Nice to see this repair in practice! Just one tip: never tighten the housing with a drill driver. The screws are self-tapping, that means the first time they are driven in they cut the thread. When doing this several times, the hole might get damaged until the point where you can't tighten them at all. Instead, let the screw seek the thread using a hand bit. Screw in carefully, while feeling the torque is not too high. When the torque is too high, you're cutting new thread, thus damaging the hole. Revert and try again until it runs smooth. At the end, tighten firmly.
Nice to see this repair in practice! Just one tip: never tighten the housing with a drill driver. The screws are self-tapping, that means the first time they are driven in they cut the thread. When doing this several times, the hole might get damaged until the point where you can't tighten them at all. Instead, let the screw seek the thread using a hand bit. Screw in carefully, while feeling the torque is not too high. When the torque is too high, you're cutting new thread, thus damaging the hole. Revert and try again until it runs smooth. At the end, tighten firmly.
Soy de republica dominicana me gustaria saber como puedo pedor esa pieza por amazon o ebay y como se llama muchas gracias