Very impressive way to frame them. Thank you for sharing. I can use this in my shop. Everyone stay safe, happy and healthy. From Henrico County Virginia
Great cabinets/shelves....i was looking for something simple,functional and great looking, you hit all these ideas out of the ball park. Thanks for the video!!
Why are garage cabinets made so complicated/tedious? This video is exactly what I was looking for! They look great and thank you for not making this a 10min video. Subscribed!
THE BEST SIMPLE CABINET BUILD ON TH-cam,,,i was thinking exact same,,why not just 2x4 & plywood!!! ,,why all videos make it complicated,,thanks BRAH!!!
Awesome video. It looks so easy because well you are good at what you do. I have storage in my garage for when I bought the house but with no doors. This video definitely showed me how to go about doing that.
It appears from the video that the two "upper" shelves in the cabinet are supported by 2x4's on 3 sides. But it appears you only supported the bottom "shelf" of the cabinet by screwing up into the 2x4's across the back and on the left side, and only into the end of the plywood on the right side? Being that the bottom shelf would presumably hold the heaviest items, I would think it might need more support than just the screws? They look good though. Thanks for the video!
Es mas facil de lo que lo es en madera, puedes usar cualquier parte de la pared para los tornillos y el anclaje, es mucho mas solido que en paredes de madera. Lo importante el usar un roto martillo.
@@jesmasco obvio, tenemos roto martillo y puntas ideales para ello, pero montar y ser creativo al vuelo te kaga el hecho de lidiar con huecos en ladrillo o cemento, los tarugos y tornillos... Obvio, se que queda mas firme, pero en madera se avanza como en mantequilla
Nicely done! What kind of board stretcher did you use? I noticed between 1:29 and 1:32 the bottom panel grew by 3.5 inches or so ;). I've had to use various board stretchers myself over the years.
I think I might do the same with base cabinets but I will add some totes made of plywood that will lay on the shelves so I can pull them out and set them on my work bench. I like what was done here. Symple build and still looks nice using the kreg jig and building a facial
I loved this video! I'm sure it's probably not going to be nearly as simple as you made it look because I am a complete rookie, but I'm going to attempt!
Nice work, but I laughed when I saw that you'd cut the bottom shelf too short and then magically fixed it without showing us, as a comparison of 1:10 and 1:15 shows!
Quick question. Were you not worried about screwing into studs? The portions that screw to the wall that equate for the depth of the cabinet as well as the vertical runners is it OK if they’re just screwed into the sheet rock?
I believe he locates the stud on one side and then marked the wall for all the other studs based on the stud center-to-center distance. The screws must go into the studs, the sheetrock will not support any significant weight.
I make the spaces first, then make the doors based off of the opening measurements. Most times, I make my doors 1 inch bigger than the opening, so it will be 1/2 inch bigger on each side. Does that make sense?
I love this! Thanks for sharing. I’m about to build the same thing in my garage, except they will be placed in the middle of the wall, not in a corner, so the bottom left brace you have will not be there. Will that be ok? @hesswoodworks
@@grmarshall Сделаю обзор после нового года. Шкафы для хранения это легкий уровень.Только закончил варить металлический стеллаж в стиле лофт в кофейню.Рабочее место баристы.Обзор будет на канале- тоже после нового года. П.С.- про медведей я пошутил- они не нападают.Просто заходят в гости попить водки...
@@garagedayschannel Knowing how many Russian people love vodka, I can see why you would be concerned about bears! I'll look for you metal cabinets after the New Year.
By far the simplest garage cabinets. Love it.
Thank you!
the efficiency of motion here is pretty impressive
I work fast!
Thank you for patiently waiting three years for this response:
That's what she said.
Great Work! 6 Minutes WOW Imagine Him Spending the weekend At your house.
Thanks! I work fast!
Very impressive way to frame them. Thank you for sharing. I can use this in my shop. Everyone stay safe, happy and healthy. From Henrico County Virginia
Thank you! You're welcome!
Efficiency in both material and labor. I loved watching you build this
Thank you!
Great cabinets/shelves....i was looking for something simple,functional and great looking, you hit all these ideas out of the ball park. Thanks for the video!!
Thank you!
I like it! And with the cost of plywood, using 2x4s and pine shelves is much more cost effective.
Thank you!
Why are garage cabinets made so complicated/tedious? This video is exactly what I was looking for! They look great and thank you for not making this a 10min video. Subscribed!
Glad it was helpful!
I love the door as a work bench that folds down. I have something similar, but not a fancy door ha ha. Nice job, looks great.
Thanks!
THE BEST SIMPLE CABINET BUILD ON TH-cam,,,i was thinking exact same,,why not just 2x4 & plywood!!! ,,why all videos make it complicated,,thanks BRAH!!!
Your welcome! Keep it simple!
Awesome video. It looks so easy because well you are good at what you do. I have storage in my garage for when I bought the house but with no doors. This video definitely showed me how to go about doing that.
Thank you! I am glad to help you!
Love the build idea. Good design, and easy setup. And I am guessing solid as a rock as well, from the way you built that. Nice work! :)
Thank you!
Good Job Dude. Simple but Works
Thank you!
Nice cabinets, exactly what I want. Simple and quick.
Thank you!
Loved that you made glue-up panels for the shelves in place. Awesome.
I used left over wood!
@@hesswoodwork oooohh....thats why you ripped the 2x10s.....wasnt sure why,,,,,,,im gona buy some studs.....thanks
i cant believe this guy just pulled this off out of absolutely no-where.
It was simple cabinets!
Hi there. The best thing about your porject is that you use simple materials and affordable tools that we can all use! Ofc i subs:)
👍🏻
I like this ! Great work
Thanks a lot!
Outstanding
Thank you!
It appears from the video that the two "upper" shelves in the cabinet are supported by 2x4's on 3 sides. But it appears you only supported the bottom "shelf" of the cabinet by screwing up into the 2x4's across the back and on the left side, and only into the end of the plywood on the right side? Being that the bottom shelf would presumably hold the heaviest items, I would think it might need more support than just the screws? They look good though. Thanks for the video!
Thank you! I wasn't planning to put anything heavy in this cabinet.
Excellent Job!
Thank you!
Love mine!!!
Awesome!
Outstanding Performance. Are those 2x4's attached to the wall and ceiling?
Thanks! Yes they are 2x4's
Well done
Thanks!
if only installing cabinets in a cement-house here in Peru would be that easy. lol, nice video bytheway!
Thanks!
Es mas facil de lo que lo es en madera, puedes usar cualquier parte de la pared para los tornillos y el anclaje, es mucho mas solido que en paredes de madera. Lo importante el usar un roto martillo.
@@jesmasco obvio, tenemos roto martillo y puntas ideales para ello, pero montar y ser creativo al vuelo te kaga el hecho de lidiar con huecos en ladrillo o cemento, los tarugos y tornillos... Obvio, se que queda mas firme, pero en madera se avanza como en mantequilla
Looks great 👍 Do you have shopping list, measurements and plan for this please?
Thanks! I used extra lumber for these cabinets. 3/4 plywood and I cut up some 2x10s. The overall size is 4’ high 7’ long and 16” deep.
That's a pretty awesome video. Thanks!
Thank you!
Skills!
Thanks!
Awesome job, thanks for sharing.
Thank you!
Nicely done! What kind of board stretcher did you use? I noticed between 1:29 and 1:32 the bottom panel grew by 3.5 inches or so ;). I've had to use various board stretchers myself over the years.
Haha, How did you notice that?
What a friggen snipe!
👍👍👍👍nice work
Simply well done
Thank you!
nice and simple! Love it
Thank you!
I think I might do the same with base cabinets but I will add some totes made of plywood that will lay on the shelves so I can pull them out and set them on my work bench. I like what was done here. Symple build and still looks nice using the kreg jig and building a facial
That's a great idea!
Excellent work 👌👍👍
Thanks!
Love it! great simple build!
Thanks!
Awesome job . Thank you
Thanks!
does it get the strength by upper screw with roof
On the right hand side of the cabinets did you just attach the shelf supports to the outer panel of the cabinet or did you attach it to the wall also?
I attached it to the wall, I think.
I loved this video! I'm sure it's probably not going to be nearly as simple as you made it look because I am a complete rookie, but I'm going to attempt!
Awesome!
Great idea, good work
Thank you!
Fantastic
Thanks!
very impressive what kind of wood you used at the begining , look like 1 in x 6 in?
Thank you! That was a 2x10
Nice work, but I laughed when I saw that you'd cut the bottom shelf too short and then magically fixed it without showing us, as a comparison of 1:10 and 1:15 shows!
Magic! Haha
Nice video but, would be nice to have a narrative with it.
Thanks! Yes
Quick question. Were you not worried about screwing into studs? The portions that screw to the wall that equate for the depth of the cabinet as well as the vertical runners is it OK if they’re just screwed into the sheet rock?
I believe he locates the stud on one side and then marked the wall for all the other studs based on the stud center-to-center distance. The screws must go into the studs, the sheetrock will not support any significant weight.
I did screw into the studs.
Fantastic
Amazing video…What kind of screws did you you at the very beginning? Also…..did you only screw into the drywall and not into any studs?
Thank you! I used 3 inch wood screws into the studs.
can u tell evrything step by step im going to try to do this please
Nice!
Thanks!
Thank u for sharing
Thanks for watching!
WOW!
Thanks!
What is the overall sizes of the cabinet please?
84"x48"x16"
@@hesswoodwork Thank you
Can you tell me the names of the 2 (blue) tools that you used for the angled screw holes and the door bracket holes? Thanks 👍
Kreg Jig!
@@hesswoodwork Thanks!
How did you measure the space between each door at the 3:48 minute mark. I always struggle with this part.
I make the spaces first, then make the doors based off of the opening measurements. Most times, I make my doors 1 inch bigger than the opening, so it will be 1/2 inch bigger on each side. Does that make sense?
Did you ever end up painting the cabinet or put handles on the doors?
I didn’t. I should!
@@hesswoodwork still looks great.
The old school way. Just about every set of uppers used to be built in this fashion.
Yes, this was just storage in my garage.
I really like it. From what I have seen, it seems like not many people know much about it anymore.
What type of wood did you use for the doors?
I just used plywood
Did you drill with nailes it,in the beginning??
I connected the wood with screws, using an impact driver.
@@hesswoodwork ok👍
@@hesswoodwork your wall is plywood?
Nice
Thanks!
Did you use dry wall screw?
I used wood screws
is he just drilling into drywall? with the screws?
Into the studs behind the drywall
this is pro
Yes!
Dump the music and you have a great video. Thanks.
Should I add music? Thanks!
i cannot for the life of my find my studs in my garage im about to tear my drywall down
Then you will find the studs
Is your wall full of studs?
16” on center
What is the size?
84"x48"x16"
I watched with headphones and the sound at the end scared the $h!T out of me...But fantastic video. Just what I was looking for.
Sorry! I since learned to adjust the sound!
Donde quedó el amor? Es broma, eficiencia y calidad ante todo.
I don’t know much Spanish
There's no love. Only hard work
Even FLASH can't !
Haha
💯
Thanks!
Wow, why do my doors always need adjusting?
the frame/cabinet/hinges aren't square.
Cabinets that are installed correctly, shouldn't always need adjusting. Are your walls moving?
That dudes fast!!! Dont do drugs
I am fast!
2nd door from left is too low
Sorry
Good jop
Thanks!
I love this! Thanks for sharing. I’m about to build the same thing in my garage, except they will be placed in the middle of the wall, not in a corner, so the bottom left brace you have will not be there. Will that be ok? @hesswoodworks
Thank you! It will be good, just make sure to screw into the studs.
@@hesswoodwork Awesome thanks. And 3/4-inch plywood all around? Even on the doors? Would 1/2-inch not be thick enough?
Hii
Heyy
Неплохо.Но я такие вещи для своего сурового российского гаража из металла делаю.На тот случай если медведь внутрь попадет то сломать не сможет.
@Garage Days Channel Where's your video of your metal garage cabinets?
@@grmarshall Сделаю обзор после нового года. Шкафы для хранения это легкий уровень.Только закончил варить металлический стеллаж в стиле лофт в кофейню.Рабочее место баристы.Обзор будет на канале- тоже после нового года.
П.С.- про медведей я пошутил- они не нападают.Просто заходят в гости попить водки...
@@garagedayschannel Knowing how many Russian people love vodka, I can see why you would be concerned about bears! I'll look for you metal cabinets after the New Year.
I don’t know what you said.
@@hesswoodwork Google Translate is you friend.
Hello!
www.hesswoodworks.com/