I did everything accordingly and tighten up the gold fx blade and the andis t outliner tension screw but Even after I oiled them they seem to be pulling the hair and when I pinch the blade with my thumb they tend to stop moving or slowing down
Cutting that extra plastic around the blade is a must if you wish to modify your blade with no complications. I just cut off all that plastic and the tension screw and zeroing was 1000x easier than before. Thanks for the vid.
Makes sense. I've learned this from experience. In fact when you loosen tension to much you get hair pulling. What is the best way to adjust trimmers when on side seems to hit tighter? I find this problem with many andis out of the box.
Hey man, I have same T-Outliners. But my screw on the blades are stuck and they are not coming out? What can I do take out the blade? I wanted to replace it
Yes. Loosen the tension screw 1/4”.. the turn your trimmer on …if it’s loud, tighten the screw 1/8in. It takes time to manipulate the tension if this is your 1st time. Test it on your arm to make sure it’s not pinching or cutting you. Good Luck
I find that to be a problem with 80% of instructional/how to videos on TH-cam. Like if someone is watching this most of the time they already know the basics, they don't need you to explain the difference between top and bottom blade and what they're for. Ugh
Yeah,and at the same time,you get peeps making comments like...."you left this out,you left that out." "you forgot to mention this...and that..." But i agree with ya though,but some retards need things to be overly explained to them...lol
I did everything accordingly and tighten up the gold fx blade and the andis t outliner tension screw but Even after I oiled them they seem to be pulling the hair and when I pinch the blade with my thumb they tend to stop moving or slowing down
Great video - What tool did you use to cut the plastic over the top of the trimmer? A dremel tool?
Cutting that extra plastic around the blade is a must if you wish to modify your blade with no complications. I just cut off all that plastic and the tension screw and zeroing was 1000x easier than before. Thanks for the vid.
i don't know who told him that ring looks good on his thumb
It’s called a iRing
Makes sense. I've learned this from experience. In fact when you loosen tension to much you get hair pulling. What is the best way to adjust trimmers when on side seems to hit tighter? I find this problem with many andis out of the box.
Very detailed. Loved it! 💪🏾😎
Hey man, I have same T-Outliners. But my screw on the blades are stuck and they are not coming out? What can I do take out the blade? I wanted to replace it
Any solution yet?
Them clippers be hittin' now bruh! ✂️
do I have to adjust tension bar after zero gapping????
Yes. Loosen the tension screw 1/4”.. the turn your trimmer on …if it’s loud, tighten the screw 1/8in. It takes time to manipulate the tension if this is your 1st time. Test it on your arm to make sure it’s not pinching or cutting you. Good Luck
I bought these a while ago but the screws are tight asf and I cant modify it
Tension bar will travel in the path of least resistance w/o a controller which is the purpose of the screw.. the screw is to keep the bar in check..
Great video bro.
Man, adjust the dam screw 😂😂
What is this, rocket surgery
Uh I don't think that's possible
My question is, why do you have to cut the clipper open?
Why can't you use it just like that?
Hügo Nwa helps it run cooler longer
Also helps w/ when you’re angling your clipper
They say a man that wears a ring on his thumb is gay. Random 😂😂😂
Time that I will never get back, the rest of my life. Learned nothing.
Still searching for a helpful video on adjusting the tension. Click bait 😂😂😂😂😂
you over explain thangs
BeautyofScent but do you understand it?
I find that to be a problem with 80% of instructional/how to videos on TH-cam. Like if someone is watching this most of the time they already know the basics, they don't need you to explain the difference between top and bottom blade and what they're for. Ugh
Yeah,and at the same time,you get peeps making comments like...."you left this out,you left that out."
"you forgot to mention this...and that..."
But i agree with ya though,but some retards need things to be overly
explained to them...lol
😴😴😴😴