How To Install Board And Batten Vertical Vinyl Siding
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- In this video I will show you how to install board and batten vertical vinyl siding. This is a product made by Certainteed. In is 7" board and batten castle stone color. Vertical vinyl siding is not hard to install with the right instructions. Vertical siding installation is a DIY project anyone with simple carpentry skills can do. .
🟡 Check out my Amazon store! 👉 www.amazon.com... . Here you will find tools and supplies used in my videos. (DISCLAIMER- I am an Amazon affiliate. I get a small commission that help support the channel at no extra cost to you)
🔴 Subscribe for more home building tips to save a TON of money here:
th-cam.com/users/the...
Disclaimer: This video is all based on my personal opinion and is for entertainment purposes ONLY. I am not a financial advisor, CPA, attorney, tax advisor, electrician, plumber, housing contractor, designer, or any type of profession to give advice. I am just a consumer sharing my experiences and research. If you do need knowledge for those types of things, I will advise you to seek help for those professionals.
![ฮักเทื่อสุดท้าย - บอย ศิริชัย [OFFICIAL MV]](http://i.ytimg.com/vi/-1PoPoQ-B-k/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 76 | คู่เอก "ผึ้งหลวง vs สมิงดำ"](http://i.ytimg.com/vi/9SBshmGQOIM/mqdefault.jpg)
Do you like the look of this vertical siding or horizontal siding?
@@TyriontheYorkie Thanks Jason! I appreciate your comment! Stay tuned!!
Vertical!!
I can't stand vinyl sidings don't matter which way u run it
Thanks R K!
Everyone has their likes and dislikes!
Great vid! Just one suggestion...the siding shouldn't rest on the bottom J channel. You should have a small gap to allow for expansion and this helps avoid oil canning. Learned this from my cousin who had to learn this the hard way.
Great video, and I learned a lot. I have a question, though. When you nail the undersill trim to the inside corner, you are passing the nail through a solid part of the inside corner and so it won't be able to expand/contract.
I am retired now but installed a lot of siding in the past. You covered the instalation well. I would only add that if there is a question on whether the siding is snapped in or not try moving the piece in question up and down. If you can't move it a little it is not locked in.
Shut up. Why are you even here?
Thanx for the video, I'm installing this exact siding on my house right now- hopefully before snow. I had no idea about the utility trim
Hey Bradley! Yes utility trim gives it a nice finished. Thanks for watching and good luck on your project!
Where do you buy it?
@@bmo5082 any building material supplier should have it
The vertical looks GREAT 👍🏻
Thanks Rugguy!
I noticed some finishing pieces along the bottom and top edges. do you have video on that part of the installation?
The color looks good and i love the way it looks, we're starting to see more of that style here in Canada. The installation is very much different here , the construction code would not allow you to nail the siding directly on the structure. A gap is needed with a piece of wood between the final structure and your siding allowing humidity to circulate. Rust might attack your nails , those going through your walls and isolation causing humidity and water infiltration over time. Keep a eye on the outside walls with concrete basement at the bottom, vertical rust lines are indication of water infiltration behind your siding.
I need this man to install my new siding.
Great video! Very informative. I will say, respectfully, that when you cut the siding at 4 1/4, you put your mark at 4 3/4. You might make an edit. Or not. No worries from me! 😁
Good eye! Thanks for watching Everyday Dad!
Very helpful video. Question, the bottom row of J-channel, it seems it would be pretty close to the the bottom of the sillplate (top of the foundation), whereas on regular horiztonal siding it would extend a few inches below that because of the starter strip.
Excellent video.
Thanks Noah!
These vertical siding videos are outstanding. They seem to be the most detailed instructions on the web. What supports the weight of the siding? Is it the J channel at the bottom or do you put one of the nails at the top of the nail slot?
The siding weight is held by the deck and the nails help it from falling off. If that makes sense. Nail in the middle of the nailing slot.
@@TheExcellentLaborer What would I want to use to support the siding if I don't have a deck?
@@ronlaverdiere j channel and you must drill a minimum of 1/8" weep holes no more than 24" apart
Okay question so we are installing it ourself on our double wide it’s staring to dent in on some pieces only on some the vinyl creates dents and it’s not nailed tight. Also the vinyl is only so tall it doesn’t reach the top of the trailer. We had to do a transition strip like an H trim piece but worried about it leaking into it.
absolutely excellent! you do a fantastic job on all these vids and the sound is great. July 12, 2021 22.1k subscribers!!!
Thanks a lot Eric! Appreciate your motivation man!
Thank You!
Thank you, for your illustrations, it will help me in the installation that I'm going to have to do myself..... how much does each slice cost
What is holding the bottom of the siding?
Just watched your video. I learned something today. My question is: do you use J-channel on the top and bottom as well?
Wondering if you can join pieces together to make it longer i only need 6 ft off a 10 foot piece. A waste of 4 feet. If i cannot join
Do you need the utility trim on all 4 sides of the windows and 3 sides of the door? What's the plastic material behind the siding will that keep the outside of the wall waterproof while working on it in case it were to rain?
Great vid , what if the wall is taller than the siding
On the siding box it shows a drawing and the mention shimming the utility strip, do you ever shim that? Thank you. Great video!!
No furring strips? Just hoping the nails stay in whatever sheathing is on the wall?
Great job, very informative!
Thanks R K!
good job
I appreciate that!
Nice work!
Thank you Preston!
Hi, thanks for the videos. I have a question and I haven't seen it on any of your videos. There are a couple of locations in my house for the AC disconnect and water spigot. They cut the hole and put the trim piece, but it doesn't sit flush against the wall because the opening is right on one of the ribs of the siding. Should I just cut the siding so the trim goes all the way back?
I really don't like the gap, also I worry that water might get in.
Thanks
Wow nice job 👏🏼👏🏼
Different strokes for different folks. Either way it's informative. good job
Thanks for watching Jordan!
Looks Good man thank you for your time and info earned a like and a sub 👍keep up the good work!!
Great video, well done
Excellent video, thanks
What's up with nailer? Are there nailer blocks installed at framing or is this plyboard nailer only? Would think u would want stud as nailer?
can you show how to replace an interior panel - I have a damaged one
Do you leave a gap at the bottom and the top by nailing the top in the hole at the top point of the hole so there is a gap at the bottom and the top
If I have an existing corner post would I just install utility trim next to that to get started? I'm looking to replace horizontal siding with vertical.
Great video
Thanks Scott!
I am an amateur... looks like it would last years... it is plastic so I hope the wood underneath is okay with it and does not rot. Great job.
Yes I have remove vinyl siding off houses that have had it on for 25 years. It will last a long time. And water does not get behind it if installed properly. Thanks for watching!
@@TheExcellentLaborer cool..thank you!
@@paulashford4155 welcome!
Thanks for this!
Question,
Do you have a video of a wall taller than 10ft? Using the cross board to make it go up to roof line?
Great video!!
You would just j channel each side of the board and continue on. Same as the top and bottom of this wall. Personally I would install a drip edge before the j channel but a lot of guys don't.
Did you use 3/4 J or 5/8 ? Recommendations?
Did board and batten around my front porch. Wish I would have done more but I got a little cheap. 🤣🤣
I like the looks of the stuff. It is a little more expensive but sets the house off. Hope your project turned out well!
@@TheExcellentLaborer I’m with ya. Glad we added it too. Adds more character I think. Also wanted to let ya know I just finished my trex decking project. Your video on that was gold. My buddies thought I actually knew what I was doing. Haha
@@JHaNG- I’m glad I could help you with your deck! That Trex video seemed to be a hit. Thanks for letting me know man!
How tight do you make the length of the pieces? Leave 1/4" gap at top for expansion?
Informative video but I have a question. When you nailed the trim overlapping the inside corner it looked like you drove the nail inside of the nailing flange without going through a slot. Won't that prevent expansion/contraction of the inside corner? Thanks! I want to do this with my home soon.
Yeah I was wondering about that too, shouldn't it just match up to the holes of the inside corner piece instead of it being wedged into the gap?
Is the utility trim different from the J channel!
This looks great. Do you know the color of this siding?
Castle stone by Certainteed. I hope that helps!
What do you do on gable end 4/12 pich
I like it but I prefer the cedar shingle siding.. great video as usual!
Thank you for sharing
The vinyl Cedar shakes? Thanks GS!
@@TheExcellentLaborer yes, best looking siding in my opinion 😅
Oh yea I love that stuff too! It’s kind of a pain to install but looks great
Enjoyed the video, I'm a little concerned with the trim at the bottom. Will it collect water and just overflow? Thanks
Drill weep holes every couple of feet.
Nice video! How long does the vinyl last? Does it hold up well, and look right, over time?
Yes it does! At least 20 yrs.
@@TheExcellentLaborer thank you!
great
Thank you!
are you able to have one side of the house horizontal, and then another wall vertical? might be a nice way to reduce overlap pieces to make the house look a bit nicer. for example two of my exterior walls are 38ft length, so making those vertical would make it nicer I would think because removing overlap.
I have never done that. That might be a good use for PVC board instead of vertical siding. Good thinking!
What is the price of the square only labor?
What brand did you use here?
VERTICAL VINYL SIDING 2021
Should board and batten siding be strapped? I been told it’s better some people I know had their house done and not happy with it, they wished it was strapped
Yes especially on exterior rain exposed areas. Here it's probably fine. If you have the money definitely do it and make it all plumb
I have a section of siding at the bottom of a 2 story building only the top half of the building has siding the lower section is block. They are a small section where they were overhand small section built that has now been removed leaving me with open plywood and insulation. Can the siding be installed and connected to the rest or does it all have to be taken down and started over!? Thanks in advance!
“Vinyl siding”
I feel sorry for anyone that makes a video.. There’s always people that have to give their 2 cents.. These people came to watch this video on siding install and theyre the ones giving advice.. Lmao
Awesome product. OSB sheathing would probably be a challenge due to not nailing on 16 centers. The strands of OSB have the tendency to split. Are they ring shank nails?
Do you just use j-channel for the bottom as a starter strip
I am also wondering this as I have never installed siding before now
Yes you should use j channel. Make sure to drill 1/8" holes in the bottom of the J every 12" or so to allow water to weep out.
Notice how a good installer uses hammer and nail and doesn't drive the nail tight. Do not use pneumatic nail or staple guns people! Your wall will buckle and look awful when the temperature changes.
😘😘😘😘
In this case we don't need to install j channel
vertical siding should be "plumb" not "level"
Vinyl siding is straight up garbage. Insurance companies in Montana will drop you if you reside your house in it.
When and where are you checking for level?