Haha I appreciate it. I wanted my build to be elegant but simple. It really took some time for me to decide to go for since it cost me a lot 💰 🤑 maybe it's not worth it but I get to see this beauty everyday 😁
Amazing build with great video quality for your first video post, looks like a lot of time and effort went into it. Looking forward to another video from you...😊
Jaw open the entire time I was looking for white builds with the same cpu and gpu So glad I scrolled and found this Was wondering if you were gonna do vid on the rest of your setup
I just built my rats nest version and am looking for ideas and inspiration from others that arent huge influencers like linus and jayz two cents. My only confusion is if your putting multiple ssds in why not just use a 1tb for the boot drive and spend a little more on like a 4tb so you shouldnt ever have to open it up. Granted 6tb is a fair amount of storage, i just would have done it a bit different in that aspect ans had the other 2 for storage only and the boot drive also contain programs like icue and things like that. Other then my own preference that is a great build and video.
Im not a big fan of the Y60 case but this was a nice build..very clean.. although id be worried about not having two 360mm rads to cool a 13900k and 4090.
Great build looks great! Quick question how did you mount the pump reservoir to the bottom of the case ? Did you open the bottom of the case or is there another method to do this ?
Is that really a 40mm rad on top? I have almost exactly all the components you've installed but I was under the impression there was only a 30mm clearance on the top bracket so I got the S360 EK variant vs. P. Also what are your temps like? Great build!
It's actually 30mm on top. Didn't realize that link was showing 40mm. Thanks for pointing it out. In very heavy use I get around 60C cpu and 40C gpu. Standby is around 35C cpu
How on earth did you manage to get 2 kits of 2 x 16GB 7600mhz kits running?! I can barely get one kit of 7200mhz running with my 13900ks and z790 hero board.
Its not very stable with max 7600mhz with 4 dims. It works fine with 2 dims at 7600mhz with the latest bios. Although, I was able to mess around the settings in the bios to have a stable 7200mhz with 4 dims. I recommend using 2 dims for best performance.
Around 8k, but it will vary around. Check out the description. I have linked all the parts that I used for my build. I was thinking of using red too. Hehe, good luck 👍
Love this build.. the only thing I didn't like was by Hyte, they put black cables for the case on a white case... makes zero since should have been white as well for front panel and such.. but all in all I am really thinking of getting this case as of right now I am in a full tower and need to down size my HDD's I have 6 HDD's and 3 SSD's and 3 M2's 2 DVD rw's NZXT HUE and hotswap 2.5 bay my case has 9 bays total is the CM storm have had it for a little over 7 years and has had 4 different sys in it :) time for a change thanks again for a great video and sweet build...
Hey what do you use to any PC building software to plan out the build prior to making it? My biggest issue is not knowing how many fittings or other peripherals i'll need while building.
hai bro love from india south - bro 7800x3d or 7900x plz tell which one is best for me, or any suggestions - this cpu for only streaming gaming all for youtube and gameplay rendering in premiere pro photoshop thats all
Why are people are putting in 128 GB of ram from two split 2x32gb sticks? They aren't meant to do that, and the speeds will only be optimal if it was a 4x32 kit since ddr5 is relatively new and has yet to be manufactured. You would have been better off slotting 2x36 until they released the proper ram stick kits.
just noticed you got the samdung 990 and 890 pro's you should look into the XPG s70 blade 7400mbs 2tb 149.99+ 19% on prime.. vs 990 pro 229.99 on sale. and they claim 7,450/6,900 MB/s samdung 880 pro 2tb $189.99 each on sale.. so over 700.00 for samdung vs 450.00+ for the XPG's and they are faster almost 50% faster than the 980's Samdung lies in one ad they say the 990 pro is up to 50% faster yet the specs say 7000mbs for the 880 pro.. hmm I don't think that equals out to 50% of 7450mbs might just be me not sure but I was looking at a few sets of benchmarks and well the samdung didn't make it to what they claimed... only in one test it got close and that was because Samdung used a single file type and not mixed files like EVERYONE ELSE DOES...lol Just Saiyan...
Nice build! Starting a similar one now. Noticed you linked Vector FE block. Does the FE block fit that gigabyte card? Would be nice because it's considerably cheaper than buying the gigabyte variant block, at least from what I can find.
Five sections of 120mm thin radiators for ~650-700 W of total thermal power is enough? Maybe yes, if you use 2200 rpm fans, that making noise like a vacuum cleaner :)
@@_bbkm My system utilizes Phanteks Enthoo 719 case, with two 60mm thick radiators 360(top) and 480mm(front), Corsair ML120 and Lian-Li SL120 v2 fans. When at 1300 rpm 45*C on GPU 3080Ti under furmark is achieved. With under 30 dB of noise.
nice build but too much thermal paste 💀
Ty and yes, I did fix the thermal paste on my second take, but the video clip didn't save 🙃
@@_bbkm man how much I would give to be able to have a computer like this
Haha I appreciate it. I wanted my build to be elegant but simple. It really took some time for me to decide to go for since it cost me a lot 💰 🤑 maybe it's not worth it but I get to see this beauty everyday 😁
@@_bbkm Hopefully when I finish college I can do something similar
@@_bbkm idk if this is true or not but is it better to have more fans in ur pc or nun of that matters?
Love seeing more builders! Keep up the good work!
Thanks! Will do!
Imagine the games you could run on ultra graphics with this monster
It's pretty sick. I have the ultra wide screen 49" and the graphic runs so smoothly
@@_bbkm whats the temperatures of this pc while gaming on max 4k ultra??
@@mahomedfakir977 the max setting on my ultra wide is 60-65F on cpu and 45F on gpu
@@_bbkm that's so nice😂
CRAZY @@_bbkm
I’m revamping my setup and was looking for a hyte y60 white/black build to get some ideas
Your setup is amazing
thank you!
@@_bbkm Thanks to you!
You gave me a lot of inspirations, I'll get all parts this week!
It will be my first custom watercooled setup
Awesome to hear! Some parts from Amazon links have changed. I'll double check and I will send you the correct parts that I used
@@_bbkm I’ve already bought everything, unfortunately I didn’t use your link because I live in EU
Ah I see good luck with your build 👍
FYI Im going to update my case to hyte y70 hopefully I will post a video soon
Favorite build so far on the Y60 and great track selection! 🔥🔥🔥
Dude living his life 🎉🎉😮
Amazing build with great video quality for your first video post, looks like a lot of time and effort went into it.
Looking forward to another video from you...😊
Thank you! Yes more to come soon
One of the most beautifull builds i've ever seen!
Appreciate it! Thanks for watching! More builds are coming soon 😆
This setup is insane
This was definitely fire. My jaw dropped when I saw you disassemble the GPU and did your thing for it. Truly love this 🔥
Glad you liked it!!
Best pump position 🔥
nice job. looking forward to seeing more from you
TOP OF THE LINE
It's so beautiful not gonna lie..
ty very much =)
That is beautiful build
What a beautiful build
Ty I try to make it elegant but simple 😁
Awesome intro!
Mom i need this pc for my school projects.
COOL!
We made something great!! Now I want one
Big props to your editing skills!! The next one is definitely going to be your build 😀
more builds pls! This is super dope!
AYO??? THAT COOLANT COLOR?>?
Nice build, I hope we see more. By the way, I think a relaxing song would be better for the video. ❤
True
beautiful
great video and great computer. gj
Tyvm 😊
High quality vid
Awesome
Jaw open the entire time
I was looking for white builds with the same cpu and gpu
So glad I scrolled and found this
Was wondering if you were gonna do vid on the rest of your setup
Glad you liked it! And yesss I'm going to do a video of my setup soon!
Amazinggg
I just built my rats nest version and am looking for ideas and inspiration from others that arent huge influencers like linus and jayz two cents. My only confusion is if your putting multiple ssds in why not just use a 1tb for the boot drive and spend a little more on like a 4tb so you shouldnt ever have to open it up. Granted 6tb is a fair amount of storage, i just would have done it a bit different in that aspect ans had the other 2 for storage only and the boot drive also contain programs like icue and things like that. Other then my own preference that is a great build and video.
wow😊
I wanna build my next pc like this
Welll looking PC hope you make more with Corsair Products
Here i was thinking youtube didnt allow bukkake vids...🤣
lmao I like to say I have a milk factory build
😍
nice
Wallet: Why did you have to do this? 😰
💰🤑💰
Looks like fish aquarium but good creativity
Im not a big fan of the Y60 case but this was a nice build..very clean.. although id be worried about not having two 360mm rads to cool a 13900k and 4090.
Great build looks great! Quick question how did you mount the pump reservoir to the bottom of the case ? Did you open the bottom of the case or is there another method to do this ?
You have to open the bottom of the case and use the screws to hold the pump
Which are the intake and exhaust fans?
if u wanna chenge the RAM?
Do you have any problems with booting the 7600mhz or stability?
Yes it's not very stable with 4 dimms at that speed even after upgrading to latest bios. With 2 dimms it will work fine at 7600
Where the bloody hell did you mount the pump res, i have the same case and i dont see any mounting locations
you can force one in there took me awhile to get the right angle
Great job
May I know total cost for this beautiful build sir?
8-9k
Is that really a 40mm rad on top? I have almost exactly all the components you've installed but I was under the impression there was only a 30mm clearance on the top bracket so I got the S360 EK variant vs. P.
Also what are your temps like? Great build!
It's actually 30mm on top. Didn't realize that link was showing 40mm. Thanks for pointing it out. In very heavy use I get around 60C cpu and 40C gpu. Standby is around 35C cpu
Would love to know how you anchored the reservoir where you did.
Trial and error. But eventually find the perfect spot 😁
🔥🔥🔥🔥🔥 setup! Great work 👍🏽😎
trop beau
How on earth did you manage to get 2 kits of 2 x 16GB 7600mhz kits running?! I can barely get one kit of 7200mhz running with my 13900ks and z790 hero board.
Its not very stable with max 7600mhz with 4 dims. It works fine with 2 dims at 7600mhz with the latest bios. Although, I was able to mess around the settings in the bios to have a stable 7200mhz with 4 dims. I recommend using 2 dims for best performance.
I have a feeling this build is going to leak one day!!!
Ya I might have to call tech support to make sure it's not a SS issue 😁
can you do giveaway for this pc because it looks amazing!!!!!
How much was the build if you mind me asking I might copy your build and put red liquid cooling
Around 8k, but it will vary around. Check out the description. I have linked all the parts that I used for my build. I was thinking of using red too. Hehe, good luck 👍
Hello.
In my opinion you have applied an excessive amount of thermal paste on the CPU.
Haha, someone finally noticed it. I did fix it on second take but the video clip didn't save 🤦♂️
Love the build! If I may ask, how much did everything cost?
Appreciate it! Currently, it's around $8k but it will vary around. I linked all the parts in the description if you want to check it out 👍
240+360 rads for 13900k + 4090 (about 700w total)? It's interesting what temps do you have under load. I'm afraid it will be more than 65 on gpu.
Under heavy load cpu 60-65 and gpu under 45
Damn that is my life ideal desktop XD
one minute, for the fan on the 240 radiator, you draw hot air into the case ?
My airflow setup is the bottom fans and 240 fans as the intake and back and 360 fans as exhaust. I hope that helps
What’s the performance on the games so far on max settings
160+ fps on max settings ultra wide screen 60 CPU 45 GPU
@@_bbkm Ty my G
that gigabyte 4090 have an absolute chungus of a cooler...that shit is at least a 4 slot gpu
Ya 90% of it is just the heat pipe
that things if mounted normally on a mobo is probably gonna break the slot after a few months
yea thats why they introduced those gpu support brackets now lol
Love this build.. the only thing I didn't like was by Hyte, they put black cables for the case on a white case... makes zero since should have been white as well for front panel and such.. but all in all I am really thinking of getting this case as of right now I am in a full tower and need to down size my HDD's I have 6 HDD's and 3 SSD's and 3 M2's 2 DVD rw's NZXT HUE and hotswap 2.5 bay my case has 9 bays total is the CM storm have had it for a little over 7 years and has had 4 different sys in it :) time for a change
thanks again for a great video and sweet build...
Hey what do you use to any PC building software to plan out the build prior to making it? My biggest issue is not knowing how many fittings or other peripherals i'll need while building.
I didnt use any program. I drew up a sketch and that's about it. Ya I end up getting more fittings in the end tho lol
Can you please tell me what camera you used?
Sony fx3 and Sony a7s3
hai bro love from india south - bro 7800x3d or 7900x plz tell which one is best for me, or any suggestions - this cpu for only streaming gaming all for youtube and gameplay rendering in premiere pro photoshop thats all
7900x seems like it will be better IMO
Да главное что комплектующие топовые ,💪🏿💪🏿💪🏿🙆🙆🏼♀️🙆🏼♂️
Top end components 👍
whats the price on this build?
8-9k
Why are people are putting in 128 GB of ram from two split 2x32gb sticks? They aren't meant to do that, and the speeds will only be optimal if it was a 4x32 kit since ddr5 is relatively new and has yet to be manufactured. You would have been better off slotting 2x36 until they released the proper ram stick kits.
Ya 2 dims are best for performance, but I used 4 dims just for the asthetic for now
Nicely done! May I ask where can I buy the electric screwdriver you are using? Or can you give me the name of the screwdriver?
Thanks. I appreciate it! It's called HOTO electric screwdriver. I have included all the links to the parts in the description. Enjoy!
Sickkkkkk
yo brian i need you to build me a comp...
How stable is the memory? I ended up going with 2x32 sticks since 4x16 wasn't stable and have read of many people having the same problem.
At max speed 7600, it is not stable. However, I was able to get it to work at 7200. I recommend using 2 dims instead for better performance
Would it be difficult to clean this from dirt?
It is very easy to clean, plus it has a filter on the top
it's a real PC, but it costs a lot, that is, I'm buying a car and even a new one from the factory, but the PC is OK 👍
just noticed you got the samdung 990 and 890 pro's you should look into the XPG s70 blade 7400mbs 2tb 149.99+ 19% on prime.. vs 990 pro 229.99 on sale. and they claim 7,450/6,900 MB/s samdung 880 pro 2tb $189.99 each on sale.. so over 700.00 for samdung vs 450.00+ for the XPG's and they are faster almost 50% faster than the 980's Samdung lies in one ad they say the 990 pro is up to 50% faster yet the specs say 7000mbs for the 880 pro.. hmm I don't think that equals out to 50% of 7450mbs might just be me not sure but I was looking at a few sets of benchmarks and well the samdung didn't make it to what they claimed... only in one test it got close and that was because Samdung used a single file type and not mixed files like EVERYONE ELSE DOES...lol Just Saiyan...
Nice build! Starting a similar one now. Noticed you linked Vector FE block. Does the FE block fit that gigabyte card? Would be nice because it's considerably cheaper than buying the gigabyte variant block, at least from what I can find.
you need EK-Quantum Vector² Master RTX 4090 D-RGB - Nickel + Plexi
www.ekwb.com/shop/ek-quantum-vector2-master-rtx-4090-d-rgb-nickel-plexi
Dose it work???
Yes lol
Price???
8-9k
1:21 lol too much thermal paste? 😂
yup lol fix it on the second take but video clip didnt save
None of the pipes are horizontal
They are aligned afterwards
holy crap thats alot of paste
Yes, I know lmao I fixed it in my second take, but the video clip didn't save. 🤦♂️
Is it bad that I cringe every time they use that screwdriver in a clockwise pattern instead of the "X"?
А почему в коробке от gigabyte gpu lying paper of rog
Personally, I'm not a huge fan of Gigabyte. Anything DELL past the year 2003; count me out.
build me one?
this is pretty much the pc build i want xD
I can definitely build you one. Just cover for the parts and shipment =)
overkill ngl
this pc play pikachu very lag
That’s like $1500 of fittings ffs
🤑
How many fittings should I get for a build like this. I planning on doing a custom loop soon
@@expert8665 at least 10-12 and you can just bend the tubes unlike me lol
Bro too much thermal paste
Haha, I know. Fix it on my second take, but the video clip didn't save
Nah. Way too much connectors
my PC is better
Five sections of 120mm thin radiators for ~650-700 W of total thermal power is enough? Maybe yes, if you use 2200 rpm fans, that making noise like a vacuum cleaner :)
its enough and its quiet for me
@@_bbkm My system utilizes Phanteks Enthoo 719 case, with two 60mm thick radiators 360(top) and 480mm(front), Corsair ML120 and Lian-Li SL120 v2 fans. When at 1300 rpm 45*C on GPU 3080Ti under furmark is achieved. With under 30 dB of noise.