The castle, colosseum, haunted house... each time you make one of these epic projects, I think there's no way you can exceed what you've already done, and each time I'm blown away. This is just incredible - the base, the lighting and effects, the attention to detail including all the little flags blowing in the wind. Wow!
Amazing work John. Good job on finding the perfect use for the OJ lid! The pencils for the banister on the bow of the ship is perfect. The Dragons head by Sam is lovely work... The colours of the whole ship are beautiful man, and I love the way you really took your time with the highlights etc Too many details in this for me to mention. Inspiring work. Phenomenal build !
Amazing work, you have taken tabletop terrain to a whole nother level!!! I have tried to convince my DM that my party should get an airship. Maby if i show the DM the video he will shange his mind and realise it is super cool!
Lmao!!! When you hyped this up as 'your most epic' I thought yeah yeah cuz you have made so MANY mind-blowing projects.... Well, you were right!! Congrats! Hands down the 2nd coolest craft project I have seen... #1 was a ship full of skeleton minis and looked skeletal in design. ( most of took 500 hours to make and atleast that much in materials!)
Awwwyeaaah! After this it's time to make floating chunks of land with towers and forts on them, maybe a floating lighthouse or another ship to do boarding actions and broadsides? I think you just opened up about a half a years worth of future content.
Can I give you a pro model making tip when working in foam like this? The templates that you made, print out twice as many in a thin card stock. laser cut them, print and stick and free hand, whatever. When you have your material in cube form, attach the templates to either side of the cube, either double sided tape, pins or blue tac works fine, depending on the size of the template and depth of the cut. If it is an asymmetrical shape (like the curve of your bow) then put the big template on the bottom and the small on the top. Pull the piece up hard against the wire, the templates will prevent the cut from going deeper than it should if you pull it through in decent time. I always make my templates with a bit of extra, like a tab as a guide, on the beginning to guide the hot wire into the right place before it touches the foam, it gives you those few precious seconds to readjust or back out if something isn't aligned properly. I use this technique because a bit of templating up front with the lovely, perfectly smooth finish that you get from the hot wire means that there is no finishing work to be done. You get the cut that you want, where you want it with a perfect finish, first time, every time. Also, keep the bits that you cut off and reform the original "cube" double sided tape is your friend here, but pinning is sometimes a necessary evil. You now have a flat surface to stick more templates on that are cut from different angles. This is how I do compound curves like the bow of your boat. I think it's worth spending the extra 10 minutes getting the guide right to save you potentially hours of sanding, patching and adjusting to get an almost but not quite right end result. Myself, I'd rather get exactly what I want first try by spending a little bit more time on the template than doing the laborious work of trying to patch up "mistakes" and ending up with an inferior end result.
That's certainly one way to do it. Basically it's like any pillar jig for the proxxon. I've used this method before. The thing with the hull is that it is being covered in foam "timbers" and my method worked for me in about 15 minutes it was done. If I was to carve the boards directly into the hull then I would have used your method. Great tip!
@@TabletopWitchCRAFT I'm a bit spoilt because I primarily use my laser cutter to make the templates. I used to go from my sketches to freehand templates like you are doing here but I found what I lost on the swings I made up on the roundabouts when it came to templating. One of my product lines is jigs so I guess I'm a bit biased. My philosophy is "computer good at French curve and straight line, monkey good at nature" my workflow is; - Sketch and see if I can get something workable. Symmetrical stuff is folded so you only need to draw half. Then, I digitize it regardless. I used to skip the digital step if I had something workable but I found it was holding my business model back. - Fusion/ solidworks/ illustrator/ whatever CAD program, slice it to create templates. - Laser cut then use the laser cut jigs straight as templates. - Weathering etc, freehand, rub with rocks for texture, wire brush for planks etc etc. Of course your end result is fantastic, I just thought I'd share my process. Subscribed and liked :)
April 05, 2023 Wen. I've been enjoying your builds, content and awesome works for about a year now. Being a artist of "sleftthought cosplay, comic book characters, storytelling tattoo design and etc." I'll now say that this "Might Airship" is now my most favorite of your works! I don't have people in my area that I can connect with for those areas of building that I don't know, I've tried a person or two from other states but they used me while not getting any of my projects or money's back. I'll never give up and I build on, just hoping that I'll some day soon meet the real people that will truly help me so I too will become one of the greats like yourself... Keep up the awesome work!!!
Hi Watt, thank you for your support and following me for all this time. I'm happy you really enjoyed this video! It's too bad what happened to you after you reached out to this community, but hang in there. Keep on crafting and enjoying what you do!
John, You have outdone yourself! Each build, I have regarded as "most epic yet", but I have got to say - this is incredible! You are a MASTER! Blown away! I have no adequate words to describe my jaw dropping awe for you and your builds! Thank you!
W. T. F! I have no words! Your players are really really lucky to have you as their DM, this is another level of going above and beyond. Congratulations on all the talent and all!!!
Fantastic work as always! I like how you've made it a family affairs, you got your daughter and mom helping out on it; thats the best. Its not just a craft but now its also a great memory. I struggle to get my kids to do crafting: a recent Gecko diorama for my 2nd grader was like pulling teeth at a few points, he just wasnt into it. The ship is very inspiring, great timing with CR airship shenanigans! I've made a couple small boats and this one gives me some really great ideas on doing one on this scale. One issue I foresee is the PCs inevitable tactic of ramming things, so maybe making a trireme style ram that could mount via the front weapons mount would be possible? I really like the drone-style fans, I think you could leave those on, or maybe they could be purchasable add-ons? like boosters or something? or add paddle/wings that you see on some sky ships for those spots. fantastic work, really gets my mind working on ways to create something like it. keep up the good work!
Well, that IS epic. Well done sir! Very cool stuff. Lots of things to take away from that if someone wants to make it, or something similar. Very cool!
@Tabletop WitchCRAFT He just inked it. It's off a photo of a character from Night of the Living Dead. Had he continued, I was going to have him do something original. His mini skills are incomparable though!
John, I do believe you have outdone yourself on this build. The ship is beyond epic and I am not sure there are words that even describe this video. I am super excitement to tackle building this. I truly love the way you have incorporated other pieces from previous videos in to this and how they are interchangeable. Phenomenal color scheme and amazing build!!
Wow, this one gave me goosebumps! remembering growing up watching Studio Ghibli films…brilliant work, your ideas and execution are always a step ahead from the rest….loved it. ❤
OK, sensei, it seems to me that there were a lot of small projects combining into this totally bad ass build. If I could use the metaphor of many instruments in a symphony coming together to create a Beethoven level composition. I am astonied, in other words, surprised at it’s awesomeness. -Rick
Absolutely brilliant details and wow look at all the exquisitely beautiful colours/ shadeing/ highlights and must say the your design is breathtakingly epic your are a master craftsman with all your creations 💕💕💕💕💕 so Congratulations 🎉👏🎉🎉🎉 we love your Airship love from Tara Maria Travis/Tara Howarth 💕😘😘
En tant que joueur kharadron, et amateur de bateaux /îles volants en tout genre, j'adore ce build. C'est excellent, c'est modulaire, c'est plein de gadgets, c'est brillant ❤
Wonderful job. Also, the fact that Noble Knight Games is sending you things to work with is just making me want to shop there even more... and I'm a regular. I've put in two orders this week already!!
@Tabletop WitchCRAFT now I'm hoping for a little series I can totally see like just small upgrade builds like a giant chain balista that can wrap around a dragon or a wyvern and pull them close or a dragon or wyvern hunter air ship just the possibility 😅sorry just really amazing I'm sure ur player are gonna do some pretty amazing things in ur campaign with that just make sure they don't shoot eachother out if a catapult
My heart stopped when the ship tipped over. Absolutely beautiful build man. Now all you need are some enemies to blow off those cannons and a dragon that thinks it's cool to strap those cannons to it's. Never seen a cannon dragon before 🤔
I cant even begin to describe the level of awe inspiring, jaw dropping epic next level WOW that does justice to that masterpiece. I am just going to pick my jaw up from the basement and try and step up my game.
Going to have to replace those cannons with ballistae but challenge accepted! The design is so impressive. You have become Neo with foam! Great job, John!
The castle, colosseum, haunted house... each time you make one of these epic projects, I think there's no way you can exceed what you've already done, and each time I'm blown away. This is just incredible - the base, the lighting and effects, the attention to detail including all the little flags blowing in the wind. Wow!
Thank you Kyla, I really appreciate that. I love the details... it's where time slows for me on each craft!
*_Next Level stuff, none of that "cheap and quick" silliness all the other terrain channels have._*
Thank you! A lot of time and planning here. I certainly enjoyed every minute of it!
Insane… no other word fits here… just insane … WOW😮
Thank you so much Sebastian!!
Fantastical technology at its finest!!
Thank you!
I really wish there was a wow button on TH-cam!!!
Thank you Em :) !
Amazing work John. Good job on finding the perfect use for the OJ lid! The pencils for the banister on the bow of the ship is perfect. The Dragons head by Sam is lovely work... The colours of the whole ship are beautiful man, and I love the way you really took your time with the highlights etc Too many details in this for me to mention. Inspiring work. Phenomenal build !
Thank you so much. Really was a fun build, had its challenges but that's part of the fun! We need to work on a project together next !
@@TabletopWitchCRAFT Would love to mate! You've got my number ;)
The only thing that would make this better would be Dafydd coming up with a way to make it levitate on its own. class project my friend. Nice work.
He’s more than welcome to try haha
I’m speachless!! This is over the “inspiring” and “epic” level my friend! Thanks for sharing this. 🤯🤘🏻🍻🤩
Glad you enjoyed it! I really appreciate it! On to the next craft :)
Nice to see you back!!!
Thank you!! More in the next few weeks in a row!
This is a very impressive build. I'm amazed that it took you "only" 100 hours - I would probably have been double that.
Thank you Ryan!!
You are right about leds also. A couple. Of flickering or flashing leds can really add life and movement to an otherwise static piece of terrain.
Definitely!
Not enough ships are done let alone epic airships! There isnt a piece of this airship I dont love. This is magnificent! Well done!
Thank you 🙏!!
Amazing work, you have taken tabletop terrain to a whole nother level!!! I have tried to convince my DM that my party should get an airship. Maby if i show the DM the video he will shange his mind and realise it is super cool!
I like to push things to the limit! (Enter 80s montage haha). Oh yeah show him the video!! Thank you :)
Great build. I need to make this for my son's Spelljammer campaign.
Oh yeah for sure !!! Thank you.
This is hands down the best tabletop craft I’ve ever seen
Right on !!! Thank you so much!
That is epic alright, your players are going to love it.
Thank you Brad!!
Woah another epic build by a very talented artist! Amazing!
Thank you so much !!
Dude, I'm gonna keep saying that every time. You are underrated. Amazing build my man.
I really appreciate that, and your support! The channel grows :)
@@TabletopWitchCRAFT and I'm sure it will continue to do so. My only wish is that I could be one of those players
Oh wow. Completely speechless. This is amazing.
Thank you so much!!
John!! Thank you FOR this labor of Love.
You're welcome Shon, thank you for watching !
Seeing Sam Lenz and Noble Knight get some love is awesome. Especially when Noble Knight is a local store for me.
Both amazing for sure! Let Noble Knight know you saw the video!
Great job! FYI if you iron wax paper on the back of fabric you can run it through most printers👍
Hmmm interesting thank you!
Wow, man. You've really outdone yourself with this one! Absolutely incredible what you're able to do with your talents and vision!
Thank you so much! It is nice to see my vision a reality!
@@TabletopWitchCRAFT Trust me, it was nice for me to see as well! ;)
Keep making cool stuff!!!
Outstanding project! You did a great job, and Sam Lenz is a great painter
Thank you Elric!!
Lmao!!! When you hyped this up as 'your most epic' I thought yeah yeah cuz you have made so MANY mind-blowing projects.... Well, you were right!! Congrats! Hands down the 2nd coolest craft project I have seen... #1 was a ship full of skeleton minis and looked skeletal in design. ( most of took 500 hours to make and atleast that much in materials!)
Well I'm glad I didn't disappoint Eric :) I've seen that ship... it's amazing!
Awwwyeaaah! After this it's time to make floating chunks of land with towers and forts on them, maybe a floating lighthouse or another ship to do boarding actions and broadsides? I think you just opened up about a half a years worth of future content.
Some great ideas, and I think you're right !!
... as someone who's currently doing a space pirate army *I have a mighty need*
Awesome, perfect timing !!
i dl that dragon stl and i never did anything with it . this is genius . also i have used orange juice caps as my bards stage in the tavern
It’s a great sculpt…. And that’s an awesome use for those caps!
I hate that I can't hit "like" a thousand times. What an absolutely AMAZING build!!! Bravo!
Well I appreciate the support and you following the channel!!
Excellent work as always John. Thanks for an awesome collaboration on the mountain lightening AND on the two led pods on the ship!
Dafydd you help bring the immersion to a whole new level!
That is truly a work of art! I'm completely blown away by it and it was definitely worth the wait.
Thank you so much Lynne :) !!
Completely impressed wish I were that good
Thank you :)
Oh thank you to all the players involved, because you shared that you didn’t do this all alone. Thank you to the crafting players involved
Can I give you a pro model making tip when working in foam like this?
The templates that you made, print out twice as many in a thin card stock. laser cut them, print and stick and free hand, whatever.
When you have your material in cube form, attach the templates to either side of the cube, either double sided tape, pins or blue tac works fine, depending on the size of the template and depth of the cut.
If it is an asymmetrical shape (like the curve of your bow) then put the big template on the bottom and the small on the top. Pull the piece up hard against the wire, the templates will prevent the cut from going deeper than it should if you pull it through in decent time.
I always make my templates with a bit of extra, like a tab as a guide, on the beginning to guide the hot wire into the right place before it touches the foam, it gives you those few precious seconds to readjust or back out if something isn't aligned properly.
I use this technique because a bit of templating up front with the lovely, perfectly smooth finish that you get from the hot wire means that there is no finishing work to be done. You get the cut that you want, where you want it with a perfect finish, first time, every time.
Also, keep the bits that you cut off and reform the original "cube" double sided tape is your friend here, but pinning is sometimes a necessary evil. You now have a flat surface to stick more templates on that are cut from different angles. This is how I do compound curves like the bow of your boat.
I think it's worth spending the extra 10 minutes getting the guide right to save you potentially hours of sanding, patching and adjusting to get an almost but not quite right end result. Myself, I'd rather get exactly what I want first try by spending a little bit more time on the template than doing the laborious work of trying to patch up "mistakes" and ending up with an inferior end result.
That's certainly one way to do it. Basically it's like any pillar jig for the proxxon. I've used this method before. The thing with the hull is that it is being covered in foam "timbers" and my method worked for me in about 15 minutes it was done. If I was to carve the boards directly into the hull then I would have used your method. Great tip!
@@TabletopWitchCRAFT I'm a bit spoilt because I primarily use my laser cutter to make the templates. I used to go from my sketches to freehand templates like you are doing here but I found what I lost on the swings I made up on the roundabouts when it came to templating.
One of my product lines is jigs so I guess I'm a bit biased.
My philosophy is "computer good at French curve and straight line, monkey good at nature"
my workflow is;
- Sketch and see if I can get something workable. Symmetrical stuff is folded so you only need to draw half. Then, I digitize it regardless. I used to skip the digital step if I had something workable but I found it was holding my business model back.
- Fusion/ solidworks/ illustrator/ whatever CAD program, slice it to create templates.
- Laser cut then use the laser cut jigs straight as templates.
- Weathering etc, freehand, rub with rocks for texture, wire brush for planks etc etc.
Of course your end result is fantastic, I just thought I'd share my process. Subscribed and liked :)
Awesome craft John 👍👍👍 I am in awe!! 32:28
Thank you Gary :) !
@@TabletopWitchCRAFT do you stream any of your D&D games?
@@garyosler4818 No, but I’m thinking of posting heavily my adventure in Strahd. I just started it on Instagram!
April 05, 2023 Wen.
I've been enjoying your builds, content and awesome works for about a year now.
Being a artist of "sleftthought cosplay, comic book characters, storytelling tattoo design and etc." I'll now say that this "Might Airship" is now my most favorite of your works!
I don't have people in my area that I can connect with for those areas of building that I don't know, I've tried a person or two from other states but they used me while not getting any of my projects or money's back.
I'll never give up and I build on, just hoping that I'll some day soon meet the real people that will truly help me so I too will become one of the greats like yourself...
Keep up the awesome work!!!
Hi Watt, thank you for your support and following me for all this time. I'm happy you really enjoyed this video! It's too bad what happened to you after you reached out to this community, but hang in there. Keep on crafting and enjoying what you do!
John, You have outdone yourself! Each build, I have regarded as "most epic yet", but I have got to say - this is incredible! You are a MASTER! Blown away! I have no adequate words to describe my jaw dropping awe for you and your builds! Thank you!
So nice of you Lance. I really appreciate that!!!
Dude. Looks fantastic!
Thank you !!!
A work of art and the smoke adds a "next level" feel to it.
Right on!!
Epic doesn’t even come close to describing how amazingly awesome this build is!!!!!! I love everything about it!!!
Thank you so much !!!
One word...WOW! Love watching you share your expertise and skill in an interesting and fun way 😃
Thank you Amanda :)
W. T. F! I have no words! Your players are really really lucky to have you as their DM, this is another level of going above and beyond. Congratulations on all the talent and all!!!
Thank you Claudia :)
Absolutely stunning work as always! We're proud to have had a small hand in its creation. Keep up the good work!
I'm happy you like the final build, and thank you for your support of my channel!
This is farout the best craft I've ever seen !!! what a detail , what a design ! congrats ! love every piece of it !!!
Tine, I appreciate that so much!!! A lot went into this.... design, planning, crafting, coordinating, coffee :) I'm so happy you enjoyed the video!
Very cool. Love it John
Thank you, very happy to hear it !!
Damn that looks good! The playability and attention to detail is fantastic.
Right on Greg... I love the modularity of the craft! Who doesn't like to upgrade things?!!!
Knocked it out of the park again! Love all your collaborators work, and the table with Paladin was mind-blowing!
Thank so much! It was a fun group to work with for sure... and that table... EPIC for real!
Fantastic work as always! I like how you've made it a family affairs, you got your daughter and mom helping out on it; thats the best. Its not just a craft but now its also a great memory. I struggle to get my kids to do crafting: a recent Gecko diorama for my 2nd grader was like pulling teeth at a few points, he just wasnt into it. The ship is very inspiring, great timing with CR airship shenanigans! I've made a couple small boats and this one gives me some really great ideas on doing one on this scale. One issue I foresee is the PCs inevitable tactic of ramming things, so maybe making a trireme style ram that could mount via the front weapons mount would be possible? I really like the drone-style fans, I think you could leave those on, or maybe they could be purchasable add-ons? like boosters or something? or add paddle/wings that you see on some sky ships for those spots. fantastic work, really gets my mind working on ways to create something like it. keep up the good work!
Thank you so much for sharing all of that Clay. Some great ideas you have given me as well. My daughter loves crafting... my son... not so much haha.
Well, that IS epic. Well done sir! Very cool stuff. Lots of things to take away from that if someone wants to make it, or something similar. Very cool!
Thank you Perry !!!
Very cool airship!! Epic!!
Thank you Gordon!
That is super cool. Just gorgeous. Nice work
Thank you!!
Damn nice, Bro. I spent weeks on mine and yours is SOOOO much better. I feel a little better knowing you put over 100 hours into it though.
Your group should be proud to have a friend to make one for them!!! Thank you Luke!
Absolutely EPIC!!! I didn't want to have an airship in my games until now. Well done!!!
Right on, thank you!! Gotta have that airship haha.
Beautiful build! I have been wanting to make my own airship for some time. This is very inspirational. Awesome execution!
Thank you ! I'm happy to hear this video has inspired you !
I don’t know how you come up with these things, but I’m damn glad you do!
I'm glad you enjoyed it Bobby, thanks for watching.
Beautiful airship! Collaborating with Sam is always an excellent idea. He did one of my tattoos, many years ago.
Oh wow, that's awesome... did he just design it or do it as well?
@Tabletop WitchCRAFT He just inked it. It's off a photo of a character from Night of the Living Dead. Had he continued, I was going to have him do something original. His mini skills are incomparable though!
The build is beautiful. I love the lighting and the modularity.
Thank you !
Wow amazing ship
Thank you!!
This is awesome. You're work is always impeccable.
Thank you Jeannine!
John, I do believe you have outdone yourself on this build. The ship is beyond epic and I am not sure there are words that even describe this video. I am super excitement to tackle building this. I truly love the way you have incorporated other pieces from previous videos in to this and how they are interchangeable. Phenomenal color scheme and amazing build!!
Thank you so much for that Scott! I’m happy to see it when people find older builds incorporated into newer ones!!
Wow, this one gave me goosebumps! remembering growing up watching Studio Ghibli films…brilliant work, your ideas and execution are always a step ahead from the rest….loved it. ❤
Thank you! I’ll have to check those films out. I’m glad you enjoyed the video!
What the!!!!!!!!!! This is beyond amazing!!!! Ok How Much :). Wowwww so cool
:) Thank you Shon!!! Not sure there's a price tag on this one... yet.
Wow! What an amazing work!
Thank you so much !!
@@TabletopWitchCRAFT thank you for this video! So solid works, it's awesome!
@@БледныйЙорик You got it! Thanks for watching :)
This is an astonishing work of art! The detail and thought that has gone into making it is just mind blowing.
Thank you so much Annette :). I really appreciate that!
Over the top! This is beyond craft and is now art. Kudos!
Thank you so much !!!!!!
I’m blown away! Way more than incredible!!! 😊
Thank you so much !!
That ship is amazing! Nicely done on all fronts.
Thank you!
Legendary build! Awesome!
Right on!!
That's really awesome!!!! I love how the flags are on the air!!!! :D
Thank you!!
So impressive!
Thank you!!
All of youre builds are amazing but this one is on a whole new level. Truly amazing
Thank you Sebastiaan!
@@TabletopWitchCRAFT will these shifting land sets also be available in Europe?
This boat looks just AMAZING !!!!
Thank you Tom!
@@TabletopWitchCRAFT 😍
OK, sensei, it seems to me that there were a lot of small projects combining into this totally bad ass build. If I could use the metaphor of many instruments in a symphony coming together to create a Beethoven level composition. I am astonied, in other words, surprised at it’s awesomeness. -Rick
Right on Rick, certainly a lot going on here! It was great sharing it with you on Discord as well!
Very impressive as always
Thank you Christopher!
Absolutely brilliant details and wow look at all the exquisitely beautiful colours/ shadeing/ highlights and must say the your design is breathtakingly epic your are a master craftsman with all your creations 💕💕💕💕💕 so Congratulations 🎉👏🎉🎉🎉 we love your Airship love from Tara Maria Travis/Tara Howarth 💕😘😘
Thank you so much 😀 It really does mean so much that those that take the time to watch my content truly enjoy it!
Dude! What an awesomely, epic build!!! 😮
Thank you Tim !!!
En tant que joueur kharadron, et amateur de bateaux /îles volants en tout genre, j'adore ce build. C'est excellent, c'est modulaire, c'est plein de gadgets, c'est brillant ❤
Merci d'avoir partagé ça. Je suis content que le bateau te plaise !
Wonderful job. Also, the fact that Noble Knight Games is sending you things to work with is just making me want to shop there even more... and I'm a regular. I've put in two orders this week already!!
Thank you, and thank you for sharing that. They are a great company. Let them know you saw the video as well!!
That's pretty cool.
Thank you !
Outstanding work!! Beautiful paint job too! I loved the way you brought it all together. Great job!
Thank you so much Ron!!!!
Epic maybe now u build maybe like spead boat ones thay might be raider airships ? Or a cool docking area ? Or landing pad ? For display or game play?
Thank you! Oh yeah this opens up the possibility of a great series for the channel!
@Tabletop WitchCRAFT now I'm hoping for a little series I can totally see like just small upgrade builds like a giant chain balista that can wrap around a dragon or a wyvern and pull them close or a dragon or wyvern hunter air ship just the possibility 😅sorry just really amazing I'm sure ur player are gonna do some pretty amazing things in ur campaign with that just make sure they don't shoot eachother out if a catapult
Unbelievable build. Very epic. It is so cool, I wish I had the ability and patience for something like this.
Thank you !!!
Dude, this is over the top amazing. You've outdone yourself.
Thank you Bill !
Airship for the win!
Right on!!
My heart stopped when the ship tipped over. Absolutely beautiful build man. Now all you need are some enemies to blow off those cannons and a dragon that thinks it's cool to strap those cannons to it's. Never seen a cannon dragon before 🤔
Thank you Tyler!! Yeah my eyes doubled in size when it tipped over as well !
Absolutely epic John! Thank you for sharing your hard work and inspiring us with our own builds!
You got it, thank you Kevin!
What an amazing build!
Thank you so much!!
I cant even begin to describe the level of awe inspiring, jaw dropping epic next level WOW that does justice to that masterpiece. I am just going to pick my jaw up from the basement and try and step up my game.
Thank you Samantha :) I really appreciate that !
Absolutely incredible!!
Thank you!
Going to have to replace those cannons with ballistae but challenge accepted! The design is so impressive. You have become Neo with foam! Great job, John!
Haha right on Tim. I almost added them to the ship!!
Wonderful video! I can’t believe how creative you are. Very proud of you..
Thank you :). The flags look great on there! Thanks for the help!
Amazing is all I can say
Thank you James!
WOW!!!!! Amazing!!
Thank you Kimberly!
That is BEAUTIFUL!
Thank you !!
This is the most epic build to date !!!!
Thank you!!!
Oh ya baby! Sweet!
Right on !!
That is spectacular. Very well done.
Thank you!!
😊thank you
Thanks for watching:)
This airship looks awesome.
Thank you!!
Awesome build brother! Beautiful work of art and creativity, you're an inspiration!
Thank you so much 👍