Thank you so much for the tutorial this cleared up a lot of confusion. I did have one question though. The nature of the DHCP connection creates an issue where I cannot define the Src and Dst addresses accurately because they will change from time to time. Is there a workaround for this? Is there a way to tailor this to apply to packets going through specific ports on the mikrotik instead of by address?
Sir tutorial for step by step setup on IPOE usually large ISP providers uses IPOE setup cause it lighter than PpPoE and almost half of the client higher capacity can be carried out in a mikrotik compare to pppoe. Thank you...
شكرا كثير أستاذ ماهر حداد على مجهودك الرائع ،عندي سؤال هل ممكن أستخدم نفس رولات المانجل بس أخليه للكل يعني بدل ما احدد اي بي واحد أسوي اي بي رنج الشبكة كامل
ISPs usually have lots of customers, it would be too much time consuming to do this for each customer. How can we apply this method on multiple customers using DHCP
I have 300Mbps, and on testing after the rule the speed isn't capped what could I be doing wrong, I can see traffic counting but does'nt show all traffic, on the interfaces you can see it going to 300 but in the queue it's still kbps
I know this is a late comment but Is it possible to assign port numbers in your exisiting firewall mangle rule? I tried to put the destination port in prerouting including my source network address but everytime I try to speedtest my connection. It didn't follow the bandwidth I set in my queue tree rule. I hope you can give an example on how to add port numbers. My goal is to prioritize some applications with specific port numbers using Queue Tree. I saw your other videos that tackles "Prioritization" but on those videos it only shows the Simple Queue QOS. I hope you can teach us about Queue tree more.
![บุษบา - วงชานเมือง [LiveCoverVertion] Original : เมนทอล](http://i.ytimg.com/vi/Dm81sKcd9rs/mqdefault.jpg)
Thanks a lot. This video helped me implement queue tree in my mikrotik AX2 and it works like a charm. Keep up the good work.
Excellent video!
nice sir, thanks for the info
Dankie Maher!
Shukran!
Dear Sir, Please Make Tutorial For large user (1000-2000 User) for Perfect Bandwidth Management Simple Queue+ Queue Tree
th-cam.com/video/qQYnUJwKSqo/w-d-xo.html
Great great great thanks for the information.
Glad it was helpful!
good job
Thank you for your content, can you please assist with a video on how to mesh 2+ Mikrotik routers with one SSID ?
Thank you so much for the tutorial this cleared up a lot of confusion. I did have one question though. The nature of the DHCP connection creates an issue where I cannot define the Src and Dst addresses accurately because they will change from time to time. Is there a workaround for this? Is there a way to tailor this to apply to packets going through specific ports on the mikrotik instead of by address?
qos can only be set on the router, I can't set it on the ap as well?
Sir tutorial for step by step setup on IPOE usually large ISP providers uses IPOE setup cause it lighter than PpPoE and almost half of the client higher capacity can be carried out in a mikrotik compare to pppoe. Thank you...
شكرا كثير أستاذ ماهر حداد على مجهودك الرائع ،عندي سؤال هل ممكن أستخدم نفس رولات المانجل بس أخليه للكل يعني بدل ما احدد اي بي واحد أسوي اي بي رنج الشبكة كامل
Question: How do you prioritize some ports using it sir?
ISPs usually have lots of customers, it would be too much time consuming to do this for each customer. How can we apply this method on multiple customers using DHCP
I have 300Mbps, and on testing after the rule the speed isn't capped what could I be doing wrong, I can see traffic counting but does'nt show all traffic, on the interfaces you can see it going to 300 but in the queue it's still kbps
Same here. I don't know what the problem is, maybe because the DHCP server is not in MT router....
Sir some mobile not come hotspot login page. Soloution please
I know this is a late comment but Is it possible to assign port numbers in your exisiting firewall mangle rule? I tried to put the destination port in prerouting including my source network address but everytime I try to speedtest my connection. It didn't follow the bandwidth I set in my queue tree rule. I hope you can give an example on how to add port numbers. My goal is to prioritize some applications with specific port numbers using Queue Tree. I saw your other videos that tackles "Prioritization" but on those videos it only shows the Simple Queue QOS. I hope you can teach us about Queue tree more.
mynetworktraining.com
Resources is too high in this type of qos....
followed step by step and it didn't work... no I'm not using fast track.
Same here. Download works only. Upload doesn't.