buy it from you, but could you still provide me with the manual for this device in English? Or just tell me how to set up Peak and Valley?
Thank you for your attention.
@@SuperLincoln13 Note the code “AHH” Detect threshold value of peak value, If the weight exceeds the set value, it will be displayed in "PEAK".
press "^" to display “PEAK”.
The Valley code is "ALL".
@@ATOcom Thank you so Much! God bless you!
can it be joined to analog input plc. for analog singal triggers 0-10v
Sorry, can't
Dear, could you tell me how to activate zero button, I activate the device to be zero when it power on.
great video may i ask where you got the power supply from please?
The display is powered by 100~240VAC, and the load cell is powered by the display EX+ & EX-.
@@ATOcom ty!!!
Dear sir, i have 200 kg load cell, can we connect the amplifier directly to this weight meter?
The load cell can be directly connected to this meter without an amplifier.
Thank you for your video. I have a big problem. When the weight is up to 200 Kg the display indicate ‘OL’
I don’t know how, the load cell is 500 Kg but I can’t reach up to 200 Kg….
Please help me I’m desperate!
Thank you in advance for your reply!
Is your equipment purchased at ATO? You can contact our after-sales team by email and submit your order number and problem description. www.ato.com/contactus
If you buy from other manufacturers, it is recommended that you pay attention to these points: upper limit value, display unit, sensor excitation wiring, and whether the sensor is in good condition.
Hi,
Where can I find the manual? I would very much like to read the manual before considering buying this product.
Thank you
www.ato.com/Content/doc/ato-ddc5-chb-digital-controller-instruction-manual.pdf
hello. I would need to control the alarm time (out1 and out2) I would only need a pulse of 1 second maximum. Can you do this display? thanks greetings
Its alarm output time cannot be controlled, it is just a normally closed or normally open switch, you can use this output to control other components with pulse output function.
I have 500kn universal testing machine ,shimadzu.They use pressure load cell.can i use your display.?
It can be matched with a 500kN sensor, but its display digits are only 5 digits.
Do you civit force transfer verification machine?
No.
How can we connect 4 load cells in one display controller unit and get different readings from all of them????
Sorry, we don't have this type of display controller.
how to make load cell display 5 digits after comma?
Where i can buy cellulare and display?
www.ato.com/5-digit-display-controller-for-pressure-sensor
can you mail me the pdf with all setings pls
how to configure to connect 4 load cell
Maybe you need this, www.ato.com/load-cell-junction-box
What name display controler sir?
Can i put start stop button?
you can control power put a button.
can anyone supply directions for changing units. mode for me only sets alarms. All directions in Chinese
Please contact our after-sales service, describe the problem you encountered and provide your order number. www.ato.com/contactus
Can i use Load cell during machining in CNC MILLING for tool wear monitoring
Unable to achieve, sorry.
How we can purchase it
This link, www.ato.com/5-digit-display-controller-for-pressure-sensor
Every time I try to calibrate it shows error 1, how can I fix
Please contact our after-sales team and provide your order number and picture. www.ato.com/contactus
شفتهمنا؟
i install it and it shows negative value
Exchange the position of the excitation line, EXC+ & EXC-.
Price of me please
Price link, www.ato.com/5-digit-display-controller-for-pressure-sensor