The GOAT givn great information on Cicada I have all cicada speakers an I’m thinkn abt 8’s in the lids wit a tweeter a putting 8’s in my lowers to replace my CH’s 6.5 cicadas nice Carlos
Killing me smalls. You’re going to make me ride all the way to New Jersey to get a proper cicada install. I just don’t trust anyone locally in nc to do a good job. 😅
Merry Christmas, Carlos, to you and yours. Keep up the great work, brother. (1) Are these a drop-in fit on a 2023 road glide upper fairing, and (2) how long is the wait-list to have NVS Audio install them?
I just ordered 2 pairs of the chx65.2 to run in my upper and lower fairings. I already have a Fosgate 400.4 but was thinking of adding a Sound Digital 1200.4 to run the mids and use the Fosgate to run the tweeters. Would this work or should I just use a single Sound Digital 2400.4?
Quick question? Need more power current setup 4 ch6.5 .4s 2 cm84s 2 .75 tweets dsp 150.4 front cx250.2 rear. Want the new 10" cutting so bad but have no place for the 1400.4 for cm10???? Please help Wyoming audio scene is dead!!@!@ You rock Carlos🤘🤘
I got them. Thanks so much. Would they work good on 4ohm horns as well or just on 8 ohm horns like the cicadas are? I'm looking at possibly using Galeforce f3s and they have 4 ohm horn tweeter.
Quick question, I have a 2017 limited. It has a power Acoustik deck and had the 6 speaker gos gate set up with the 400 watt amp . I changed out 4 of the six speakers to the Cicada CH’s the 6.5 in the fairing and the 6x9’s in the lids . And it does sound a lot cleaner! But it seems like it needs more power . Do you think they need a bigger amp ? And if so what would you recommend? Thanks in advance.
I can check for you in the morning I’m pretty sure they are a drop in fit . Call the shop in the morning and I will confirm while you are on the phone . 908-527-6772
i have the 6.5 cicada in my lowers, love them
The GOAT givn great information on Cicada I have all cicada speakers an I’m thinkn abt 8’s in the lids wit a tweeter a putting 8’s in my lowers to replace my CH’s 6.5 cicadas nice Carlos
Those chx have tweeters though!
Thinking about running them in lids and was waiting on your review to help me make a decision.
Merry Christmas Los to you your NVS circle and family
You can tell these sound way better than the CH line. Good job cicada
Thanks this video has made my mind up wanted to replace my ch8 with these👍
Killing me smalls. You’re going to make me ride all the way to New Jersey to get a proper cicada install. I just don’t trust anyone locally in nc to do a good job. 😅
I’m in Charlotte. Lol. Let me know when you ride up. I’ll ride with ya!
Merry Christmas, Carlos, to you and yours. Keep up the great work, brother. (1) Are these a drop-in fit on a 2023 road glide upper fairing, and (2) how long is the wait-list to have NVS Audio install them?
We have a full staff
We can take you in whenever you are ready
Wish they would make some sealed back.
@nvsaudio they also require almost not trimming to get them in the lids!!
When are you going to a do a review for the new Diamond Audio Head Unit?
Yes
I’m waiting for the new sound steam to come out so I can test them both at the same time
@@NVSAUDIO cannot wait. Thinking of making a trip next year to visit your shop and ask questions.
My question is If I run the 6.5 chx in the fairing and 6x9 in lids what amp or amps would power that set up
I would do a
cicada 2000.4
2 sound digital evox 2 800.4 bridged ( one for the faring one for the lids )
1 sound digital 2400.4
I just ordered 2 pairs of the chx65.2 to run in my upper and lower fairings. I already have a Fosgate 400.4 but was thinking of adding a Sound Digital 1200.4 to run the mids and use the Fosgate to run the tweeters. Would this work or should I just use a single Sound Digital 2400.4?
I have the 1400.4 with the CHX 6.5 2ohm, I don’t think there getting enough power. Thought about getting the 4 ohm version to bridge my amp?
Quick question? Need more power current setup 4 ch6.5 .4s 2 cm84s 2 .75 tweets dsp 150.4 front cx250.2 rear. Want the new 10" cutting so bad but have no place for the 1400.4 for cm10???? Please help
Wyoming audio scene is dead!!@!@
You rock Carlos🤘🤘
Look at sound digital amps
1200.4 on the mids 1600.1 on the bass
Since you don't use those crossovers and Resistors could I buy a set? Cicada does not have them listed on there site. I could realy use them.
ill ship them to you for free
email me
nvsaudio@gmail.com
@@NVSAUDIOI emailed you. Thanks
I got them. Thanks so much. Would they work good on 4ohm horns as well or just on 8 ohm horns like the cicadas are? I'm looking at possibly using Galeforce f3s and they have 4 ohm
horn tweeter.
Are you running the horn parallel or bi-amp in each video clip
For the test
I used the horns in parallel
Quick question, I have a 2017 limited. It has a power Acoustik deck and had the 6 speaker gos gate set up with the 400 watt amp . I changed out 4 of the six speakers to the Cicada CH’s the 6.5 in the fairing and the 6x9’s in the lids . And it does sound a lot cleaner! But it seems like it needs more power . Do you think they need a bigger amp ? And if so what would you recommend? Thanks in advance.
Yes
Sound digital evox 2 800.4 or 1200.4
Or Cicadia bda 1400.4
@@NVSAUDIO and what speakers would you put in the tour pack ? The cicada’s wouldn’t fit ?
I have a 2018 tri glide would these be a drop in fit for the tour pack if not can you point me in the right direction
I can check for you in the morning
I’m pretty sure they are a drop in fit .
Call the shop in the morning and I will confirm while you are on the phone .
908-527-6772
@NVSAUDIO will do thanks for your time
What power do you recommend for the tweeter alone?? 100w?
50 - 125 watts
Can u run them in lowers with the coolers in it ?
Yes, but you will need a spacer
How would you say these fit in the pods of a rg compared to the ch?
These fit better
These fit better
These fit better
How does the 6x9’s compare to the sx690’s?
These rewire more power the hertz requires less power
On 400 watts each I would pick the cicada
Been back n forth trying to decide on hertz or cicada. Losing my dang mind lol 😂
Would the diamond 4v2 be enough for the tweeters being they are 8ohm?
@@camrobinson1466 yes
@@camrobinson1466 yes
Is that the Carol of the bells remix I hear you play
Yes
That is a lot of crossover and wiring lol.
Or you could just put a second amp on the tweeter
@@NVSAUDIO I think the second amp is the best way to go!!