Home Automation: YYC-2S Multifunctional 4-Digit LED Display 0-999 Minute relay timer for Automation
ฝัง
- เผยแพร่เมื่อ 2 มิ.ย. 2024
- Step by step all functions of this module is explained. This a great home automation project.
**** Free Arduino Course worth $200***
Arduino Step by Step Course (over 150 lectures) Starts here robojax.com/L/?id=338
The best thank you for me is to not to skip ads and Subscribe 🔔 to my channel, like 👍 the video It is greatly appreciated. 🔔 😊.
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe and enable the bell 🔔.😊
*** Purchase this Relay Timerfrom **
Amazon USA: amzn.to/3wSLVrv
Amazon Canada: amzn.to/3kLnsBZ
All other amazon: amzn.to/3iCWFFj
AliExpress: s.click.aliexpress.com/e/_AL7QG0
Jump to different section of this video:
00:00 Start
07:22 P-11
08:03 P-12
08:41 P-13
09:51 P-14
10:41 P-15
11:54 P-16
12:30 P-17
13:08 P-18
13:44 P-21
14:35 P-22
15:35 P-23
16:27 P-24
17:13 P-25
17:54 P-26
18:34 P-27
19:57 P-31
20:43 P-32
21:31 P-33
22:21 P-34
23:02 P-35
24:05 P-36
24:56 P-37
25:29 P-38
26:21 P-41
26:59 P-42
27:34 P-43
28:02 P-44
28:39 P-45
29:14 P-46
29:41 P-47
30:08 P-48
If you found this tutorial helpful, please support me so I can continue creating contents like this. (PayPal): bit.ly/rj-paypal
Tutorial by Ahmad Shamshiri form Canada
****************************
Arduino Step by Step Course (over 150 lectures) Starts here • Lesson 00 What is Ardu...
****************************
If you found this tutorial helpful, please support me so I can continue creating contents like this. Here is PayPal link paypal.me/robojaxTV
Follow me on Facebook robojaxTV
Follow me on Twitter: / robojaxtv
Follow me on Instagram: / robojax
Tutorial by Robojax.com
Get other projects code and learn Arduino
robojax.com/learn/arduino
*** AFFILIATE PROGRAM ***
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
#robojax #robojax_timer #robojaxArduinoCourse - วิทยาศาสตร์และเทคโนโลยี
I am loving how you presented these nice controllers!
I honestly find them VERY VERY useful!
Many thanks! liked and subbed!
finally someone who explains this board CORRECTLY , NEATLY and just perfect,.. been searching for this for the past few hours,... thanks !!
You are welcome. My pleasure.
Pause time ? @@robojax
A very good summary study. It facilitates the recurring use of the timer for many years. In the meantime, the range has been expanded to include a variety of timer types, but this type (e.g. YYC-2S) offers the most timing options. Big thanks to Robojax for this study.
Great video! I got this module two days ago and figured it out myself. Just today I received the link for the video from my seller. Nicely done, and I must say I did have fun figuring it out on my own. 👍🏼👍🏼
Thank you. just search my channel and you will find many videos for different types of timers. Stay safe.
Very informative and easy to fully understand the operation of this module. This is exactly how instructions for devices should be done. Thank you very much!
Perfect Video. Thank you so much (since there is no manual included when you buy it)
No doubt you deserves like + comment + suscribe 😍😍
That is amazing. I never knew that there is such a device. Thanks for such (another) great video.
You are welcome. this video was 2nd or 3rd time consuming video. I had spends full day testing and then creating the images on Photoshop. It is sold heavily on eBay and AliExpress but the problem is in China most people don't put a model number and that makes it very hard to find the same product. So people won't find this video. Hopefully google will make it easy with image.
WAOW, what a presentation of all the P's.
Very useful, clear and complete video. Thanks!
My pleasure. Glad you enjoyed it!
Thanks for sharing. Your show is clear and simple. It let people easy to understand.
you are welcome.
Thanks, very useful video, I used P-31 for my solar system to power up hydroponic water pump.
You are welcome.
Huge help to me with my Halloween front yard.
This is very useful and affordable tool. Thanks for the video.
Glad you like it!
Well done. The best explanation of device ever.
thank you. I am glad you liked it.
Perfect tutorial. Without this lectures the setup of timer relay is very difficult (because the seller ensures insufficient description).
Thank you. I am glad you found it useful.
Thank you very very mutch
I have get one so i intersted from your nice description
Thank You very much for the detailed test of this timer! I am building my own TIG welder and this is a great device to make my welder able to do argon post-flow, pre-flow, T2 and T4 functions and pulsed TIG function (P32 or P33). On another delay timer was the option to solder on a jumper to make the ground permenent for the trigger so i dont need an additional wire for the trigger ground. Can this be done on this timer as well? There is a solder option next to the Voltage regulators and three solder pads on the back side at the IN- and IN+ connectors which are suspicious. Thank you!
Wonderful halpfull video mate well done
P24 and P28 programs are just what I need. Thanks a lot, keep it up ROBOJAX! Chinese Instructions are garbage for this device or should I say for most of their products not just electronics! They could have sold many of this kind of products if their instructional manuals are clear enough with diagrams and photos.
You are welcome. I am glad you found the video useful.
I have a question, when using the P31, infinite loop with time on and time off, is there any posibility to override that, one time off and leave a bit longer on and then continue the normal loop? I saw the different options but I didn't see any that does exactly that. Thanks so much for your help and your great videos!!
شكرا لك استفدت منك الله يوفقك
Veryyy helpppfullll vid for my house ty for this video mabuhay po kayo from 🇵🇭 🙃
I am glad you find it useful. Please don't subscribe. I appreciate it.
Nice Video - I recently purchased a YYC-2S and ran through ALL the tests while watching your video. I believe there are problems with the P24 description which also shows up subtly in your video also . I believe it's due to a hardware bug. The 2nd time delay in P24 which you call AND the DISPLAY also indicates a "A" is incorrect. The second delay is actually counting down the TB time yet the display indicates it is "A". You can easily verify this by running P24 with TA set to 10 sec and TB set to 5 sec and observe what the second delay is shown as "A" but it counts down from 5 sec (the "B" parameter) rather than 10 sec, which is the "A" parameter. I believe that's got to be a hardware issue as YOUR unit is behaving exactly as mine.
I noticed also that my P41 has a total different functionality than what your video indicates. I'll explain that one in another comment. I can't say why they are different but they certainly are. Perhaps a different design revision?
this module is soled by different people and not all of them are the same. Everything I could find about this module, I posted and shared.
Excellent. Thanks for a very informative video
You are welcome. Please subscribe. I appreciate it and helps my channel grow. Thank you
Hi,can i use that in coin slot signal instead of switch?
or programming it in 3 pulse before it will on ?
Great video, thanks. I was wondering if NC is really closed when timer is "Off" cycle. I need to run two motors, alternatively running one during "On" and other during "Off" cycle.
You are welcome. I can assure you that this is the best way to present and demonstrate this module. You must have skipped some portion of the video. Please watch again and I am sure you will get the answer. I have made over 380 videos as of now and don't remember which module does what.
I really love the simple way you teach in all your videos! I bought this module and made sure it had both regulators on board. If it regulates the input why did I have to chose the voltage I was going to use? I chose the 5v and I do see this stated on the relay. But won't it regulate the voltage down if I actually want to use a 12v supply?
You are welcome. I am glad you find them useful. I had to watch the video to answer your question. The input voltage matters because the input voltage must much that of relay. The regular used it for the Microcontroller (MCU)so it will keep it at the MCU level.
Very nice tutorial video👌
🙂
A very good Video, great. Can you tell me, which maximum value can counter c in P44 take?
Great work thanks.
You are welcome.
Great tutorial - Informative at the MAX! Just made me buy one for testing the complexity of the board and implement it in one of our upcoming projects. Keep them coming!! thanks
You are welcome. I am glad you found it useful.
Thank you for this overview.
Would I be able to power both the timer and my motor from the same 24v dc power supply, or do they need to be on separate supplies?
Yes it is possible.
Thanks for your tutorial. very helpful. I also donated to your channel. thanks again.
Is there a PDF version of the manual?
You are welcome and thank you for your donation. There is no manual for this except they have it as text on listed page on eBay where I read it multiple times and experimented to make this video. the text doesn't make sense in most parts as it is translated by computer from chinese. Just scroll down in this page: www.ebay.ca/itm/202513548721
I am trying to run a small 12v dc motor & have connected wiring as per your video at 4:07. Program P14. I don’t have a push button switch so just touch together the two blue wires. Program counts down exactly as it should but I don’t get any voltage from the out terminals.
I have tried two different timers and both will not run motor.
I get 12.12v from dc+ and dc- terminals.
11.39v from dc+ and IN+
terminals
12.12v from dc+ and IN- terminals.
When I measure voltage at the two blue wires I get 11.39v.
What have I done incorrectly???
Is 11.39v just too low to run a motor??
I woke up today & realised my mistake. I had not realised the out terminals were a switch. 😩
Thanks for your video. I obviously need lots of help.
Good movie , thanks .
A really informative video tutorial..EXCELLENT for a non electronic techy like me, so much so I decided to have a go for curiosities sake..would you kindly advise its power consumption.. eg would a 240v/12v dc 1 amp charger I have lying around be ok to power it for my experiment as I couldn't see its rating Many thanks.
I am glad you found it useful. this module need less than 200mA so yes. you've got 1000mA power adapter. it is more than enough. Good luck. Pay attention to the + and - terminals. Please don't forget to subscribe. Thanks.
Nice one sir
Thank you.
Good day sir! am from Philippines and a fan of your blog. I would like to ask if it is safe to use a relay timer module with a 20a 14vdc, 20a 125vca relay on 220v loads. I just bought online this "XY-WJ01 LED Digital Time Delay Relay Switch Module Time" and planning to use this on my 220v UV light water sterilizer but too hesitant upon seeing the spec of the relay that you have on your module which has an 250vac. I have ask already the seller ang he says that its ok to use. And i have been watching reviews on yt with this module using 220v loads. And if it is not ok, can i replace it with a relay the same that you have on your module?
Could you tell me what function I would need for my application, I couldn't figure it out.
I'm not even sure if this function is available.
My trigger signal is always on, short de-power would be my trigger.
If the trigger de-powers for a short amount of time, the output should be on for 15 seconds. (or off, I don't think it matters since I can use NC or NO)
If trigger goes off before end of program it should reset the timer.
I hope this is possible, if there is another device with a smaller display. That would be preferable.
I have so many different modules see them here th-cam.com/users/robojaxTVsearch?query=timer
Hi there, first of all thank you for the amazing explanation., I am just wondering if I can use 2 limit switches instead of the trigger noting that I have the same board but with 2 relays. It has almost the same function. Thank you again.
you are welcome. yes can if you wire it properly.
Can you use this module like : after you trigger then it waits one minute before turn on the load to keep it on until you trigger again to stop it.
Thanks, I learned a lot from your videos. I have one question about this timer module. I would like to trigger the timer with a ldr. I would set the timer for lets say 5 or 6 hours. But after 6 hours it will still be dark and the ldr would trigger the module again. I only want the timer to turn on the light for 5 a 6 hours and then the next day (evening) again. Its for led lights outside (garden) 12 volt. Is this possible with this module
the LDR I believe will should not work as LDR has very low current. I have not tested it but this i just assumption. Also LDR needs controller module like this. th-cam.com/video/iNea_HM967A/w-d-xo.html or learn about LDR here th-cam.com/video/gkyLnEgu7w0/w-d-xo.html
@@robojax Thank you. Yes i would use a LDR module but the problem would be the LDR module triggering the timer again because it's still dark. Then the only option would be just use the timer and change the timing acording to the changing day light / darkness. I really apreciate your answer and your channel it helps me a lot and brings me inspiration for new projects
Nice sir
Thank you.
13:20 P18: i never get voltage on output - although relais klicks after supplying with 12V and timer is showing countdown - what can be the reason?
update: i found the solution
the relais just switches the positive voltage - you have to connect the DC input to the middle screw of the relais (if you want to use the DC input as powersource for your load as me) and the output to the 3rd screw
As a follow up to my previous comment.
FYI - P41 has different funtionality on MY YYC-2s than displayed in your video when re-triggered during the TA coundown.
In the video, the initial trigger turns the light ON and begins the TA countdown. When you re-triggered during TA, your light remains on and the TA countdown is stopped and displayed with it's current count. When the Triggers stop, the countdown resumes from where it was stopped and the light goes OFF when the count gets to A0000.
In my YYC-2s The initial trigger turns the light ON and begins the TA countdown. But when I re-trigger during TA countdown the following happens with each re-trigger.
When trigger button is depresses during TA Countdown
- The light goes OFF and the display shows A0000 for as long as button is depressed
When trigger button is then released
- The light comes ON and the TA countdown restarts from the beginning.
Just as if it were the initial trigger. As expected, the light stays ON until the TA count goes to A0000
I have no idea why our units behave differently.
Either because of a hardware fault or an intentional design change.
I guess my conclusion is that you're video is very helpful in learning the button functionality but it's also possible that there may be multiple versions of the YYC-2s that have slightly different program functions than described in your video. Any Ideas?
Thanks Again
Good Morning!
how do I connect a coin acceptor on these boards in place of the on-off button?
you connect any device that has LOW and HIGH state and it will act like a switch.
It would have been nice if you had included a brief overview of the i.c. responsible for this - like you do in many of your other videos. Interesting nonetheless.
If it was necessary I would have done it. It is a microcontroller which has been programmed and we have not access to the program. It can't be repaired because it is very cheap. For that reason I did not bother looking at the components.
Can I trigger it like DK-C-05 ? So just connect the "+" of another source to the "IN +" pin ? What are the maximum parameters of the triggering event, is it 10A ? Thank you in advance.
10A is the current. Even if ou put car battery with 120A still it is 12V. So voltage is important. I have mentioned what is the maximum voltage.
Robojax, great video. not that I grasp everything yet. Which Program do I use to do the following:
I am using a beam sensor to send trigger signal . When beam is broken it starts a delay timer (about 8 seconds), then sends signal to solenoid. Solenoid activates pnuematic cyclinder 1 time and then relay shuts off or does not reset or reactivate itself while bean is still broken. Thank you for your help.
you are welcome. I don't remember anything about this video. so to answer your questions, I would have to watch it. you better watch it more than once to understand it. I can assure you that I have not left anything out. Good luck.
@@robojax thank you for your reply. I am trying to hook up a 5 wire retro reflective beam sensor with a YYC-2S relay And a solenoid. Any idea on how to wire? I think my solenoid becomes the load. really confused
You are welcome. I have never heard "retro reflective beam sensor" sorry.
PLEASE I need some help. Can I connect a 12v turning signal in the output? if so , how?
Wow Superb Guide and tutorial ... well explained. Thank you for this video ...
One question Mr Robojax...
If i want to change the Led digital to a bigger 7 segment display what transistor or ic or resistor or capcitor or etc to make it work? Id like to use the module but i want to upgrade the led display. Thanks in advance
Yes it will work. You don't need anything extra. You just need to identify the pins. Remove this and solder wires in holes of pins and solder the wires to your larger size display. I assume it would be twice as large. It will be a little dimmer but it will work. But if you want to connect it to very large LED which needs power, then you need transistors to drive it.
@@robojax thanks for the fast reply sir...
I test the output voltage of every pin it range only 2.4 volts. May larger Led display is 7 volts above atleast.
@@robojax last request sir can you make a video tutorial about adruino module how to make impact force with 2 digit led display for displaying score. I would like to build a punch arcade . With 2 led display to display the score by ranging from 0 to 99 ... thanks sir . Theres no clear tutorial for this kind of build hehehe maybe you will be the one who will make a video with superb guide. TIA
@@robojax what transistor do i need ?
Hello! Thanx for the video!
Can I use it for 5 seconds every 8 hours?
I want to control a turning mechanism for incubator purposes..
Thnx!
You are welcome. I believe I have explained everything. To answer you question I would have to watch the video. So you better watch it without skipping and I am sure you will get the answer.
Hi, what I would like to do is the following please tell me if this will do the following:
1) I want to connect a small DC motor to come on say every 1 or 2 hours for about 5 seconds. So basically I want the motor to spin for 5 seconds on whatever speed and then go on standby for whatever time I need.
2) I want this to work from only 2 double AA rechargeable batteries.
Is this possible or do I need mains power supply which I want to avoid. I'm in UK but just want this to work with rechargeable double AA battery and of course only for few seconds with delay and then repeat...
Thank you.
Hi, 1- You can use loop to do something you gotta watch the video to make sure you can see loop or repeat time and set it to infinity
2-it will not work with 2 AA because AA is 1.5Vx2=3V and this needs higher voltage. you can use a module that gets the 3V and converts it to 5V . Watch this video for the module th-cam.com/video/LMKiPE_2Uu4/w-d-xo.html you can get the module form Amazon. Good luck
@@robojax thank you very much for your help.
you are welcome.
I would like to use it in motor turning, which mode is correct one? Is it 33?
this is a SWITCH. Just ON and OFF so watch the video and choose whichever you like to use .
Hello..
Pls is it possible to use program 31 and then be able to pause and play the timer...
Is there a setting which will allow the trigger to be pressed and held, activating the relay, then when the trigger is released the timer starts, counts down, then turns off the relay? Where can I buy this unit?
you made me watch the video to make sure I mentioned where to buy it from. Indeed I have explained and even shown the store website. So please watch the video. I explain everything this module does demonstrate it. Now the scenario for each project might be different but you would have to use it withing the capability of this module. Perhaps watch it more than once to see how it functions.
@@robojax You couldn't just give me the info here? Not everyone has 31 min. to watch a video!
Thank you very much. Does it work in minutes??
You are welcome. Read the title. it says 0 to 999 minutes. So yes.
@@robojax would you please tell me how it can be set to minutes? I did not find it in your video. Thanks.
P-14 and P-17 are very much identical. How can you differentiate between these two programs? Thanks.
Is there a way to add a motion sensor instead of the button trigger?
of course you can. it is a simple voltage. I have videos on motion sensor. watch them and learn from those.
Wonder this can setup when you touch the button will on 3 second then off and turn on again 3 second then off
Perhaps. I have left nothing and if you watch it fully without skipping, you will get the answer.
hi. please i have this device YYC-2C i have tried to set it as a timer for my incubator to turn the motor on for 5 seconds for every 3hours ...but its not working. i have tried p32 i cant comprehend the setting ..kindly help.
Hi, I have left no out and explained everything. If you watch it fully you should get the answer. If you don’t get what you wanted then this module is not made for that purpose. I don’t remember anything about this so you can watch and come to conclusion. Watch it multiple time so know exactly how it works.
Can this be used to trigger the fan on then trigger again to delay the off for 3 mins?
it can be used to control Fan or heater. Yes. I have explained everything this module can do. please watch and do not escape. I have said nothing extra. If you want to learn how to use this, you should watch it fully.
Only problem is the title . It does seem to exclude that it can time for seconds also as well as minutes. I think in fact that it can tome for seconds too; right?
I will reply to all subscriber's 🔔 questions. So make sure to subscribe.😊
I can only use one program, correct? or i can use mutiple programs at a time?
Correct. You can use only one program.
What function to be use to make the motor works? Is it possible?
wrong module. I have another review on a module to control motor. Search #robojax_timer
If morning I want run cycle loop A and night I want to run cycle loop B, is it can be done by 3 of YYC-2S? With one relay control another 2 relay..
it doesn't know day or night. it just knows the minuets you set from now.
@@robojax How about 720 minutes cycle A and 720 minutes cycle B?
I'm looking for this relay myself, it's not on Aliexpress or Amazon. Where can I buy it ...?
Check the link in the description
When i disconnect the power supply and turn it later on does it start with the last "programm" and time set?
Yes
In P24 what if I hold the trigger again after it's been off, will it behave the same way the first time I trigger it?
Yes. it keeps the programming.
@@robojax You are great and very responsive to comments. Thanks for the reply, keep up the good work. :)
You are welcome. Thanks.
What happen if a programme i choose what needs triggering and button keeps pressed?
Hello, not able programs accepts trigger. I've shown which one.
P-33 👍
hey robojax have you make my video yet?
I have been very busy with other stuff sorry. working new Arduino Courses .
@@robojax if you want you can send me email how to control pca9685 with bluetooth no need video k?
I have to work on it. Until then I won't know how.
Rex Guard r
Sir
I can use this timer for egg incubator ?
On time should be ( 5 seconds ) & off time should be ( 2 hours )
That means I need every 12 days times to on & off and also 24x7
Above times setting used for egg turner in incubator
Waiting for your reply
Thank you sir
egg incubator has specific temperature. this is just timer. so if you want to turn ON of OFF it can do it. I don't remember specific number as I have done 100 more videos after this. Watch it and see if it can do it. I never leave anything out. you should get answer from the video.
@@robojax thank you sir for spending your valuable time and replaying to me
is it safe if the module is always on?
the module is made for that purpose. for safety features, please contact the manufacturer or the seller.
@@robojax the mosfet is getting hot if its always on. planning on putting a heatsink there
What is the maximum current
I have mentioned it in the video.
Where can I get a manual in english?
sorry I have not see the manual. I have provided links to eBay and they have the manual as text with the product.
pls 1h to 300h timers
Hello, we can't see your demonstration on the relay, hide everything from you with the text at the bottom of the screen, shame. Thank you
The subtitle is your setting you click on CC or gear and turn it off. It is not in my control . Search TH-cam how to turn off or in subtitles. Now say shame
Alguma versão em português?
Eu gostaria de saber português. Você pode usar este método para traduzi-lo para qualquer idioma: snipboard.io/x80ryg.jpg
How do I reset this board?
Hello,
I don’t remember theta I did in this video but for sure I can tell you if it has reset feature , I should have shown it.
price
If I have not shown the price, then search for the name of it on eBay or aliExpress.
your site is down :(
Sorry. Just fixed it. It is up now.
@@robojax thank you for your great work and as always excellent tutorials
You are welcome. I have learned from others so I will help as well.
Which program without tregar program
Plzzz reply
Please watch the video please. I would have to watch it for you to find out. Do not escape.
@@robojax I am use this device for incubator
I want to delay 1 hour and 5sec ,but this Proses continue without trigar
try it it for 2 minutes and 10 seconds and check it with your watch. If it worked, then try the HOUR. I am sure you will find it that it is working.
Does the unit power off after no activity or once it's programmed cycle is complete?
no it doesn't.
Ff