Citi Golf 1 4i Over Revving
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- website:- www.vehiclemai...
This popular car never really has any serious issues, but this time around we had to figure out why the idling speed was off the charts, enjoy the video, subscribe if you have not yet, until the next video, Safe Motoring.
Gary
I learnt how to change my rear breaks on my golf 1 from this channel. All the way from PTA
Awesome stuff keep them coming my car revs like that too will have something to keep me busy when I knock off during load shedding😂.
Thanks again from Botswana 🇧🇼
Thanks for the support Noah, let me know how it turns out. Gary
@@vehiclemaintenanceandrepai3790 Clean throttle body, make sure as well there are no vacuum leaks, because this will do the same.
A very good point Sean, vacuum leaks will result in similar symptoms. Gary
What will happen if you over revving....will is snep your cem
When overrevving an engine there is always a chance of engine damage, so simply do not do it, Wayne.
Hi there i believe you well, my citi 1.4i 2007 model is doing the same, since i watched this video i did everything wirh throttle body etc... It came down one conclusion when did thw test with the map sensor it did the exact same thing... im impressed i will definitely put in a new map sensor thank you
I am glad you found the video useful, thanks for supporting my channel with your visit.
Check pcv valve... vacuum line also if it has a cut or crack it could also throw your idle and then also cold start sensor aka temperature sender switch as well
Thanks for your insights and suggestions.
thank you so much, i did the same on my mark 3, changed the MAF sensor and all is well
With your channel some of us don't need to go to mechanics anymore you turn us to mechanic😁
Thanks for supporting my channel, Kay, I am glad to help.
Good day sir love your stuff keep it up 👍🏾 just a quick question... I have a mk3 golf 1.8i GSX and it over fuels timing has been set I bought a new map sensor at Diesel Electric a Bosch one but still my car over fuel and accelerate very sluggish what else can I do to sort it out?🤦🏾♂️thanks again for you awesome 👏🏾 videos
Thanks for supporting my channel Daniel, try changing the 4 pin sensor in the top of the water flange where the top radiator hose connects to, this is also a cold start sensor, if it malfunctions the car could over fuel.
Your a legend 👏 🙌 uncle! Thanks a million!
Thank You for the compliment SirBastian, and thanks for your continued support, very much appreciated.
I drive a 160i polo and cleaning your throttlebody are vital carbspray works does take all the stickyness out the throttle it will idle better
Thank you for your tip, appreciated.
Thanks a lot boet. Solved my problem 123. Awesome content.
Thanks for supporting my channel, Jaco it helps to build the channel.
Hi...my golf mk1 carb dont want to idle when choke is in only idle with choke in use what can be the problem please....already clean whole carb
Check the rubber base mount for cracks and tears, also take the idle jet out and clean it with a thin pin, then set the idling with the carb adjustments.
HI I LIKE YOUR VIDEO CANYOU ADVISE ME I HAVE NOTICED THAT MY MK1 1.6 GOLF CUTS OUT AFTER COUPLE MINUTE OF DRIVING OR IDLING. WHEN I REMOVED THE THROTTLE BODY SENSOR IT WAS IDLING HIGH BUT THE CAR DIDNT CUT OFF. AS SOON AS I PLIG IN BACK THE THROTTLE BODY SENSOR THE CAR IDLES BUT THEN IT CUTS OF LIKE DIE. DO YOU THINK ITS THE THROTTLE BODY OR THE SENSOR ON THE THROTTLE BODY?
Good Day Sir
Thanks, I will try map sensor
Which country a you situated
I am in South Africa.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Any advice for my polo 1.4i running super rich, checked timing, changed coolent sensor, replaced plugs, etc.. can a faulty map sensor cause this ?
Good day sir Denise here problem with golf 1.4iCitirox When clutch put in revs going high please explain what do do sir thanks
Hi... have the same issue. Followed the advice but it still gets stuck at 3k Rpm.
Hi my mk1 golf 1995 carb is high reving when I accelerate and put in clutch foot then it don't come all the way down either 1500 or 2000 revs is it plugs or cable not to sure🤔
Check the throttle cable adjustment it should have some play when idling, also check the idling adjustment, and also check the rubber base, they break as time goes on and sucks in the air making the car idle too high and erratic.
Hi Sir, I have a 2014 polo vivo automatic, would like to know how to drain the ATF oil in the transmission it take 3ltrs.
Hi Mark, thanks for supporting my channel, if the gearbox does not have a drain plug underneath then you have to remove the pan to drain the oil.
Where did you get your map sensor replacement from?
Diesel Electric
Thank you....mine is just that the fan goes on even sometimes while driving
Hi Tulonga, it could be that your multifunction 4 prong thermostat switch needs replacement.
@@vehiclemaintenanceandrepai3790 I think so too, any video on how to replace the anti-freeze water?
Coming soon, Tulonga
Hi Gary who can I get a hold of you?
What about the idling switch? If the idling switch wiring is tampered with what's going to be the problem?
Idling switch?
may I please be in contact with you. I've got a golf 1 that's got a rev/idle issue. When it turn it on the revs go up to 1200pm without any acceleration. When I drive it and I press down the clutch the car revs itself. I've changed the map sensor as well as clean throttle body with carb cleaner and the problem still is persistent
It’s a 1.4i
Same with my 1.4i citi sport
Seen that fualt before aswell with the map sensor on a golf
Ki Teon, yes sometimes a symptom can have multiple possibilities,
@@vehiclemaintenanceandrepai3790 that is true I've always believed that when it comes to any engine issue we must start with the basics
Well said Teon, the best way to solve certain issues is through a process of elimination starting with the most obvious.
@@vehiclemaintenanceandrepai3790 yes exactly correct
Can a mapsensor cause ur car to idle low
Yes it can
What spray is that what you're using? Great video BTW 👌
Cannot remember Clay, but any carb cleaner will do.
Enjoyed
Thanks for the support
My golf is carburetor also stuck on high rev exactly like that when I start and the pedal is not responding
Try adjusting the idling speed on the carb.
Good morning Gary, firstly thank you for the great content we absolutely love your channel. I bought my daughter a little mk1 1.4i 2006 golf, she loves the car however we need a bit of help. When the car is hot and she comes to a stop, clutch in and brakes the revs drop low then stabilises, it somehow feels like its going to stall however it doesn't. the revs just drops and then idles normally.
I cleaned throttle body.
Replaced map sensor.
Replaced the coolant sensor.
Cam belt service done.
249000 km on clock.
Can you recommend anything else?
Thanks again Warren
Hi Warren, thanks for the support, it seems you did everything I would given the situation, all I can think of is the throttle body itself. Gary
@@vehiclemaintenanceandrepai3790 in your opinion do you think I should send it for TB adaptation... However the idle speed only drops for s second and only when the engine is hot. Thanks for your response Gary.
Hey Warren, I do not think it necessary, if you can live with it, after all, it is not new anymore a little wear is acceptable. Gary
I had the same problem and it turned out to be the stepper motor on the throttle body. Only way to fix it was a complete throttle body replacement
Thanks for your feedback, Gary it will definitely benefit many.
I cleaned the throttle body and changed map sensor still idling high what can be the problem
Hi. Mine does the same. Did you find the fault
Hi...my 1.6i does the opposite. very low rough idle on cold start. cleaned TB and swapped MAP & temp sensors. idle is fine once engine warms up. Any ideas on what to check next?
Try changing the temp. sensor.
If it's the mpi like mine just burn it bruh saves alot of money, heartaches and stress cause the mp9 was perfect no needed to change from Bosch cause theres alot of comon problems with the CDI motor the 2009 model
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Hi have Chico 1.4 2008 model the revving County is not working I want to know what wrong please
The rev counter usually works off the coil, but it could be the dial itself, you must have it checked out at the auto electricians, Mzie
Hi
How to fix my car VW playa 1999 the idle is normal but real issues is from exhaust is that very fast not gentle how slove it
?????????
I cleaned throttle body and changed map sensor still idling high wat can be the problem
Vacuum leak
Hi there and name is Kabelo from Pretoria and i do have a problem of a throttle body (Vw microbus 2.6i), it keeps on sticking after pressing the accelerator pedal and the accelerator pedal becomes hard to press again. Can you please assist.
HI Kay, remove the accelerator cable and check it, may be seized.
My golf velocity 1.4 idles very high in the morning 2000rpm is it ok where should the idling be
That's a bit high Anthony, between 1200 and 1500 rpm when cold is acceptable.
Respect
Thanks for the support guys.
Could be the o2 sensor on the exhaust
Hi, Ismail thanks for supporting my channel and your interaction, possibly the co2 sensor but highly unlikely. It is always a good idea not to rule out any possibilities. Gary
My car jerks or looks like dying when pressing the fuel pedal. I replaced the Map sensor, injectors, and Oxygen sensor but there is still that jerking or hesitation when pressing the fuel pedal
How did you fix the problem, I'm experiencing the same thing?
@@delmaineballas4855 Eventually, replaced the coil & distribution cables and the problem was gone. Try that out first as the cheaper option. On the diagnostics machine it showed Lambda sensor and injectors....I replaced them too.
Can your map sensor on the 1.4i golf, cause the car not to start?
No Leonardo, it will give other problems but not starting is not one.
Could a map sensor cause misfire in starting
Yes, it could possibly cause misfiring, amongst other symptoms.
What CRC product is that?
I cannot remember but any brand should do.
Help, vw polo lose power while driving in high speed on gear 4 and 5
Then stop driving at high-speed Tiezon, Hahahaha. Is your clutch not slipping?
My mk1 it's not idling it's swich off it's self but when I unplug the throttle sensor it's idling what's wrong guys
The sensor is faulty
Which sensor
How can i reset the ecu
Hi, Olebogeng, I normally just disconnect the battery terminals for about 1 minute to reset the ECU.
@@vehiclemaintenanceandrepai3790 okay, thanks
My Golf mk 1 full injector start and dies(cant idle for long)
???, huh
Just out of curiosity ,is this mp9 or MPI .
No idea what you referring to Dhanesh, but thanks for visiting my channel
@@vehiclemaintenanceandrepai3790 the management system on the injected Citi golfs
@@dhaneshramdial4873 its mp9 management system
My throttle body doesnt have a evap pipe connection and its also 1.4i mp9....any advice?
This 1.4i with the evap stuff and oxygen sensor and catalytic converter is mpi
Timing
No
Siyabonga baba
UKONWABISA, THAMI
I THINK THATS YOUR PETROL PUMP BROTHER AJUSTING PETROL TO FILTER🤣😂
my Citi golf burn petrol so much
Hi Tobi, thanks for stopping by my channel your support is appreciated, there are many reasons a car uses too much petrol, Spark Plugs incorrect or worn, dirty air or petrol filters, incorrect tyre pressures, incorrect timing settings, also check the carb base rubber (if your car is a carb model) it may be leaking sucking air and the list goes on, it is best to start a process of elimination starting with the most obvious and cheapest, good luck.
Gary
Check for error codes on the computer box
Yes Ismail a diagnostic test could point one in the right direction, thanks for your input it is much appreciated.
i wish you were near me i need help my velociti 14 suddenly whille iddling sounds like it has a big cam in it but its stock standard so i cleaned my throtle body but it still does it it starts on the turn but just sounds like its misfiring my coil is new maybe you have some idee of what it could be thank you ...
Where are you from?
@@skatesneakerlover heya im in springs gauteng