Programmable multifunctional DC 12V 4-digit timer relay YYC-2S Delinx
ฝัง
- เผยแพร่เมื่อ 23 พ.ค. 2018
- easy to operate, www.amazon.com/Delinx-Program...
Programs list:
P-11 : triggered, on (non-locked mode)
P-12: triggered, on, triggered again, off (self-locked mode)
(P-13 to P-21 are delay modes)
P-13 : triggered, on, delay TA, off (triggered again in TA is invalid)
P-14 : triggered, on, delay TA, off (triggered again in TA, Recount-down TA )
P-15 : triggered, on, delay TA, off (triggered again in TA, count-down“ displaying time +TA” )
P-16 : triggered, on, delay TA, off (triggered again in TA, Reset, display----)
P-17 : triggered, on, delay TA, off (triggered again in TA is effective)
P-18 : Power on again, on, delay TA, off
P-21 : triggered, delay TA ,on
P-22: Triggered time more than TA, on
P-23: Triggered ,delay TA , not triggered again in TA, on
P-24: Triggered time more than TA, on, not triggered again in TB, off
P-25: Triggered time more than TA, on, Triggered time more than TA again, off
P-26: Triggered ,on , delay TA,off
P-27: if Triggered signal is pluse, off ( pluse cycle less than TA )
P-28: Power on again , delay TA, on , not off until power off.
P31-P33 are cycle modes
P-31: Power on again, Infinite cycle until power off : on, delay TA, off, delay TB
P-32: Triggered , Infinite cycle until power off: on, delay TA, off, delay TB
P-33: Triggered , Infinite cycle until triggered again : on, delay TA, off, delay TB
P-34: Power on again, delay TA, on, delay TB, off
P-35: Triggered, delay TA, on, delay TB , off
P-36: Triggered time more than TA, on, delay TB, off
P-37: Triggered, on, delay TA, off , delay TB (triggered is invalid in TA or TB)
P-38: Triggered, on, delay TA, off, delay TB, on, delay TA, off
valeu amigão aqui do brasil me ajudou muito. abraço.
Thank you!
Good video I like it
Can you help me?
what is the program if I just want to count the time the button is pressed (triggered)?
👍👍👍👍
Do you have a new link to the product as the current one is saying not available now.
Hello my friend, what is the maximum current of the piece and what is the current that it consumes when there is no load on it
If i use the same power supply for both ends (9v battery) will it burn anything out?
Is there a work in (time) after switch and stop after (time)
Is this dual channel output ? I want to control two different leds instead of one motor .
it is one channel output
Instead of a motor can it operate a solenoid?
Does it save the settings when supply is taken away?
yes,it is
how can I program it to work on hrs and minutes for example to star motor after hrrs and 30 mis for 15 second for example
Pls bro what is the work of that red bottle in you pressing
Good video!! Thanks. You showed it better than another video. Can you tell me the following pls:
Which P will do the following:
1) Run the motor slowly every 2 hours, for only 5 seconds and then go on standby again for 2 hours and keep repeating. So 12 times in a day or whatever time I want to change those.
2) Also I would like to use AA rechargeable batteries, but I think you're using something different. Is that going to be a big issue?
3) And lastly, can the above work with the timer display off, as it will be hidden and I want the battery to last as long as possible, as in charge/ change to charged ones once a month?
Many thanks
Q1: P32, Set TA 5sec, TB 120min, Q2, you can use AA battery, but pls make sure output 12V, Q3: Press K1 for the fourth time and display “----” to enter standby mode
and Press K4 in standby mode to turn off / on the display
Its work with milisecond?
Como le coneto a eso mismo que iso en este vídeo un Monedero electrónico??
TY i need P--36
How to put the display off in P31
can i program it to turn the motor on for 10s after 4 hrs.?
P-35: Triggered, delay TA, on, delay TB , off
TA 240min, TB 10s
It cannot be 12 Vdc as it has 12 volt regulator 78L12. Does anyone know what are it's so called signal input level
will the display off if it idles? or how to turn off the display ?
Press K1 for the fourth time and display “----” to enter standby mode
Press K4 in standby mode to turn off / on the display
@@doma9834 hi don thanks that is very informative let me try and see.😃😃
@@doma9834 hi, sorry for the miss info i have only 3 buttons on my timer do you have any idea?
@@IkmalRusli sorry, i don't know how to operate your timer.
@@doma9834 Its ok bro, i got the search online then
How set auto on
Program 35 ?????????????
Pourriez vous la diffuser en français svp merci
Sir I want to buy. Pl give reference
Can it set to milliseconds for spot welding?
可以請問這要怎麼接線嗎 我買了一個都沒辦法動
在产品亚马逊页面的第四张是接线图
Ilang motor po ba na kagaya nyan Ang kaya ng Time delay switch na pa paganahin sir?
I need to Findone timer that
work with time C..
trigger time A activate For 12 Sec , stays OFF For 720 sec. then ON again For 12 sec. then OFF For 420 sec. and
. the loop.
(12 sec.ON-720sec. OFF- 12sec ON 420 Sec OFF) 12sec ON 72O sec OFF 12 Sec ON 420 sec OFF ........
Hi
anyone knows where can I order thermostat and timer please
search delinx timer relay on amazon
Your Mic is not working!
Hindi pwede poro toro nalang walang sounds, hindi po namin maintindihan. Yon lang po...
This is 7 function not 24. P11, P12, P13, P16, P21, P36, P8. Where are the other functions. This is just junk if other functions are empty.
这是7功能而不是24. P11,P12,P13,P16,P21,P36,P8。 其他功能在哪里? 如果其他函数为空,这只是垃圾。
Video time limit, 如果你需要我可以送一个给你,附送说明书。