BOA Handcuff High Security Transport Box Usage Instructions - Pad Lock in Rear Position

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 เม.ย. 2019
  • This video demonstrates the proper method for securing an inmate utilizing our High Security Dead Bolt Handcuffs, Transport Box and Waist Chain with the Pad Lock in the Rear Position on the inmate. While the Over-Under method is not traditional, it is the best method to ensure the inmate's wrist are comfortable.

ความคิดเห็น • 14

  • @zac7013
    @zac7013 5 ปีที่แล้ว +1

    Thanks guys!

  • @MrAvant123
    @MrAvant123 11 หลายเดือนก่อน +1

    I cannot imagine what you;d have to have done to require being locked in this setup !

    • @alanlurie8675
      @alanlurie8675 11 หลายเดือนก่อน

      NYC DOC Standard Operating Procedure. Google the name “Ralph Bucky Phillips”. Sometimes a low level criminal is just on the border of becoming a very dangerous one. Unfortunately, you never know what tips them over the edge.

    • @fm_0523
      @fm_0523 9 หลายเดือนก่อน

      You'd have to commit a crime and then have to be transferred to prison. The black box/orange box is usually applied to inmates during transport trips.

  • @q-tip4723
    @q-tip4723 3 ปีที่แล้ว +1

    Thanks. Do these fit S&W Model 110 HS cuffs? I want to make sure that don't waste any money on getting a cuff set that doesn't even fit into a box.

    • @boasecuritytechnologies2153
      @boasecuritytechnologies2153  3 ปีที่แล้ว +2

      Good morning,
      No, the S&W Model 110 is too large to fit into the Transport Box. However, the Over-sized Peerless 702 will fit.

    • @q-tip4723
      @q-tip4723 3 ปีที่แล้ว +1

      @@boasecuritytechnologies2153 Thank you for the response and answering my question.

  • @rainerzufall977
    @rainerzufall977 3 ปีที่แล้ว

    So you prefer the stacked (over-under) position over the parallel position? To be honest, I did only use "ordinary" black boxes so far and I don't have any experience with your high security orange box. What the black box is concerned, I would neither call the parallel nor the stacked position comfortable. They both have downsides and the inmate will find both of them annoying. The parallel position puts some pressure on the wrists leaving pressure marks after some time, whereas the stacked position keeps the arms in a rather unnatural position which may cause cramps. But anyhow, these are not made for the inmate's comfort but for security. As the orange box looks much bulkier than the ordinary black box, it may be a bit different. When restraining an inmate in the parallel position, the orange box would probably bend the inmate's wrists more than a standard black box would do and therefore cause undue pain?

    • @boasecuritytechnologies2153
      @boasecuritytechnologies2153  3 ปีที่แล้ว

      The NYC DOC has been using this system for all inmate movements since roughly 2004. In all honesty, the issue of side by side versus over/under never came up until last year when we sold the product to the Hudson County New Jersey Sheriff's. At that time, the inmates were saying the side by side was uncomfortable. Hence, we (BOA and Commanding Officers) reviewed the process together. It was decided that the over/under method was much more comfortable and removed all of the strain on the inmates wrist. This said, this became the preferred method. Our goal is to secure the inmate and make transportation safe for everyone involved; including the inmate. Bear in mind, our Orange Transport Box was designed specifically for our High Security Restraints; and at the request of the NYC DOC and at the time, a group of Super-Max facilities in Minnesota. Because our product is larger than standard cuffs, the Standard Black Box would not fit on our product. Hence, we were forced to tool the product in order for these agencies to make the transition to our product.

  • @Anonymous8317
    @Anonymous8317 2 ปีที่แล้ว +1

    “They can’t be shimmed”, then why the box? (Locksmith here)
    That padlock is a bit big don’t you think? Can have just as hard pick resistant ones that aren’t absurd.

    • @boasecuritytechnologies2153
      @boasecuritytechnologies2153  2 ปีที่แล้ว +1

      Dear Anonymous Locksmith,
      Good questions!
      When the product was first introduced we worked very closely with the NYC Dept. of Corrections on Rikers Island. They assisted and insisted upon some changes to ensure our product met their needs. At that time, they had a Standard Operating Procedure that every inmate in their custody that was being moved throughout the city, state or interstate was to be secured with a Martin Chain and the original Black Box used on standard handcuffs. They said that in order for them to roll to our product BOA needed to provide a Transport Box that would fit the High Security Cuffs. Hence, we responded and provided what they requested. Furthermore, although already designed, the original product did not incorporate the Deadbolt / Anti-Shim feature. It only had the Restricted Key System. We still offer this model for those agencies that prefer it. Although, 95% go with the Deadbolt.
      In regards to your question about the massive Padlock, we merely have no choice if we want to match the key system of our restraints. Medeco (ASSA Abloy) manufactures the restraint cores per our specifications as an OEM customer. The Padlock used is merely the smallest they can or will provide that will match our product. Again, the Padlock and Transport Box are both items that are requested by our customers.
      Lastly, keep in mind that the "typical" inmate that is secured and transported in this manner is not someone you would probably have over for dinner. While I have no doubt that there are plenty of nice people that merely got in trouble and have been incarcerated for making a mistake, there are also many others that are not so nice. They are violent and are a serious escape risk. Clearly, if they are facing forever behind bars, they have little to lose by trying to escape during transportation to courts, hospitals or other facilities. In cases like this, the officers that are transporting them as well as the general public are at a greater risk. Again, nothing to lose means it really does not matter what they have to do to escape. Getting more time is no longer an issue.
      All this said, I was raised in the lock business in NYC. Often, I was called to secure a premise after the break-in. In my personal experience, the break-in's were not always a peaceful entry during the day while someone was at work. Many times they occurred through an open window in the middle of the night. In these cases, the person breaking in knew someone would be home and simply did not care. It was never pretty! In these cases, you are dealing with a very different kind of criminal. This said, when they are finally caught, it is even important to ensure they do not escape. They do some pretty nasty things to innocent people that forever change the lives of the victim.
      Respectfully,
      A.E. Lurie

  • @mikeschulte4271
    @mikeschulte4271 2 ปีที่แล้ว +1

    This is the shit I had to do on my way to school every day back in my day. Plus with no shoes on in the snow up hill both ways and handcuffed then only when I got to school after 5 miles this shit was taken off,

  • @bruceleethewarriorswordsma5038
    @bruceleethewarriorswordsma5038 4 ปีที่แล้ว +1

    Bit to heavy and that's to much time and messing around to lock prison up Example