How to Remove the AirTag Speaker

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ม.ค. 2025

ความคิดเห็น •

  • @zacks240sx
    @zacks240sx 6 หลายเดือนก่อน +26

    Many people don’t see the point of doing this. I’m personally pulling the speakers out of my airtags to hide them in my car incase any of the cars get stolen. It’s a very reliable and cheap tracking device.

    • @clean8-bit
      @clean8-bit  6 หลายเดือนก่อน +8

      Same! I even named the tags "Police Prius" and "Police Jeep" just in case the thieves see the AirTag name lol

    • @DampedCoast
      @DampedCoast 4 วันที่ผ่านมา

      Also just a way for a random person to do this and plant it on your car which is sketchy

  • @gon.zo117
    @gon.zo117 10 หลายเดือนก่อน +2

    Very helpful! Thank you.

    • @clean8-bit
      @clean8-bit  10 หลายเดือนก่อน

      Nice

  • @noname-tj3rp
    @noname-tj3rp 9 หลายเดือนก่อน +3

    Is the is the new AirTag model?

    • @clean8-bit
      @clean8-bit  9 หลายเดือนก่อน

      There is only one model of AirTags. However, before people who found them couldn't make them go off with sound.

    • @ABP760
      @ABP760 9 หลายเดือนก่อน +7

      This is not the new AirTag
      2024 model now has battery glued to 2 tiny bronze wires. Currently doing this now, removes the battery and realized it was glued to the wires. I removed the battery and it failed to connect. Apple might have caught on to this via complaints. You can get underneath the wire with a small thin blade and slice it. Found this out via Reddit. And yes, another AirTag had to be sacrificed 😢

    • @voidenterthehighlights
      @voidenterthehighlights 9 หลายเดือนก่อน +1

      @@ABP760 shit I just opened mine and was very confused that the speaker is not there. Mine were bought in 2023 tho

    • @DORAGONROUDO
      @DORAGONROUDO 8 หลายเดือนก่อน +1

      @@ABP760Hi, I just bought mine today and trying to do a research before popping it open. Do you have instruction video or pictures for the new model? FYI mine said it’s model A2187 in the box. Thanks in advance!

    • @itsjayyy8910
      @itsjayyy8910 3 หลายเดือนก่อน

      I’ve just bought one and removed the speaker but there is still a very quiet sound still

  • @GSBW_
    @GSBW_ หลายเดือนก่อน +4

    I just did this with the current version of the AirTag. Although the speakers are in a different location, the process is the same and it still works.
    If you are doing this now (XXNOV2024, be careful when removing the speaker as there are copper connections below it.
    Be sure to break the seal of the glue surrounding the speaker before removal.
    Good luck and don't do illegal shit PLEASE!

    • @clean8-bit
      @clean8-bit  หลายเดือนก่อน

      Thank you for sharing this!

  • @alexhoyt4118
    @alexhoyt4118 10 หลายเดือนก่อน +1

    Great video! Exactly what I needed. Looking for a way to hide an AirTag in my jet ski without it being able to be detected. You just need to remove the inner ring. The pen markings he shows is where you want to pry with a razor or small flat head screwdriver

    • @clean8-bit
      @clean8-bit  10 หลายเดือนก่อน

      Have fun this summer on your jet ski bro!

  • @MCR831
    @MCR831 9 หลายเดือนก่อน +4

    How did you get tothe 3 tabs .. you just snapped your fingers?

    • @clean8-bit
      @clean8-bit  9 หลายเดือนก่อน

      I only marked them when I snapped my fingers to show you the location.

  • @intensifiedhipster
    @intensifiedhipster 9 หลายเดือนก่อน +8

    Thanks, useful guide. I'll put in on my bike now to track it if it's stolen.

    • @clean8-bit
      @clean8-bit  9 หลายเดือนก่อน

      I hadn't thought of putting one on my bike... I'll do it too.

    • @n3tfury
      @n3tfury 4 หลายเดือนก่อน

      hope that the thief doesn't have an iphone.

  • @richardoceannet
    @richardoceannet 7 หลายเดือนก่อน +2

    Thx! The video was a bit fuzzy but I figured it out. Used a screwdriver from an eyeglasses repair kit.
    One airtag done - 6 more to do!

    • @clean8-bit
      @clean8-bit  7 หลายเดือนก่อน +1

      Where are you putting so many aritags? lol

  • @yop1950
    @yop1950 10 หลายเดือนก่อน +2

    Lo hice y funciona bien.
    Gracias

    • @clean8-bit
      @clean8-bit  10 หลายเดือนก่อน +1

      Que nunca nos roben los carros!! lol

  • @filippofarina4960
    @filippofarina4960 13 วันที่ผ่านมา +1

    Mine still plays a sound after removing the speaker!

    • @clean8-bit
      @clean8-bit  13 วันที่ผ่านมา

      Dark magic!

  • @clade3_91
    @clade3_91 7 หลายเดือนก่อน +2

    Nice video, thanks for the help!

    • @clean8-bit
      @clean8-bit  7 หลายเดือนก่อน

      You bet!

  • @menalicruz343
    @menalicruz343 9 หลายเดือนก่อน +1

    Thanks! The Air Tag I bought was this same "model", so it was easy to remove the speaker. The problem was to put it back together. The first time I put it back together it wasn't working, I had to try to remove again some times, but eventually it came back to work, but I had to configure like a new one again.

    • @clean8-bit
      @clean8-bit  9 หลายเดือนก่อน +3

      Well I'm glad we didn't fuck it up lol

  • @NancyNorstrem
    @NancyNorstrem 7 หลายเดือนก่อน +1

    Should I remove the speaker before pairing it with my iphone?

    • @clean8-bit
      @clean8-bit  7 หลายเดือนก่อน

      I would remove it after, that way you can hear the sounds the AirTag makes when you pair it.

  • @TheDdsdad
    @TheDdsdad 5 หลายเดือนก่อน +1

    I don’t understand why would the speaker go off ? If the AirTag is connected to my iPhone, will another foreign iPhone be able to trigger the AirTag speaker ?

    • @clean8-bit
      @clean8-bit  5 หลายเดือนก่อน +3

      Yes, because people were using the AirTags to stalk other people and to track them. So now anybody with an iPhone can make them ring if they are nearby.

  • @jess_santillan
    @jess_santillan หลายเดือนก่อน +1

    Wait so how did you get to the plastic tabs? The snap doesn’t tell me 😅

    • @clean8-bit
      @clean8-bit  หลายเดือนก่อน

      At minute 1:50 I show how to remove the tabs. The snap was only to show the location of said tabs.

  • @vincentv1432
    @vincentv1432 5 หลายเดือนก่อน +1

    Won't precise location just point to where the air tag is?

    • @clean8-bit
      @clean8-bit  5 หลายเดือนก่อน +2

      You can only use precise location if you are the owner of the tag.

  • @OlsenAaron
    @OlsenAaron 6 หลายเดือนก่อน +2

    Enjoyed the comedy and the very detailed info Thank You, one chattie little fella disabled on my end.

    • @clean8-bit
      @clean8-bit  6 หลายเดือนก่อน

      Nice!

  • @CarcPazu
    @CarcPazu 6 หลายเดือนก่อน +1

    Works perfectly, thank you.

    • @clean8-bit
      @clean8-bit  6 หลายเดือนก่อน

      Glad it helped

  • @raymuniz113
    @raymuniz113 4 หลายเดือนก่อน +1

    I don’t know what happened, but I removed the speaker, fallowing this procedure, of a perfectly working AirTag and now I can’t pair the AirTag with my IPhone. It just doesn’t sync, and I didn’t touch any of the circuitry and handled it very carefully. I’m screwed.

    • @clean8-bit
      @clean8-bit  4 หลายเดือนก่อน

      Oh shit! Could be that the AirTag was already defective?

    • @raymuniz113
      @raymuniz113 4 หลายเดือนก่อน +1

      No, it wasn’t. I had it hidden in my car and it was working perfectly. It was practically new. I wanted to remove the alert sound, so if for some reason my vehicle got stolen, they wouldn’t know where the AirTag was hidden.

  • @mattyjames81
    @mattyjames81 หลายเดือนก่อน +1

    Good video, but why would you be silly and snap your fingers to have all the tabs come out, we have no idea how you released the tabs! Had to go to a different video

    • @clean8-bit
      @clean8-bit  หลายเดือนก่อน

      Great point! I honestly don't remember why I did that lol

  • @alexhoyt4118
    @alexhoyt4118 10 หลายเดือนก่อน +4

    Ahhh, I see now. In the video it looks like you’re inserting the screwdriver into an incision you created in those 3 places. Not behind the ring. I’d been sawing away at the back of my AirTag haha😂

    • @clean8-bit
      @clean8-bit  10 หลายเดือนก่อน

      LOL

  • @alexhoyt4118
    @alexhoyt4118 10 หลายเดือนก่อน

    You skipped over the most important part. How do you make those cuts?!?

    • @clean8-bit
      @clean8-bit  10 หลายเดือนก่อน

      What cuts? the black lines are marking I made to show the location of the tabs below.

  • @KaylaC-s5n
    @KaylaC-s5n 3 หลายเดือนก่อน +1

    Airtag took one for the team.

    • @clean8-bit
      @clean8-bit  3 หลายเดือนก่อน

      Superficial damage lol. Still works as intended inside my Jeep.

  • @SvevPopkin-pm5bs
    @SvevPopkin-pm5bs 8 หลายเดือนก่อน

    Did this today and now its not working

    • @clean8-bit
      @clean8-bit  8 หลายเดือนก่อน

      Was it working before doing this? If so, I'm sorry to hear that. I've done it to 4 airtags so far and all of them are working fine.

    • @RockyRepairs
      @RockyRepairs 8 หลายเดือนก่อน

      mine did the same thing, i just kept messing wit the metal twist backplate until it worked again

    • @stilostan-the1st
      @stilostan-the1st 6 หลายเดือนก่อน

      I've done this to a lot of air tags, never had a problem with any

  • @JaydeQ
    @JaydeQ 8 หลายเดือนก่อน +3

    Thanks for skipping how you removed the plastic insert

    • @clean8-bit
      @clean8-bit  8 หลายเดือนก่อน

      Sorry! lol

  • @Salimreza597
    @Salimreza597 8 หลายเดือนก่อน +1

    Use super glue for the sacrificed one

    • @clean8-bit
      @clean8-bit  8 หลายเดือนก่อน +2

      I left it with the tape and ugly looking to remind me of my mistake lol

  • @CaspersSVT
    @CaspersSVT 9 หลายเดือนก่อน +2

    Kidnappers thank you for your video.

  • @marylim2011
    @marylim2011 5 หลายเดือนก่อน

    your video is damn blur.

    • @clean8-bit
      @clean8-bit  4 หลายเดือนก่อน

      Sorry :P