Hey could you possibly help me with a question I have? Im running a 5700x on a Asus ROG Strix b550 motherboard. Im confused why ryzen master displays PPT 1000W peak levels? For example at idle it shows 3% of 1000W PPT. Also, TDC shows readings around 0-1% of 1000A. EDC appears to be normal though, showing 3% of 180A. Is there a way I can fix this so it displays proper readings?
Criminally underrated tech channel. Just stumbled upon it while waiting for my new Ryzen CPU to arrive and binged all the cpu/ram overclocking videos, and then some more xD. Love the detailed explanations and loads of practical advice. It's a shame I hadn't found this channel earlier, would've made a better choice when picking my RAM :) Keep up the awesome work, you deserve more subs!
Crystal clear step-by-step guide. Your way of explanation reminds me those few great teachers I encountered with over my past decades. Great content, fluent and catching presentation, very well done! Thanks!
This is the most information packed and usefull video about ryzen master tuning I have ever watched. I will start optimising my ryzen system immediately. Great work!!
@@al3xb827 depends on chipset make/model of motherboard, i believe it's paywalled it's advanced tuning so you would have to buy pricy overclocking capable motherboard.
when creating a default profile like at 8:30 I get prompted with a restart request with changes CO - All cores. What am I doing wrong? If I accept id deactivates my Curve Optimizer again...
Hi update from from last message you have to also enable pbo in extreme tweaker then it allows you to alter in Ryzen master also worth noting that the changes in bios to ppt ect will not take affect unless they are also entered in both pbo in the BIOS. Maybe this may help others that have had the same issue.
So I’m good up until about the 11:30 mark or so. My 5800x can run on -25. I created a new profile to turn on pbo so I could adjust the individual dials, but Ry zen master tells me it requires a restart. I hit ok. And then it turns off curve optimizer. My offset goes away. What am I doing wrong?
For those having issues with Ryzen Master requiring a restart after changing the PPT/TDC/EDC settings: In the new Ryzen Master it's a bit different. Once you have set those three values, below you'll see a row called "Curve Optimizer Control" and there you need to select Per Core and enter the curve settings which you have defined in an earlier step. This way you can keep the Curve Optimizer and the manual PPT/TDC/EDC settings. Still will require a restart though, I guess that's a thing with the updated Ryzen Master.
Thank you very much for this video. I'm not the most tech-savvy pc user out there but you explained everything very well here It gave my 3900x a nice performance boost Cheers from Denmark
first of all, love the video and it's awesome you did this. has helped me a lot and from looking at the comments, be proud of making this video and that even 2 years later it's STILL helping. figured since i would start tweaking my CPU's and have used this video and methods to tune my 3 CPU's, 5600x, 5700x and 5800x3D have significantly reduced temps and gotten better performance on all of them. all CPU's i was easily able to do negative 30 for the offsets. sadly with my 5800x3D CPU Ryzen Master will not work with tweaking like this, so i had to do the fine tuning in the BIOS of my aorus master b550, took a lot of restarts, but finally got my temps reduced by almost 20c... and got my full load clocks from default, an inconsistent 4.366 area to a constant 4.449 for my 5800x3D these are where i stopped PPT = 93% @95w (Default was 142w) TDC = 96% @65a (Default was 95a) EDC = 100% @100a (Default was 140a) i could easily play with these more. but i figured this was a good stopping point for now. i will edit this if anything more happens or i come across anything else. EDIT: started testing temps for the hell of it, using the furmark 1 and 2 CPU burner for max temps, the max my CPU got after doing this was 75c on an AIO cooler for about an hour, before with default settings and nothing touched i was hitting about 86c if not more(didn't do longer than 5-10 minutes on default because of how fast the temps shot up.). definitely more beneficial to do this on the 5800x3D, the other CPU's it did help as well, just not THIS significantly...
@@al3xb827 depending on the motherboard you may have to find how to edit or enable it. Usually googling your motherboard will help. I'm using for my stream pc a aorus b550 pro and then a master version for my main PC. Most of the stuff is similar for my motherboard from this video but differently worded. some things gotta go a different route to get there.
@@al3xb827 again, idk which mobo it is, not hard to look up though, does show some can, i don't know if all can. just type in your mobo and then "curve optimizer" or "how to enable curve optimizer" or something similar, should be able to find it. i do remember some lower end mobo's couldn't do a whole lot like that unless you had beta BIOS installed. but that could be for specific CPU's and mobo venders...
@@al3xb827 replying again just in case as it doesn't show i replied... idk, you would have to look it up. i still don't know the mobo you have. but just google your mobo with "curve optimizer" or "how to enable curve optimizer" then you should be able to find something on how to do it if your able too.
Can we PLEASE get an updated guide for the new Ryzen Master that requires a restart after every change? I sorta fucked with my computer and i regret even messing with ryzen master because now it didnt boot
You can save it, find a tutorial for resetting bios, It happened to me once when I first tried and there is supposed to be a manual way of restarting your bios IRL if it won't boot
This vid helped me the most so far in 2024 - I can now feel safe using PPT 180 EDC 155 TDC 145 Everything is within acceptable limits and I'm not even hitting 80c - A very kind 3% more in both ST and MT according to CPU-Z - Liquid Cooler 340mil NZXT. I don't know if I'm going to pass a mem read test yet using unlocked AIDA64 Extreme listed in Armory Crate free utilities. If sensor panel=ON - Renaming files is dodgy. Chasing the Holy Grail of eye candy and performance. Such is the life of a Technophile. A Gen X Shalomie Like me doesn't mind if they get caught skulking around the grey tech yard.
Sadly my 5800x doesn’t seem to hit 100% PPT or TDC even with a curve offset of negative 25. Tried playing with the values to get them closer to 100% but didn’t record any difference in frequency. I did, however, notice that dropping EDC from 140 to 120 gave me an increase to my frequency. Now running 142 / 95 / 120 but was able to add +100 MHz in the BIOS as well. Guess luck of the draw wasn’t on my side.
@@CoercedNut are you saying you want to lower these 3 numbers as close as you can so when under full load they're at 100/100? Does making your PC use 100% of the limit somehow increase performance or something?
Two Things First, I just launched my new motorcycle channel. Please give it a sub so I can get a custom URL. It is focused on returning to motorcycling after a 7 year break. th-cam.com/channels/PrS9ZDxFoTrmvTShipB64w.html Second, this is a re-post. Folks didn't like how I ended the previous video, so I added some conclusion content to this one. TH-cam doesn't allow you to append a video, so I had to start from scratch. Hopefully this clarifies what to do.
every time I try to apply a different profile in Ryzen Master it prompts me to restart so it can enable CO - All Cores. At which point the Curve optimization in the BIOS is disabled. Not really sure what to do at this point.
Getting boost up to 4.91ghz on my 5600x using pbo2 with curve optimizer and using motherboard for pbo limits Aorus b550 pro v2. Usually at 4.85ghz most of the time though. Temps never over 77c during benchmarks and 67c during gaming with Corsair h100i Aio.
@NagoyaR that`s what I too know too! afaik you can only get 200Mhz more with POB alone, and thats if you activate the Boost Override option all the way up
@@joak-web Well I 100% get 4.91Ghz during single core workloads. I have seen it in HWinfo64 and Hwmonitor. All silicion is not equal. And im not the only person with a 5600x that has achieved these speeds either.
R5 5600x, Well I turned PBO first qnd then increase black from auto/100Mhz too 102 and get 4.96Gz (goes around 1.4Vcore) one core boost and 4.8Ghz all cores boost (with 1.3Vcore avg) idle 0.99Vcore. Gain 5fps avg more in warzone2 over manually overclock 4.85Ghz on 1.41Vcore. I have passed 5Ghz with 103Mhz black × auto with 4.9Ghz all cores was unstable because of my enoying ram memmory. Temp for my CPU around 66C while gaming and 72 on Cinebench r23 30min stability test. When I get home from holiday I will try to lower my mem from 3260Mhz to 3060Mhz and go for 103Mhz to get 5Ghz. I have tried 104 black with +200Mhz boost pbo but black screen. My old back in the day i7-4770k was 120Mhz black × 39 to get almost 5Ghz on my old i7 but performance was like a r5-1600x. I have owned 1600x and was clocked to 4.3Ghz with air cooler and avg temp was 90C and max 107C temp. I did not push my old 2600 non x and was clocked low.
There are some kind of bugg in some motherboard thqts alow you to get +300Mhz out of PBO but did not work for me, non k intel CPUs had overlook too because of bugg. Depending on bios.
I followed the guide so far, and was able to get to -30 with my 5800X and a Darkrock Pro 4! Time to follow the rest of the guide. I just hope it addresses single-core loads like CSGO and not well-balanced multi-threaded loads like cinebench.
@@buck3t_ not sure. Any time I tried to select a specific per-core offset for my two strongest cores, the fps dropped. So I just left It at -25 for all cores
@@recnepSpencar I've been trying to find out how to oc my 3300x and all I found till now was all core oc's. This looked a lot more promising than just my auto oc 200 boost... I think i get 4500mhz ish on 1 core... Everything else is pretty much stock tho
R5 5600x, Well I turned PBO first qnd then increase black from auto/100Mhz too 102 and get 4.96Gz (goes around 1.4Vcore) one core boost and 4.8Ghz all cores boost (with 1.3Vcore avg) idle 0.99Vcore. Gain 5fps avg more in warzone2 over manually overclock 4.85Ghz on 1.41Vcore. I have passed 5Ghz with 103Mhz black × auto with 4.9Ghz all cores was unstable because of my enoying ram memmory. Temp for my CPU around 66C while gaming and 72 on Cinebench r23 30min stability test. When I get home from holiday I will try to lower my mem from 3260Mhz to 3060Mhz and go for 103Mhz to get 5Ghz. I have tried 104 black with +200Mhz boost pbo but black screen. My old back in the day i7-4770k was 120Mhz black × 39 to get almost 5Ghz on my old i7 but performance was like a r5-1600x. I have owned 1600x and was clocked to 4.3Ghz with air cooler and avg temp was 90C and max 107C temp. I did not push my old 2600 non x and was clocked low
@@catalystJJ I have the Curve Opt at neg 20 PPT 105 TDC 85 EDC 30 I have a 360EK aio Running Cinabench I boost to 4716 all cores. Core temps settle at 76.c after 20mins Hope that helps
@Collin Lutz it does what it wants even if I didn't set it myself, it underclocked my ram for no reason, it reseted my CO settings, I can't even apply anything because it always wants to set Auto OC mode but nothing happens after the reset and it still wants to apply the Auto OC over and over again even if it already is set on Auto OC
@Collin Lutz I am having a terrible experience with Ryzen Master and I have no idea why bcs everywhere I looked it worked and it doesn't even give me an error or anything
Thanks for the video! Quick question, when I try to change the PBO values in Ryzen Master it asks to restart my PC and turns of the Curve Optimiser. Am I doing something wrong or is there another setting I have missed?
I have a threadripper 2950x and don't have a curve optimizer option anywhere in my Asus Zenith Extreme motherboard bios. I'm trying to (ironincally) optimize single core performance to enhance my iRacing sim experience. Any suggestions would be greatly appreciated. If helpful, i run iRacing with a Nvidia 1080Ti and HP Reverb G2 VR headset with 64gb of RAM.
If you want higher clocks, you dont need to increase TDC or EDC. My Ryzen 5900x is running CO + disabled PBO limits and it clocks 4.4ghz allcore on a max power draw of 142w, with single thread being 4.95ghz.
R5 5600x, below 130W and 4.96Ghz boost with 4.8Ghz all cores. Well I turned PBO first qnd then increase black from auto/100Mhz too 102 and get 4.96Gz (goes around 1.4Vcore) one core boost and 4.8Ghz all cores boost (with 1.3Vcore avg) idle 0.99Vcore. Gain 5fps avg more in warzone2 over manually overclock 4.85Ghz on 1.41Vcore. I have passed 5Ghz with 103Mhz black × auto with 4.9Ghz all cores was unstable because of my enoying ram memmory. Temp for my CPU around 66C while gaming and 72 on Cinebench r23 30min stability test. When I get home from holiday I will try to lower my mem from 3260Mhz to 3060Mhz and go for 103Mhz to get 5Ghz. I have tried 104 black with +200Mhz boost pbo but black screen. My old back in the day i7-4770k was 120Mhz black × 39 to get almost 5Ghz on my old i7 but performance was like a r5-1600x. I have owned 1600x and was clocked to 4.3Ghz with air cooler and avg temp was 90C and max 107C temp. I did not push my old 2600 non x and was clocked low
When I am tuning it, my cpu doesn't go up in terms of MHz, it stays at 4.1 and never goes up, but in the ryzen master it says that the max is 4.4, is there any problem here?
Nice! Im a noob at oc'ing a cpu, and this helps me alot. Looking forward to some fiddeling later tonight. Also habe to check out the extended vid og ryzen master. Thanks !
@@TheGrayingTech I fiddeld so much I had to do a cmos reset.. now my network card wont work with ethernetcable. "Commom" problem with Realtek 2.5gb. Luckily, retailer said they'll give me a new mobo... I just have to send in my old one first 🤣
Hey! I have a Tuf Gaming motherboard. And I am looking for Curve optimizer and I don’t see it? Is there any alternative names for it? Or does my mother board just not have it? Thanks (I also have a 3700x if that changes things?)
When I run Ryzen Master, and click Apply under Creator tab, it says "Following configuration requires Ryzen Master to Restart Windows, then Ryzen Master will automatically open. *CO-All Cores. Do you want to apply now". And if I hit yes, it restarts and puts Curve Optimizer in BIOS back to defaults. Also, I have a Ryzen 7 5700X(65w), Ryzen Master shows TDC and EDC values of 60A and 90A as you said, but under PPT it shows a value of 76A and not 88A as you said, I take it 76A is the correct value for the 5700X ?
EDIT: Used this guided 2 years ago when I updated my Ryzen CPU to 5700X. Running on an older ASUS Strix Z470 with bios updated to latest 9-23 version which adds support for 5 & 7 series CPUs. Updated Ryzenmaster and discovered Curve Optimizer. Would love to see an update addressing this feature for newer AMD processor tuning.
His method partially works now. Example when hitting the apply button it will restart and save to bios. Can't change pbo limits on the fly like he did with cb23 and ryzen master. Did you managed to change things like in this video?
Hi TheGrayTech I followed this tutorial, and this is what I got in CB scores stock test 5940 test with EDC at 51 from 31 8502 following the tutorial making all the relevant changes on my 7th test got a stable score of 9045. my CPU is having follows below. Processor AMD Ryzen 5 3600 6-Core Processor 3.60 GHz Installed RAM 16.0 GB System type Windows 11 pro-64-bit operating system, version 23H2 x64-based processor Is this good or should I run more tests I haven't had crash's yet, but I don't want to push my Louk has this seems like a big jump from stock. Or is this normal.
PS I continued with this still no crashing and I have a score of 9272 so I ran 3Dmark and beat the world best score with my CPU and GPU combo by 22% with the changes. I am getting 125 FPS in battlefield at 1440p 143 FPS at 1080p before making any changes I was getting 75 FPS at 1440p. and 110 FPS at 1080p A big improvement Thank you very much.
Hitting apply will restart windows and save the values in BIOS. No clue how you are able to increase/decrease PPT/TDC/EDC while running cb. Maybe the newer ryzen master is working better/easier, i dont know.
I tried to follow this guide but Ryzen Master is asking for restart after every single change... there's no way I can do this this way. Anyone knows how to make it stop asking for restart?
because of this explanation, I have the guts to finally undervolt my 5950X. I just wonder, if the boost of gaming you mention will be the same as IA generators and creators workflow like video editing.
I'm running a 3600 on a B450 Tomohawk MBO. I'm still using the stock CPU cooler. I heard you mention you are running a water cooler. Are there any limits of how far I should be pushing adjustments? Great guide, btw. I have been using Ryzen Master to monitor temps for awhile. I did not realize it had this tuning potential though.
Stock cooler is only going to give you a little more head room. AMD built it to cover 99% of CPUs. If you can afford it look at the noctura or Dark Rock series of air towers. I used the Dark Rock Pro 4 for months before moving to water and it was great. As for settings, keep an eye on your temps. The CPU will self manage but if you want good performance you can't keep hitting the thermal throttle point. CBR23 will definately help dial those numbers in because if you see 85+ you know you are at the boost limit by that point. And if you have a good, stable frequency too, then you are at the limit.
Which score did you get ? Personally I can’t get more than 4000ghz at 98% on Pbt Tdc… Also I can’t find the PBO curve optimizer in order to adjust the magnitude. Any advice ?
@@wanted4576 Hey, forgot I ever dropped this reply. Since I posted this, I moved away from Ryzen Master since it overrides the BIOS. I upgraded my CPU cooler to a Cooler Master MA410M. For my R5 3600, I'm running a manual BIOS OC at 4.2 GHz with a slight undervolt now. It's been great. I upgraded my GPU to a 6900 xt, which is beginning to bottleneck my CPU tho. Next upgrade is a R7 5800x3D. I'll probably go with a PBO/curve optimizer OC with that. Zen 3 chips supposedly perform better with PBO.
@@tribalicone2871 Well, thank's for the quick reply 😁. I just don'tknow how you guys can undervolt your CPUs. I tried several times with my B450 aorus elite and it just crashed every time. Currently I overcklocked the r5 3600 to 4.1ghz with a dynamic vcore +0.280V (I can't find a way to adjust the Vcore directly in the BIOS and the auto mode is less performant). Because of the poor performance of my ryzen I think I'm gonna get a new motherboard/CPU after this summer, with the arrival of the new gens. 😅 I'm expecting something great from the 7 gens of AMD
didn't work in my old x370 mainboard. PBO seems to be fixed at a maximum of +200mhz. But i was able to set an all-core Turbo of +300mhz, by using a large part of the video. Pretty cool, thanks
When testing the different curve optimization values, do I have to wait for each cinebench test to completely finish?? Or as long as it doesn’t crash when I start I can move onto the next test?
So when I enable PBO in Ryzen Master, it automatically sets it to "1,200". Is that 1200 % or 1200 Mhz, or what? Same with TDC=540, EDC=600. Are my numbers different because I'm on a 3700X? (I don't have a Curve Optimizer since that's only for 5000 series)
That was happening to me with the gigabyte x570 master. I just followed the tutorial and changed the values according to the percentages. I ended up with PPT 219 (~%98) TDC 153(~%99) EDC 147 (~%101) at about 84 degrees.
is there any difference if you find the PBO limits before the Curve Optimizer? I've seen a couple respect guides that do it in that order. Oh and what about the 200mhz boost? It's just optional and not included in this quick overclock? Thanks! 🙏
The date of this seems recent, 2021, but the screens and functions or Rosen Master is very different now. May I also request Threadripper info get add to this series? Please 😇
Just now realizing how much performance I've been leaving on the table. I thought that with Ryzen master, it was one stop and done. Other videos failed to mention going back into BIOS.
@GrayingTech, fantastic tutorial, quick question. When I run cinebench I'm unable to use/tweak ryzen master due to the system being used 100%. I mean the ryzen master screen is lagging behind like 20 secs, so impossible for me to tweak on the fly, same with any windows I open such as task manger etc. I'm running 5800x, 32gb trident z neo and 3080 so shouldnt be any issues. Seems you are able to run cinebench without any windows open freezing or lagging - What could be the issue for me?
@@mattsobrower5365 I had the same issue on Asus Dark Hero, I did find it by using the search function in BIOS. It "should" show up if you go to Advanced/AMD Overclocking. Click Accept. It should show up afterward under Advanced
Hello, I have no "curve optimizer" option on 3950x aorus x570 master bios f36. I have looked every where, there is a empty space where its suppose to be. Someone please advise.
What I don't understand is.. After I have selected the curve optimiser numbers in bios, when I click default profile in Ryzen master it wants me to restart the pc... But then I've noticed in the bios it then puts my curve optimiser back to auto... Really really annoying.
Hi I'm I have followed your video but Ryzen master will not allow me to change any of the PPT, TDC or EDC. I can enter the number but as soon as I click apply it switches to the original numbers. It will only allow for the numbers to be reduced not increased. Any advice please? 5900x, dark hero motherboard, dominator platinum cl16 3600 (4 x 8gb).
@@TheGrayingTech hi thanks for the reply as in my reply above unless it is entered and changed in both pbo and pbo 2 it will not work, problem solved but it is not something I have seen mentioned on any Ryzen oc videos.
@@leebookless7305 Wow I actually have the same issue. Can't change ppt,tdc,edc in Ryzen Master to do real time testing. I've had to reset and manually put in the numbers in bios and test each setting (very time consuming over changing these settings in Ryzen Master). 5900x, taichi x470, cl14 3200(4x8gb)
@@Lotsurc hi I am not sure if this will apply to your board or bios but with the Asus bios there was two pbo setting one with curve optimiser and one with out, normal pbo and pbo 2. I had to make sure that both of these were set exactly the same to make any changes but only pbo2 has the curve optimiser. Hope this helps.
Hi. performing this on an AMD Ryzen 9 3950X 16-Core Processor and using PPT=75 at 83%, TDC=50 at 56% and EDC=50 at 56% core #1 is 2780+- htz but the other cores are in the 1700-2000 range. I am almost at the lows of allowable PPT TDC EDC and the cores are not being pushed (running multi-core Cinebench 10 min duration test. not sure what to do next to get more out of my cores........thru out this my temp has stayed below 52C. any help appreciated. even willing to pay for a one on one session to optimize.
Can't do personal setups (legal & liability reasons, namely, I don't have insurance in case I break something). However, why are you going lower on the value? Are you seeing improvements in dropping the values? The 3950x should follow the same pattern as the 5950x; namely, higher PPT (200-210) and matching TDC & EDC (140-145 or so).
I have a Asrock B450 motherboard and when I go to AMD overclocking I do not see curve optimizer when setting to enable or advanced , everything else is there though .
Am I missing something or you have to restart the system every time you want to tweak the power values? This is so dumb. >.< edit: PBO2Tuner let's you do this.
Hello, I have the TUF Gaming B550-Pro with a Ryzen 7 3700x CPU, I just updated my BIOS, and updated all my windows drivers. Yet when I go under advanced I still can't find the Curve Optimizer. I am certain I am in the right place, curve optimizer just doesn't show up. Is it because of the motherboard I own? I am very confused.
Great video but I think i have missed something .... I have tried following but when I get to the "Tuning PPT" section of the video , no matter what values I put in in Ryzen Master , I cant get the cores to go above 4000 ?? Are we supposed to changed anything in the Precision Boost Overdrive area in the advanced part of the bios before we do this , or just leave it set at ... PBO Precision Boost Overdrive .............. Advanced PBO Limits ....................................... Auto Precision Boost Overdrive Scaler .... Auto Curve Optimizer Platform Thermal Throttle Limit ...... Auto I have a Ryzen 5900X and an ASUS Prime X570-PRO with 32GB Corsair Vengeance RGB Pro SL Thanks
Tried this but does not work on Ryder 7800x3d cpu.. makes it waaaay slower. Went from 5.1 to 4.3 with the timings suggested.. anyway to actually OC this cpu using this software?
Awesome Vid mate! Very easy to follow! I just have 1 question tho; I have a 5800X and a Corsair AIO. I don't crash with a -30 in CO. When trying to tune PPT/TDC/EDC, it looks like I can't go beyond the defaults as all 3 are sitting at ~96%. None of the 3 are maxed out! If I increase any numbers, no matter which, nothing happens. However im at 4.97ghz.
R5 5600x, Well I turned PBO first qnd then increase black from auto/100Mhz too 102 and get 4.96Gz (goes around 1.4Vcore) one core boost and 4.8Ghz all cores boost (with 1.3Vcore avg) idle 0.99Vcore. Gain 5fps avg more in warzone2 over manually overclock 4.85Ghz on 1.41Vcore. I have passed 5Ghz with 103Mhz black × auto with 4.9Ghz all cores was unstable because of my enoying ram memmory. Temp for my CPU around 66C while gaming and 72 on Cinebench r23 30min stability test. When I get home from holiday I will try to lower my mem from 3260Mhz to 3060Mhz and go for 103Mhz to get 5Ghz. I have tried 104 black with +200Mhz boost pbo but black screen. My old back in the day i7-4770k was 120Mhz black × 39 to get almost 5Ghz on my old i7 but performance was like a r5-1600x. I have owned 1600x and was clocked to 4.3Ghz with air cooler and avg temp was 90C and max 107C temp. I did not push my old 2600 non x and was clocked low
Everytime I try to make a change to PPT, TDC, or EDC ryzen master requires a restart of my pc which resets the things I the negetive 25 in the bios I was able to set. Any idea why? I can still do everything, it's just very annoying to reset my pc twice just to change ppt, tdc, or edc.
Im using a ryzen 9 5900x the question I have is in the video states you can't use curve optimizer beyond -30 but I managed to have a stable -35, could I use that? if so would it be of a benefit?
I cant really find the curve optimiser, i only have precisioj boost overdrive scalar/ max cpu boost clock override and platform thermal throttle likit in pbo bios, and the pbo limits above
My pc wants to restart after i start applying anything in ryzen master and click "apply". Any ideas how to get around this ? In the tut he can adjust settings and click apply and continue testing afterwards.
I just wanted to say I like your content. I'm an Engineer at AMD. Great job with the Ryzen Master tutorial.
Hey could you possibly help me with a question I have?
Im running a 5700x on a Asus ROG Strix b550 motherboard.
Im confused why ryzen master displays PPT 1000W peak levels?
For example at idle it shows 3% of 1000W PPT.
Also, TDC shows readings around 0-1% of 1000A.
EDC appears to be normal though, showing 3% of 180A.
Is there a way I can fix this so it displays proper readings?
@BrockSuire75
BrockSuire75 ^^^^
Criminally underrated tech channel. Just stumbled upon it while waiting for my new Ryzen CPU to arrive and binged all the cpu/ram overclocking videos, and then some more xD. Love the detailed explanations and loads of practical advice. It's a shame I hadn't found this channel earlier, would've made a better choice when picking my RAM :) Keep up the awesome work, you deserve more subs!
Crystal clear step-by-step guide. Your way of explanation reminds me those few great teachers I encountered with over my past decades. Great content, fluent and catching presentation, very well done! Thanks!
Most clear video about this subject that i have ever seen, thanks! Finally overclocked my 5950x properly.
This is the most information packed and usefull video about ryzen master tuning I have ever watched. I will start optimising my ryzen system immediately. Great work!!
Any idea why curve optimization isn't an option in my bios? It's updated to the newest one. I don't know what the problem is.
@@al3xb827 depends on chipset make/model of motherboard, i believe it's paywalled it's advanced tuning so you would have to buy pricy overclocking capable motherboard.
when creating a default profile like at 8:30 I get prompted with a restart request with changes CO - All cores. What am I doing wrong? If I accept id deactivates my Curve Optimizer again...
Same
Don’t hit apply and restart, just run the cinebench test
No need to create a default profile only the pbo profile
Hi update from from last message you have to also enable pbo in extreme tweaker then it allows you to alter in Ryzen master also worth noting that the changes in bios to ppt ect will not take affect unless they are also entered in both pbo in the BIOS. Maybe this may help others that have had the same issue.
Good call out.
This was not the case for me tbh, i never touched PBO settings in extreme tweaker.
Great tutorial! I will finish my 5600x build today and going to inmediately do this!
So I’m good up until about the 11:30 mark or so. My 5800x can run on -25. I created a new profile to turn on pbo so I could adjust the individual dials, but Ry zen master tells me it requires a restart. I hit ok. And then it turns off curve optimizer. My offset goes away. What am I doing wrong?
For those having issues with Ryzen Master requiring a restart after changing the PPT/TDC/EDC settings: In the new Ryzen Master it's a bit different. Once you have set those three values, below you'll see a row called "Curve Optimizer Control" and there you need to select Per Core and enter the curve settings which you have defined in an earlier step. This way you can keep the Curve Optimizer and the manual PPT/TDC/EDC settings. Still will require a restart though, I guess that's a thing with the updated Ryzen Master.
That happens to me when I select default and hit apply. It makes me restart and reset the settings in the first part of the video
@@DeafEcho27 PBO2 Tuner let's you modify all these values without the need for restart.
Thank you very much for this video. I'm not the most tech-savvy pc user out there but you explained everything very well here
It gave my 3900x a nice performance boost
Cheers from Denmark
WOW thank you so so much this is the guide I needed as I now can tell what are all those values and how to use them.
Im absolutely obsessed for this Channel, Just luv Ryzen tunings.
Best channel on how to overclock my 5950X thank you so much
Thank you so much for the answer of question of all questions...that i can / should do both...curve AND pbo!!!
first of all, love the video and it's awesome you did this. has helped me a lot and from looking at the comments, be proud of making this video and that even 2 years later it's STILL helping.
figured since i would start tweaking my CPU's and have used this video and methods to tune my 3 CPU's, 5600x, 5700x and 5800x3D have significantly reduced temps and gotten better performance on all of them. all CPU's i was easily able to do negative 30 for the offsets. sadly with my 5800x3D CPU Ryzen Master will not work with tweaking like this, so i had to do the fine tuning in the BIOS of my aorus master b550, took a lot of restarts, but finally got my temps reduced by almost 20c... and got my full load clocks from default, an inconsistent 4.366 area to a constant 4.449
for my 5800x3D these are where i stopped
PPT = 93% @95w (Default was 142w)
TDC = 96% @65a (Default was 95a)
EDC = 100% @100a (Default was 140a)
i could easily play with these more. but i figured this was a good stopping point for now. i will edit this if anything more happens or i come across anything else.
EDIT: started testing temps for the hell of it, using the furmark 1 and 2 CPU burner for max temps, the max my CPU got after doing this was 75c on an AIO cooler for about an hour, before with default settings and nothing touched i was hitting about 86c if not more(didn't do longer than 5-10 minutes on default because of how fast the temps shot up.). definitely more beneficial to do this on the 5800x3D, the other CPU's it did help as well, just not THIS significantly...
Any idea why curve optimization isn't an option in my bios? It's updated to the newest one. I don't know what the problem is.
@@al3xb827 depending on the motherboard you may have to find how to edit or enable it. Usually googling your motherboard will help. I'm using for my stream pc a aorus b550 pro and then a master version for my main PC. Most of the stuff is similar for my motherboard from this video but differently worded. some things gotta go a different route to get there.
@@bobcamoh.a.f.2874 ok thanks. I have a B450 but it still should work. Right?
@@al3xb827
again, idk which mobo it is, not hard to look up though, does show some can, i don't know if all can. just type in your mobo and then "curve optimizer" or "how to enable curve optimizer" or something similar, should be able to find it. i do remember some lower end mobo's couldn't do a whole lot like that unless you had beta BIOS installed. but that could be for specific CPU's and mobo venders...
@@al3xb827
replying again just in case as it doesn't show i replied...
idk, you would have to look it up. i still don't know the mobo you have. but just google your mobo with "curve optimizer" or "how to enable curve optimizer" then you should be able to find something on how to do it if your able too.
Can we PLEASE get an updated guide for the new Ryzen Master that requires a restart after every change? I sorta fucked with my computer and i regret even messing with ryzen master because now it didnt boot
You can save it, find a tutorial for resetting bios, It happened to me once when I first tried and there is supposed to be a manual way of restarting your bios IRL if it won't boot
Amazing tutorial, well spoken, and clear.
This vid helped me the most so far in 2024 - I can now feel safe using PPT 180 EDC 155 TDC 145
Everything is within acceptable limits and I'm not even hitting 80c - A very kind 3% more in both ST and MT according to CPU-Z - Liquid Cooler 340mil NZXT.
I don't know if I'm going to pass a mem read test yet using unlocked AIDA64 Extreme listed in Armory Crate free utilities. If sensor panel=ON - Renaming files is dodgy.
Chasing the Holy Grail of eye candy and performance. Such is the life of a Technophile. A Gen X Shalomie Like me doesn't mind if they get caught skulking around the grey tech yard.
Clear and simple guide. Wish you would have shown before and after performance results though to reinforce your claims.
Thanks. Here are the benchmark runs. th-cam.com/video/DGsk8QNTJiY/w-d-xo.html
Sadly my 5800x doesn’t seem to hit 100% PPT or TDC even with a curve offset of negative 25. Tried playing with the values to get them closer to 100% but didn’t record any difference in frequency. I did, however, notice that dropping EDC from 140 to 120 gave me an increase to my frequency. Now running 142 / 95 / 120 but was able to add +100 MHz in the BIOS as well. Guess luck of the draw wasn’t on my side.
@@CoercedNut are you saying you want to lower these 3 numbers as close as you can so when under full load they're at 100/100? Does making your PC use 100% of the limit somehow increase performance or something?
*slams desk*
THANK YOU!!!
Subscribed. Awesome stuff.
Two Things
First, I just launched my new motorcycle channel. Please give it a sub so I can get a custom URL. It is focused on returning to motorcycling after a 7 year break.
th-cam.com/channels/PrS9ZDxFoTrmvTShipB64w.html
Second, this is a re-post. Folks didn't like how I ended the previous video, so I added some conclusion content to this one. TH-cam doesn't allow you to append a video, so I had to start from scratch. Hopefully this clarifies what to do.
Sooooo useful and well described. Thank you!!
I did all this tuning but clocks are still not going over 3,8Ghz on my 5700x ?
Really enjoy your videos. Great quality. Keep going, you will be huge when one trends.
Wow, thank you!
every time I try to apply a different profile in Ryzen Master it prompts me to restart so it can enable CO - All Cores. At which point the Curve optimization in the BIOS is disabled. Not really sure what to do at this point.
Same here!
Getting boost up to 4.91ghz on my 5600x using pbo2 with curve optimizer and using motherboard for pbo limits Aorus b550 pro v2. Usually at 4.85ghz most of the time though. Temps never over 77c during benchmarks and 67c during gaming with Corsair h100i Aio.
what values did you use? I have the same CPU and AIO cant seem to hit that frequency no matter what I try
@NagoyaR that`s what I too know too! afaik you can only get 200Mhz more with POB alone, and thats if you activate the Boost Override option all the way up
@@joak-web Well I 100% get 4.91Ghz during single core workloads. I have seen it in HWinfo64 and Hwmonitor. All silicion is not equal. And im not the only person with a 5600x that has achieved these speeds either.
R5 5600x, Well I turned PBO first qnd then increase black from auto/100Mhz too 102 and get 4.96Gz (goes around 1.4Vcore) one core boost and 4.8Ghz all cores boost (with 1.3Vcore avg) idle 0.99Vcore.
Gain 5fps avg more in warzone2 over manually overclock 4.85Ghz on 1.41Vcore. I have passed 5Ghz with 103Mhz black × auto with 4.9Ghz all cores was unstable because of my enoying ram memmory. Temp for my CPU around 66C while gaming and 72 on Cinebench r23 30min stability test.
When I get home from holiday I will try to lower my mem from 3260Mhz to 3060Mhz and go for 103Mhz to get 5Ghz.
I have tried 104 black with +200Mhz boost pbo but black screen.
My old back in the day i7-4770k was 120Mhz black × 39 to get almost 5Ghz on my old i7 but performance was like a r5-1600x.
I have owned 1600x and was clocked to 4.3Ghz with air cooler and avg temp was 90C and max 107C temp. I did not push my old 2600 non x and was clocked low.
There are some kind of bugg in some motherboard thqts alow you to get +300Mhz out of PBO but did not work for me, non k intel CPUs had overlook too because of bugg. Depending on bios.
I followed the guide so far, and was able to get to -30 with my 5800X and a Darkrock Pro 4! Time to follow the rest of the guide. I just hope it addresses single-core loads like CSGO and not well-balanced multi-threaded loads like cinebench.
How'd you go with that for csgo?
@@buck3t_ not sure. Any time I tried to select a specific per-core offset for my two strongest cores, the fps dropped. So I just left It at -25 for all cores
@@recnepSpencar I've been trying to find out how to oc my 3300x and all I found till now was all core oc's. This looked a lot more promising than just my auto oc 200 boost... I think i get 4500mhz ish on 1 core... Everything else is pretty much stock tho
@@buck3t_ Just know that combo of precision boost overdrive and curve optimizer is limited to Ryzen 5000
@@recnepSpencar ahh damn well I guess i can still try and tweak the other settings...
Very well explained 👌.
Hope you will do an updated tutorial with a 7900x cpu.
amazing, cant wait to get home and try this out.
ps. watched this right after the AMD GPU tweak video that you made
Thank you sir
R5 5600x, Well I turned PBO first qnd then increase black from auto/100Mhz too 102 and get 4.96Gz (goes around 1.4Vcore) one core boost and 4.8Ghz all cores boost (with 1.3Vcore avg) idle 0.99Vcore.
Gain 5fps avg more in warzone2 over manually overclock 4.85Ghz on 1.41Vcore. I have passed 5Ghz with 103Mhz black × auto with 4.9Ghz all cores was unstable because of my enoying ram memmory. Temp for my CPU around 66C while gaming and 72 on Cinebench r23 30min stability test.
When I get home from holiday I will try to lower my mem from 3260Mhz to 3060Mhz and go for 103Mhz to get 5Ghz.
I have tried 104 black with +200Mhz boost pbo but black screen.
My old back in the day i7-4770k was 120Mhz black × 39 to get almost 5Ghz on my old i7 but performance was like a r5-1600x.
I have owned 1600x and was clocked to 4.3Ghz with air cooler and avg temp was 90C and max 107C temp. I did not push my old 2600 non x and was clocked low
Outstanding material, thanks for sharing.
just got the 5800x. This still applies. Thank you.. New Sub!!!!
What's your max setting that's comfortable for you?
@@catalystJJ I have the Curve Opt at neg 20
PPT 105
TDC 85
EDC 30
I have a 360EK aio
Running Cinabench I boost to 4716 all cores.
Core temps settle at 76.c after 20mins
Hope that helps
Thats 80 on the EDC lol
It wants me to restart PC after each change and it also resets my curve optimizer settings everytime this is so frickin annoying
@Collin Lutz it reseted the curve optimizer settings that I manually set in bios settings so I have no clue
@Collin Lutz it does what it wants even if I didn't set it myself, it underclocked my ram for no reason, it reseted my CO settings, I can't even apply anything because it always wants to set Auto OC mode but nothing happens after the reset and it still wants to apply the Auto OC over and over again even if it already is set on Auto OC
@Collin Lutz I am having a terrible experience with Ryzen Master and I have no idea why bcs everywhere I looked it worked and it doesn't even give me an error or anything
How do I make it so when ever I make changes it doesn’t restart my computer
Great guide. Just what I needed! Thanks!
I tried doing this but every time I try to do an adjustment, it restarts and you're don't. What am I doing wrong?
Great video used to this overclock my 5900x 🙏 no problems and just improvements
Same, so far up to 4.7 on all cores at 75c. Not sure I want to go higher but I might :)
Each time I try to apply the settings, it forces me to reload and then still wont apply them, help!
Thanks for the video!
Quick question, when I try to change the PBO values in Ryzen Master it asks to restart my PC and turns of the Curve Optimiser.
Am I doing something wrong or is there another setting I have missed?
Same here
@@steveburke3 I found that once I had set my PBO values in bios then applied the CO, the values held.
@@tokzin3598 I had to use a different profile for all my settings to hold.
Stop use software and use bios
This was an awesome tutorial. Thanks a lot!
my PPT says 1000 on Default? 5 5600X?
Unfortunately, this video might be outdated. When you load up a default profile it disables the optimized curve and forces a restart.
I have a threadripper 2950x and don't have a curve optimizer option anywhere in my Asus Zenith Extreme motherboard bios. I'm trying to (ironincally) optimize single core performance to enhance my iRacing sim experience. Any suggestions would be greatly appreciated. If helpful, i run iRacing with a Nvidia 1080Ti and HP Reverb G2 VR headset with 64gb of RAM.
If you want higher clocks, you dont need to increase TDC or EDC. My Ryzen 5900x is running CO + disabled PBO limits and it clocks 4.4ghz allcore on a max power draw of 142w, with single thread being 4.95ghz.
I don't know who told him to go through all that crap for an overclock but he is getting bad results with all that work.
@@r0aver curve optimizer
R5 5600x, below 130W and 4.96Ghz boost with 4.8Ghz all cores.
Well I turned PBO first qnd then increase black from auto/100Mhz too 102 and get 4.96Gz (goes around 1.4Vcore) one core boost and 4.8Ghz all cores boost (with 1.3Vcore avg) idle 0.99Vcore.
Gain 5fps avg more in warzone2 over manually overclock 4.85Ghz on 1.41Vcore. I have passed 5Ghz with 103Mhz black × auto with 4.9Ghz all cores was unstable because of my enoying ram memmory. Temp for my CPU around 66C while gaming and 72 on Cinebench r23 30min stability test.
When I get home from holiday I will try to lower my mem from 3260Mhz to 3060Mhz and go for 103Mhz to get 5Ghz.
I have tried 104 black with +200Mhz boost pbo but black screen.
My old back in the day i7-4770k was 120Mhz black × 39 to get almost 5Ghz on my old i7 but performance was like a r5-1600x.
I have owned 1600x and was clocked to 4.3Ghz with air cooler and avg temp was 90C and max 107C temp. I did not push my old 2600 non x and was clocked low
very good channel, well explained
The UI on Ryzen master looks very different from your video, can you make a new video or please show or link the download that you use? Please help!
If still needed when first open click advance then go into the settings and put histogram on
When I am tuning it, my cpu doesn't go up in terms of MHz, it stays at 4.1 and never goes up, but in the ryzen master it says that the max is 4.4, is there any problem here?
This video is so useful. For my 5600x, I'm using -30 all cores, 110w ppt, 65A TDC, 110A EDC
why i can't enable ryzen master overclocked bro??i have 5600x cpu too
when i try and go higher than 78 it auto resets it to 78. any ideas?
for ppt
Nice! Im a noob at oc'ing a cpu, and this helps me alot.
Looking forward to some fiddeling later tonight.
Also habe to check out the extended vid og ryzen master. Thanks !
Good luck!
@@TheGrayingTech I fiddeld so much I had to do a cmos reset.. now my network card wont work with ethernetcable. "Commom" problem with Realtek 2.5gb.
Luckily, retailer said they'll give me a new mobo... I just have to send in my old one first 🤣
Hey! I have a Tuf Gaming motherboard. And I am looking for Curve optimizer and I don’t see it? Is there any alternative names for it? Or does my mother board just not have it? Thanks
(I also have a 3700x if that changes things?)
what a great video, thanks!!
When I run Ryzen Master, and click Apply under Creator tab, it says "Following configuration requires Ryzen Master to Restart Windows, then Ryzen Master will automatically open. *CO-All Cores. Do you want to apply now". And if I hit yes, it restarts and puts Curve Optimizer in BIOS back to defaults. Also, I have a Ryzen 7 5700X(65w), Ryzen Master shows TDC and EDC values of 60A and 90A as you said, but under PPT it shows a value of 76A and not 88A as you said, I take it 76A is the correct value for the 5700X ?
do you know how to fix it?
Awesome guide and explanation.
EDIT: Used this guided 2 years ago when I updated my Ryzen CPU to 5700X. Running on an older ASUS Strix Z470 with bios updated to latest 9-23 version which adds support for 5 & 7 series CPUs. Updated Ryzenmaster and discovered Curve Optimizer. Would love to see an update addressing this feature for newer AMD processor tuning.
His method partially works now.
Example when hitting the apply button it will restart and save to bios.
Can't change pbo limits on the fly like he did with cb23 and ryzen master.
Did you managed to change things like in this video?
Hi TheGrayTech
I followed this tutorial, and this is what I got in CB scores stock test 5940 test with EDC at 51 from 31 8502 following the tutorial making all the relevant changes on my 7th test got a stable score of 9045. my CPU is having follows below.
Processor AMD Ryzen 5 3600 6-Core Processor 3.60 GHz
Installed RAM 16.0 GB
System type Windows 11 pro-64-bit operating system, version 23H2 x64-based processor
Is this good or should I run more tests I haven't had crash's yet, but I don't want to push my Louk has this seems like a big jump from stock. Or is this normal.
PS I continued with this still no crashing and I have a score of 9272 so I ran 3Dmark and beat the world best score with my CPU and GPU combo by 22% with the changes. I am getting 125 FPS in battlefield at 1440p 143 FPS at 1080p before making any changes I was getting 75 FPS at 1440p. and 110 FPS at 1080p A big improvement Thank you very much.
Hitting apply will restart windows and save the values in BIOS.
No clue how you are able to increase/decrease PPT/TDC/EDC while running cb.
Maybe the newer ryzen master is working better/easier, i dont know.
I tried to follow this guide but Ryzen Master is asking for restart after every single change... there's no way I can do this this way. Anyone knows how to make it stop asking for restart?
Same here
What made you go back and drop down below 160 when you were done optimizing? Did I miss something important?
I installed a new 5700x yesterday. It turned out to be really really easy. I overclocked it to 4.75 Ghz.
Have the same cpu. whats your settings? thanks
I downloaded Ryzen Master and set to auto overclock and ran the curve optimizer (it will take a while to set the required settings)@@menmabmx1995
because of this explanation, I have the guts to finally undervolt my 5950X. I just wonder, if the boost of gaming you mention will be the same as IA generators and creators workflow like video editing.
I'm running a 3600 on a B450 Tomohawk MBO. I'm still using the stock CPU cooler. I heard you mention you are running a water cooler. Are there any limits of how far I should be pushing adjustments? Great guide, btw. I have been using Ryzen Master to monitor temps for awhile. I did not realize it had this tuning potential though.
Stock cooler is only going to give you a little more head room. AMD built it to cover 99% of CPUs. If you can afford it look at the noctura or Dark Rock series of air towers. I used the Dark Rock Pro 4 for months before moving to water and it was great.
As for settings, keep an eye on your temps. The CPU will self manage but if you want good performance you can't keep hitting the thermal throttle point. CBR23 will definately help dial those numbers in because if you see 85+ you know you are at the boost limit by that point. And if you have a good, stable frequency too, then you are at the limit.
Using the same can't find all bits settings like the first ram setting and the amd over clocking
Which score did you get ? Personally I can’t get more than 4000ghz at 98% on Pbt Tdc…
Also I can’t find the PBO curve optimizer in order to adjust the magnitude.
Any advice ?
@@wanted4576 Hey, forgot I ever dropped this reply. Since I posted this, I moved away from Ryzen Master since it overrides the BIOS. I upgraded my CPU cooler to a Cooler Master MA410M. For my R5 3600, I'm running a manual BIOS OC at 4.2 GHz with a slight undervolt now. It's been great. I upgraded my GPU to a 6900 xt, which is beginning to bottleneck my CPU tho. Next upgrade is a R7 5800x3D. I'll probably go with a PBO/curve optimizer OC with that. Zen 3 chips supposedly perform better with PBO.
@@tribalicone2871 Well, thank's for the quick reply 😁. I just don'tknow how you guys can undervolt your CPUs. I tried several times with my B450 aorus elite and it just crashed every time.
Currently I overcklocked the r5 3600 to 4.1ghz with a dynamic vcore +0.280V (I can't find a way to adjust the Vcore directly in the BIOS and the auto mode is less performant). Because of the poor performance of my ryzen I think I'm gonna get a new motherboard/CPU after this summer, with the arrival of the new gens. 😅 I'm expecting something great from the 7 gens of AMD
didn't work in my old x370 mainboard. PBO seems to be fixed at a maximum of +200mhz. But i was able to set an all-core Turbo of +300mhz, by using a large part of the video. Pretty cool, thanks
When testing the different curve optimization values, do I have to wait for each cinebench test to completely finish?? Or as long as it doesn’t crash when I start I can move onto the next test?
So when I enable PBO in Ryzen Master, it automatically sets it to "1,200". Is that 1200 % or 1200 Mhz, or what? Same with TDC=540, EDC=600. Are my numbers different because I'm on a 3700X? (I don't have a Curve Optimizer since that's only for 5000 series)
That was happening to me with the gigabyte x570 master. I just followed the tutorial and changed the values according to the percentages. I ended up with PPT 219 (~%98) TDC 153(~%99) EDC 147 (~%101) at about 84 degrees.
is there any difference if you find the PBO limits before the Curve Optimizer? I've seen a couple respect guides that do it in that order. Oh and what about the 200mhz boost? It's just optional and not included in this quick overclock? Thanks! 🙏
The date of this seems recent, 2021, but the screens and functions or Rosen Master is very different now.
May I also request Threadripper info get add to this series? Please 😇
Very helpful video. Thank you
Just now realizing how much performance I've been leaving on the table. I thought that with Ryzen master, it was one stop and done. Other videos failed to mention going back into BIOS.
Loving your content!
Thanks, I appreciate it.
It keeps wanting me to to reset my windows?
Any idea why curve optimization isn't an option in my bios? It's updated to the newest one. I don't know what the problem is.
@GrayingTech, fantastic tutorial, quick question. When I run cinebench I'm unable to use/tweak ryzen master due to the system being used 100%. I mean the ryzen master screen is lagging behind like 20 secs, so impossible for me to tweak on the fly, same with any windows I open such as task manger etc. I'm running 5800x, 32gb trident z neo and 3080 so shouldnt be any issues. Seems you are able to run cinebench without any windows open freezing or lagging - What could be the issue for me?
I don't see curve optimizer in bios. Have everything else but the curve optimizer??Asus tuf x570
upgrade bios
@@OskyContrerasJ I have the latest. As far as asus website says.
Advanced \ AMD Overclocking \AMD Overclocking \ Precision Boost Override \ Curve Optimizer
@@OskyContrerasJ sadly no curve optimizer in the menu stated above
@@mattsobrower5365 I had the same issue on Asus Dark Hero, I did find it by using the search function in BIOS. It "should" show up if you go to Advanced/AMD Overclocking. Click Accept. It should show up afterward under Advanced
Hello, I have no "curve optimizer" option on 3950x aorus x570 master bios f36. I have looked every where, there is a empty space where its suppose to be. Someone please advise.
My BIOS has no curve optimiser
Mine as well. Not sure if updating bios will show it.
Super helpful, cheers buddy
Glad it helped
What I don't understand is.. After I have selected the curve optimiser numbers in bios, when I click default profile in Ryzen master it wants me to restart the pc... But then I've noticed in the bios it then puts my curve optimiser back to auto... Really really annoying.
Same here
It sadly says that the overclocking option is not available on my computer
Hi I'm I have followed your video but Ryzen master will not allow me to change any of the PPT, TDC or EDC. I can enter the number but as soon as I click apply it switches to the original numbers. It will only allow for the numbers to be reduced not increased. Any advice please?
5900x, dark hero motherboard, dominator platinum cl16 3600 (4 x 8gb).
You have the right board for it, make sure PBO2 is enabled in the BIOS. What happens when you press apply & test?
@@TheGrayingTech hi thanks for the reply as in my reply above unless it is entered and changed in both pbo and pbo 2 it will not work, problem solved but it is not something I have seen mentioned on any Ryzen oc videos.
@@leebookless7305 Wow I actually have the same issue. Can't change ppt,tdc,edc in Ryzen Master to do real time testing. I've had to reset and manually put in the numbers in bios and test each setting (very time consuming over changing these settings in Ryzen Master). 5900x, taichi x470, cl14 3200(4x8gb)
@@Lotsurc hi I am not sure if this will apply to your board or bios but with the Asus bios there was two pbo setting one with curve optimiser and one with out, normal pbo and pbo 2. I had to make sure that both of these were set exactly the same to make any changes but only pbo2 has the curve optimiser. Hope this helps.
Hi. performing this on an AMD Ryzen 9 3950X 16-Core Processor and using PPT=75 at 83%, TDC=50 at 56% and EDC=50 at 56% core #1 is 2780+- htz but the other cores are in the 1700-2000 range. I am almost at the lows of allowable PPT TDC EDC and the cores are not being pushed (running multi-core Cinebench 10 min duration test. not sure what to do next to get more out of my cores........thru out this my temp has stayed below 52C. any help appreciated. even willing to pay for a one on one session to optimize.
Can't do personal setups (legal & liability reasons, namely, I don't have insurance in case I break something). However, why are you going lower on the value? Are you seeing improvements in dropping the values? The 3950x should follow the same pattern as the 5950x; namely, higher PPT (200-210) and matching TDC & EDC (140-145 or so).
Why does enabling pbo on the Ryzen master app restart my computer? Then I go back into bios and the curve is disabled.
whats the difference between doing this, and doing it in the bios?
I have a Asrock B450 motherboard and when I go to AMD overclocking I do not see curve optimizer when setting to enable or advanced , everything else is there though .
Which CPU do you have? Curve Optimizer is still limited to the 5000 series at this time.
@@TheGrayingTech That's why ! I have a Ryzen 7 3700x on a Asrock B450 MB with a RTX3700 GPU .
@@TheGrayingTech so can i use the rest of the settings for my ryzen 5 3600?
I've went to amd overclocking precision boost overdrive changed it to advanced the option for Curve Optimizer isnt there bios version 4201
would it not be better to do the curve optimiser in the end so it does not limit the maximum overclock? since voltage is the base of overclocking
Am I missing something or you have to restart the system every time you want to tweak the power values? This is so dumb. >.<
edit: PBO2Tuner let's you do this.
Hello, I have the TUF Gaming B550-Pro with a Ryzen 7 3700x CPU, I just updated my BIOS, and updated all my windows drivers. Yet when I go under advanced I still can't find the Curve Optimizer. I am certain I am in the right place, curve optimizer just doesn't show up.
Is it because of the motherboard I own? I am very confused.
Great video but I think i have missed something ....
I have tried following but when I get to the "Tuning PPT" section of the video , no matter what values I put in in Ryzen Master , I cant get the cores to go above 4000 ?? Are we supposed to changed anything in the Precision Boost Overdrive area in the advanced part of the bios before we do this , or just leave it set at ...
PBO
Precision Boost Overdrive .............. Advanced
PBO Limits ....................................... Auto
Precision Boost Overdrive Scaler .... Auto
Curve Optimizer
Platform Thermal Throttle Limit ...... Auto
I have a Ryzen 5900X and an ASUS Prime X570-PRO with 32GB Corsair Vengeance RGB Pro SL
Thanks
did you ever get an answer?
Tried this but does not work on Ryder 7800x3d cpu.. makes it waaaay slower. Went from 5.1 to 4.3 with the timings suggested.. anyway to actually OC this cpu using this software?
Awesome Vid mate! Very easy to follow! I just have 1 question tho;
I have a 5800X and a Corsair AIO. I don't crash with a -30 in CO. When trying to tune PPT/TDC/EDC, it looks like I can't go beyond the defaults as all 3 are sitting at ~96%. None of the 3 are maxed out! If I increase any numbers, no matter which, nothing happens. However im at 4.97ghz.
Same problem
There's nothing to improve on if you're already hitting the max +200 speeds.
You won't get much better than that.
You can definitely get over 5Ghz with thqt CPU
R5 5600x, Well I turned PBO first qnd then increase black from auto/100Mhz too 102 and get 4.96Gz (goes around 1.4Vcore) one core boost and 4.8Ghz all cores boost (with 1.3Vcore avg) idle 0.99Vcore.
Gain 5fps avg more in warzone2 over manually overclock 4.85Ghz on 1.41Vcore. I have passed 5Ghz with 103Mhz black × auto with 4.9Ghz all cores was unstable because of my enoying ram memmory. Temp for my CPU around 66C while gaming and 72 on Cinebench r23 30min stability test.
When I get home from holiday I will try to lower my mem from 3260Mhz to 3060Mhz and go for 103Mhz to get 5Ghz.
I have tried 104 black with +200Mhz boost pbo but black screen.
My old back in the day i7-4770k was 120Mhz black × 39 to get almost 5Ghz on my old i7 but performance was like a r5-1600x.
I have owned 1600x and was clocked to 4.3Ghz with air cooler and avg temp was 90C and max 107C temp. I did not push my old 2600 non x and was clocked low
Is there any chance you have your RM Profile file from ryzen master so I can use it? I have the same cpu. Thanks! Already liked your content
Everytime I try to make a change to PPT, TDC, or EDC ryzen master requires a restart of my pc which resets the things I the negetive 25 in the bios I was able to set. Any idea why? I can still do everything, it's just very annoying to reset my pc twice just to change ppt, tdc, or edc.
Can you make an in depth guide like this on how to overclock your gpu with MPT?
Im using a ryzen 9 5900x the question I have is in the video states you can't use curve optimizer beyond -30 but I managed to have a stable -35, could I use that? if so would it be of a benefit?
Why cant i see the curve optimizer? I have a 3600xt and a rog b550 f gaming
my question is the negative 15 - if we set this higher does the OC go up even more ?
I found that my CPU can run using a -30 offset but gets better Cinebench scores at -25. Which offset should be used.?
I cant really find the curve optimiser, i only have precisioj boost overdrive scalar/ max cpu boost clock override and platform thermal throttle likit in pbo bios, and the pbo limits above
Yeah same, I think curve optimizer only works for zen 3 processors (I have a 3600xt which is zen2). So assuming u have a zen 2, that might be why
My pc wants to restart after i start applying anything in ryzen master and click "apply". Any ideas how to get around this ? In the tut he can adjust settings and click apply and continue testing afterwards.
When I put my PBO in advenced, dont show me the option of curve optimizer, what can I do?