I don’t lie the steps also i will weld up some extensions onto the steps like i did to my other newholland and make a mud brush built into the steps to clean off the mud /crud before you get in . Thanks for responding back . Great video enjoy your tractor , tom
I just got my 75 Powerstar and the Doors are so hard to close and latch without slamming them very hard . The dealer said that is normal . I said your full of it so i went back to dealer and tried all 3 of the same model and they too have to be slammed hard to get them to seal and latch tight . Called new holland about this with no help from them but to take it back to dealer . I can’t believe new holland would let these tractor go out like this . Have you had the same issue with your doors ? they are the same as on mine .
Yeah, sure have if you crack one of those side windows open it’ll shut fairly easy from the inside, but obviously you don’t wanna leave it open when you’re getting out of it cause then you got an open window
@@4MRanch thanks for responding i am disappointed with the newholland reps answer but it is what it is. A pain . I just thought of this also ….on your joystick it has 2 orange buttons to operate off of the auxiliary controller valve for the front auxiliary hydraulic if you use A BAIL ,OR GRAPPLE when i tried both switches to work my grapple only one works and has 12 volts power to it, the other is not functional according to the dealer service person . I thought the switches would work the grapple. One switch in and the other one for out or open close in my case. How is your control working if you are using it?
@tom73055 man it’s been a while since I’ve used the grapple on there. I don’t use it on there a whole lot cause I got the Bobcat, but I’m pretty sure both buttons ones for close and the other ones for open.
Sorry, I have no idea all the 100s we looked at had it so it came from the factory like that. I bet it could be added on. I’d Call a new Holland dealer an ask.
Nice looking tractor. I have a New Holland T5060 which is very similar. Mine is 100hp as well. I like the swing out condenser, major improvement. I like that they have a buddy seat as well. You’ll enjoy it.
Just bought one. Having a 3rd rear valve (bat-wing controls) and a front independent line for a grapple installed by the dealer. Traded a Kubota 9540 open ROPS that was bullet-proof for the last 8 years. Looking forward to A/C & Heat and fewer chiggers (LOL)
I don’t lie the steps also i will weld up some extensions onto the steps like i did to my other newholland and make a mud brush built into the steps to clean off the mud /crud before you get in . Thanks for responding back . Great video enjoy your tractor , tom
Yeah it needs it I’ve slipped off several time. Thanks for watching please subscribe. You as well
I just got my 75 Powerstar and the Doors are so hard to close and latch without slamming them very hard . The dealer said that is normal . I said your full of it so i went back to dealer and tried all 3 of the same model and they too have to be slammed hard to get them to seal and latch tight . Called new holland about this with no help from them but to take it back to dealer . I can’t believe new holland would let these tractor go out like this . Have you had the same issue with your doors ? they are the same as on mine .
Yeah, sure have if you crack one of those side windows open it’ll shut fairly easy from the inside, but obviously you don’t wanna leave it open when you’re getting out of it cause then you got an open window
@@4MRanch thanks for responding i am disappointed with the newholland reps answer but it is what it is. A pain . I just thought of this also ….on your joystick it has 2 orange buttons to operate off of the auxiliary controller valve for the front auxiliary hydraulic if you use A BAIL ,OR GRAPPLE when i tried both switches to work my grapple only one works and has 12 volts power to it, the other is not functional according to the dealer service person . I thought the switches would work the grapple. One switch in and the other one for out or open close in my case. How is your control working if you are using it?
@tom73055 man it’s been a while since I’ve used the grapple on there. I don’t use it on there a whole lot cause I got the Bobcat, but I’m pretty sure both buttons ones for close and the other ones for open.
How is the air conditioning? I am in South Texas so it gets hot and coming from a Workmaster where the vents are overhead. Thanks
It’s not bad but I don’t like how the vents are all the console on the steering wheel. I wish it had roof air vents also
Same tractor as my 2017 farmall 100c. So far, I’ve had good luck with it. I like it. Hope you have good luck with it.
Yeah, I’ve heard that when they’re going down the assembly line they don’t know what they’re going to be until the paint goes on
I have a Powerstar 75... happen to know if the auto throttle is an add on or called something else? I can’t seem to find any info about it.
Sorry, I have no idea all the 100s we looked at had it so it came from the factory like that. I bet it could be added on. I’d Call a new Holland dealer an ask.
Does the ac freeze up a lot? I have a Case 100 horse and it’s always freezing up
No it hasn’t. It works good
Nice looking tractor. I have a New Holland T5060 which is very similar. Mine is 100hp as well. I like the swing out condenser, major improvement. I like that they have a buddy seat as well. You’ll enjoy it.
Yes the swing out condenser is nice specially for hay season.
Just bought one. Having a 3rd rear valve (bat-wing controls) and a front independent line for a grapple installed by the dealer. Traded a Kubota 9540 open ROPS that was bullet-proof for the last 8 years. Looking forward to A/C & Heat and fewer chiggers (LOL)
What did they charge to have that put in
@@4MRanch 1250 on the front 3rd function that works off the joystick buttons, 750 for a CNH 3rd rear valve
That’s not bad I may look into getting that done it would be nice to get a grapple
Very impressive Machine must be expensive 👍
Yes it was!
Anyone else have problems with them not running