Just installed these - took 10 minutes. I got the "cool blue" lights --- waaay cheaper than corksport. Can't say enough good things about it. I just got the map + dome lights...was $20 shipped. No brainer. Did it in my 3 iTouring hatch. It's the same for all 3's and 6's.
Just did the installation! Love the LEDs! The only problem with the trunk one is be careful!! Those little suckers are easy to crack. You are warned. But they're easy to replace so don't worry too much. Thank you PrecisionLED. Much Aloha from Hawaii!
Thank you for your interest. Unfortunately, we do not have a video for the hatchback model just yet. If we can get our hands on one out here in Los Angeles, California, we would be happy to make any video. Subscribe and check back for updates! Also, if you are having trouble, feel free to send us a couple photos at help@precisionled.com and we would be happy to help.
Hey pal, do you think is it possible to install the ambient LEDs that we have on 2016-2017 CX9 signature trim on non-signature? im talking about the blueish led around the gear shift stick
Do you have a video to show how to change the fog lights for the 2014 mazda3 S GT (Same generation as this video but hatchback) and the 2010 Honda Fit Sport?
Thank you for your interest. No, we do not have a fog installation video for the 2014 Mazda 3. However, the installation is the exact same as the halogen bulb. All you would do is remove the halogen, and insert the LED. As simple as that.
The new Premium 360 LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 360 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 360 LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 360 LEDs are backed by our lifetime warranty.
You didn't remove the reflectors from the regular lights in the front unit. Now they reflect the heat from the LED lights. To remove the reflectors, you need to disassemble that unit. 🤨
I bought a kit online and they sent me the same bulbs but they are non can-bus bulbs, and there is nothing in the owners manuals saying to use can-bus type bulbs.
We only sell high quality Canbus LEDs and recommend that you do install them to ensure you do not experience any dash errors, flickering, or other issues.
Thanks for the video. You said you'd do a video for the hatchback but I can't find it on your channel. Is is still not out yet? Also, are you sure that this wouldn't cause any errors to pop up during diagnosis or on the dash since LEDS consume less power than standard bulbs?
PrecisionLED Thanks for replying. I'm thinking about ordering your product but on your website there's a regular and Premium package with no explanation on the difference between the two. Also, do both come without the License plate, Trunk LED strip, and the vanity mirror LEDs? Thanks again
K Sadek You have to scroll down on the Premium Pages, the difference is explained. Both packages contain the same amount of LEDs for the same locations. License Plates, Trunk Strips, or Vanity Mirrors are options and are never included in Base Packages. The difference is the brightness. The Premiums are 2-3X brighter than the Standard.
Thank you for your interest. Yes, this video was shot on a 2014 model, however, it is specifically made for the 3rd generation Mazda 3, which includes the 2016. The installation process is very simple, and should be virtually the exact same as shown in the video.
Thank you for the interest. Unfortunately, not yet. however, if not identical, the installation process would be very similar to what is shown in this video. We will keep an eye out for the Mazda 3 hatch out here in Los Angeles for a video shoot. Subscribe for updates!
Thank you for your interest. You can find a direct product link in the description of the video. Feel free to ask if you have any questions or concerns.
Thank you for your interest. Do you have a 3rd gen Mazda 3? If so, I do not believe your vehicle comes with vanity mirror lights. And if it does, it is possible they are stock LEDs. If this is not the case, feel free to contact us directly at sales@precisionled.com, and we can recommend a compatible LED replacement.
+PrecisionLED thanks for reply¡, yes i have mazda 3rd gen 2016 and have light bulbs in the vanity mirror, its seem like a fusible but when i went to the store i didnt found it but i change the front and rear cabin lights and the change it's so fancy, also change the plate's light for led, greetings from México, thanks again for the video¡¡¡
Thank you for the interest. If not identical, the installation process would be very similar to what is shown in the video. We will keep an eye out for the Mazda 3 hatch out here in Los Angeles for a video shoot. Subscribe for updates!
replacing the license plate bulbs for the hatchback is so very easy compared to the sedan. you just need the use of a flat blade screwdriver to put pressure from the *exterior* of the hatch door, and it so easily comes off and is also to reinstall the cover! My problem only deals with having to remove the roof's dome light cover...it has been a ***ch to remove, and I'm kinda given up...all the other bulbs were installed over 1.5 months ago...
Thank you for your interest. No, it would not be the exact same, however, it would be similar to what is shown in the video. The installation process is very similar for all vehicles. I would recommend having a glance at some of our other DIY videos as well via our How-to page (www.precisionled.com/how-to-videos.html).
Do you have a 3rd gen Mazda 3? If so, I do not believe your vehicle comes with vanity mirror lights. And if it does, it is possible they are stock LEDs. If this is not the case, feel free to contact us directly at sales@precisionled.com, and we can recommend a compatible LED replacement.
We do not recommend this, we only sell high quality Canbus LEDs to ensure you do not experience any dash errors, flickering, or other issues with your LEDs.
We are not so sure about the products that VLED offer, but we believe we at PrecisionLED carry the highest quality LED bulbs on the market, which we back with a lifetime warranty. They will be 2-3x brighter than your halogens, and are expected to last the lifespan of the vehicle.
If it is not identical, it should be very similar. If you like, you are welcome to send us over photos via email at help@precisionled.com and we would be happy help.
There is a variety of bulb sizes that are used for the installation. What LEDs in particular are you asking about? You are welcome to email us directly for further information. You can reach us at help@precisionled.com.
We appreciate the feedback! The LED color temperature used in the installation videos is just what is requested by the owner of the vehicle. It is not necessarily what we have installed in our vehicles, nor what we recommend.
Thank you for adding value with these videos. Your videos were the deciding factor in purchasing the led kit from your co vs the competition
Just installed these - took 10 minutes. I got the "cool blue" lights --- waaay cheaper than corksport. Can't say enough good things about it. I just got the map + dome lights...was $20 shipped. No brainer. Did it in my 3 iTouring hatch. It's the same for all 3's and 6's.
Thanks for the support!!
Just did the installation! Love the LEDs! The only problem with the trunk one is be careful!! Those little suckers are easy to crack. You are warned. But they're easy to replace so don't worry too much. Thank you PrecisionLED. Much Aloha from Hawaii!
Thank you for the feedback, and the tip!
Thanks for the guide. Did all interior lights. Dome gave me a bit of trouble but nothing crazy.
whats the size needed for the interior lights ?
I too would like to see a video for the hatchback. And the extra hatch/trunk lightstrip/bar install.
Thank you for your interest. We will keep an eye our for a Mazda 3 Hatch out here in Los Angeles for an installation video. Subscribe for updates!
Thank you so much for posting this video. I plan on buying interior lights from you guys next.
We are happy to be of assistance. Feel free to ask if you have any additional questions or concerns.
Excellent video, was able to follow step by step with no issues, the 8000k led bulbs are amazing compared to the stock bulbs, great product 👍
Thank you for the positive feedback!
This video is PERFECT!! Thanks!
+Shannon Lethbridge Thanks!
Thanks a lot for your help on this much appreciated your idea to put a tape and pull it out was awesome.👍👍👍
Thanks for tuning in!
This helped me out so much with doing the lights for my 2016 Mazda3 i touring!
+Catherine Nguyen That's what we are here for!
Simple yet detailed tutorial. Thanks
Excellent, very clear demonstration.
Thank you for the kind words!
Great idea about the tape on the bulb.
Pliers to, on the connector.
Thanks for watching!
Excellent video. Well presented, and excellent knowledge all around. Hats off to you, sir.
We are glad to be of assistance!
Glad if you could show a video on HID installation (for the same vehicle) for the low and high beam as well. thanks
Kushal Indivar Hi Kushal, we do not deal with HID products. Search "Xenon Supply" on TH-cam
ok, thanks
Please do a video on replacing all the low beam, high beam and front parker lights please!!
+Nevsack63 If we get access to another vehicle, we will!
+PrecisionLED Thank you
How about a video for the hatchback? I had hard time disassembling the hard cover in my trunk
Thank you for your interest. Unfortunately, we do not have a video for the hatchback model just yet. If we can get our hands on one out here in Los Angeles, California, we would be happy to make any video. Subscribe and check back for updates! Also, if you are having trouble, feel free to send us a couple photos at help@precisionled.com and we would be happy to help.
Is it a 2015 hatchback ? If you did it, put a video for me lol
What type of light bulb did you use for the trunk?
Would have been nice to see finished product! But If I understood you correctly my 2015 3 is already set up for lEDs.
Thanks for the suggestion! Yes, the package linked in the description box below the video is compatible with your 2015 Mazda 3!
Huge huge help thanks homie..
Thanks for watching!
Hey pal, do you think is it possible to install the ambient LEDs that we have on 2016-2017 CX9 signature trim on non-signature? im talking about the blueish led around the gear shift stick
Great work!
Thank you for tuning in!
Do you have a video to show how to change the fog lights for the 2014 mazda3 S GT (Same generation as this video but hatchback) and the 2010 Honda Fit Sport?
Thank you for your interest. No, we do not have a fog installation video for the 2014 Mazda 3. However, the installation is the exact same as the halogen bulb. All you would do is remove the halogen, and insert the LED. As simple as that.
great video. clear and explained very well
Thank you for he kind words!
Thank you! In video are 6000K or 8000K LED lights?
Danijel Ivezić 6000K
Can you please explain to us the difference between the 2 available kits on your website?
Premium vs regular
Thanks
The new Premium 360 LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 360 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 360 LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 360 LEDs are backed by our lifetime warranty.
Is the trunk light for the 3rd gen sedan, the same as the hatch? Do you have a video for the hatch available?
Please add a close up shot of the plastic clips being removed. Took me a while to figure out that I had to pry the inner circle of plastic.
Thanks for the suggestion, we will keep that in mind for future install videos!
Thanks for this video!!
Thank you for tuning in!
31 mm x2 and 28mm 1x ?
what about reverse are those T20 w21w or T15 ?
Thanks!!!
Thanks for watching!
You didn't remove the reflectors from the regular lights in the front unit. Now they reflect the heat from the LED lights. To remove the reflectors, you need to disassemble that unit. 🤨
I bought a kit online and they sent me the same bulbs but they are non can-bus bulbs, and there is nothing in the owners manuals saying to use can-bus type bulbs.
We only sell high quality Canbus LEDs and recommend that you do install them to ensure you do not experience any dash errors, flickering, or other issues.
Great.. but does the LED support the dimming function when I close the Door of my car? or it has only one level of brightness?
+Muhammad Sherby It will dim as well but in stages rather than gradually.
Got a video on how to replace lowbeam headlight bulb?
+Aaron D Unfortunately, we do not at this time.
thank you!
Thanks for watching!
Thanks for the video. You said you'd do a video for the hatchback but I can't find it on your channel. Is is still not out yet?
Also, are you sure that this wouldn't cause any errors to pop up during diagnosis or on the dash since LEDS consume less power than standard bulbs?
K Sadek You will not receive any error codes. We moved locations so we had to take a break from shooting videos. We will resume soon.
PrecisionLED Thanks for replying. I'm thinking about ordering your product but on your website there's a regular and Premium package with no explanation on the difference between the two.
Also, do both come without the License plate, Trunk LED strip, and the vanity mirror LEDs?
Thanks again
K Sadek You have to scroll down on the Premium Pages, the difference is explained. Both packages contain the same amount of LEDs for the same locations. License Plates, Trunk Strips, or Vanity Mirrors are options and are never included in Base Packages. The difference is the brightness. The Premiums are 2-3X brighter than the Standard.
Hi, are these procedures the same for Mazda 3 2016 version? i.e exact same way of removing/changing of lights?
Thank you for your interest. Yes, this video was shot on a 2014 model, however, it is specifically made for the 3rd generation Mazda 3, which includes the 2016. The installation process is very simple, and should be virtually the exact same as shown in the video.
do you have a video for the 2014 2015 mazda 3 hatch?
Thank you for the interest. Unfortunately, not yet. however, if not identical, the installation process would be very similar to what is shown in this video. We will keep an eye out for the Mazda 3 hatch out here in Los Angeles for a video shoot. Subscribe for updates!
Please do a video how to replace the LOW beams!!!
We actually do have a headlight installation video, which you can find here: th-cam.com/video/s82nSF2mmwo/w-d-xo.html
Are the bulbs used in this video CRYSTAL WHITE OR COOL WHITE? Thanks!😁✌
In this video we installed the 6000k, crystal white. Thanks for watching!
I have a 2016 Mazda 3 and would like to do this. is there a direct link to see the price?
Thank you for your interest. You can find a direct product link in the description of the video. Feel free to ask if you have any questions or concerns.
are there any other way i can get to the license plate lights? like from the exterior itself?
No, you are not able to do it from the exterior. Please reference 4:30 in the video for license plate light installation.
What type /size LED would I need for the trunk in a 2015 Mazda3?
The trunk would use a T10 fitment, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
Hi, do you need CANBUS LED for avoiding system errors?
Yes, we only sell high quality Canbus LEDs to ensure you do not experience any dash errors, flickering, or other issues with your LEDs.
where can i found a video of hiw install hid head lights on a mazda 3 2015???thx
Thank you for the interest. You can find the installation video here: th-cam.com/video/s82nSF2mmwo/w-d-xo.html
Do you guys ship to Australia? I'm keen to get lit up with the 8000k set
+Aaron D Yes! We ship to Australia.
Amazing video.. Do you people ship the same LED's to Saudi Arabia ?
+Asoo0oom Yes, we do!
+PrecisionLED I would like like this package for 2016 Mazda 6 to Saudi Arabia
+أحمد الحرازي ما تلغي الضمان هذي؟.
لالا اذا مافيها تقطيع سلك ماتلغي اي شي انا وكبت عندي وكل شي تمام
أحمد الحرازي اوكي مشكور يا الغالي.
Is this on eBay?
in the still of the reverse light comparison, is it 6000k or 8000k?
+Eman Toluei 6000K
i want to change the vanity mirror lights but itsn't led type for that
Thank you for your interest. Do you have a 3rd gen Mazda 3? If so, I do not believe your vehicle comes with vanity mirror lights. And if it does, it is possible they are stock LEDs. If this is not the case, feel free to contact us directly at sales@precisionled.com, and we can recommend a compatible LED replacement.
+PrecisionLED thanks for reply¡, yes i have mazda 3rd gen 2016 and have light bulbs in the vanity mirror, its seem like a fusible but when i went to the store i didnt found it but i change the front and rear cabin lights and the change it's so fancy, also change the plate's light for led, greetings from México, thanks again for the video¡¡¡
Thank you for the feedback!
What's the size of Trunk Light Bulb
It is smaller than license light
Thank you for your interest. Both lights actually would use the same T10 bulb fitment. However, the license plate lights use more LED boards.
What's the bulb size for the position lights for this car?
+Aaron D What do you mean by "position lights"?
Same for a 2015 Mazda 3 hatch?
Thank you for the interest. If not identical, the installation process would be very similar to what is shown in the video. We will keep an eye out for the Mazda 3 hatch out here in Los Angeles for a video shoot. Subscribe for updates!
replacing the license plate bulbs for the hatchback is so very easy compared to the sedan. you just need the use of a flat blade screwdriver to put pressure from the *exterior* of the hatch door, and it so easily comes off and is also to reinstall the cover! My problem only deals with having to remove the roof's dome light cover...it has been a ***ch to remove, and I'm kinda given up...all the other bulbs were installed over 1.5 months ago...
please give me fast feedback for Mazda6 is it the same ?????
Thank you for your interest. No, it would not be the exact same, however, it would be similar to what is shown in the video. The installation process is very similar for all vehicles. I would recommend having a glance at some of our other DIY videos as well via our How-to page (www.precisionled.com/how-to-videos.html).
are these led lights only available in white?
No, we carry a variety of different LED colors. Here is a color chart for reference: www.precisionled.com/media/stock/Bulb_Colors_LED_Bulb_450x80.jpg
8000k can use mazda 3 2015? Does not affect?
+Abrahulk Mex Yes, 8000K is just a different color temperature. It will be white with a hint of Blue.
question is the 36 or 39 mm lamps
+Joel Johansson 36mm
How to install to Mirrors Sun Visor Light?
Do you have a 3rd gen Mazda 3? If so, I do not believe your vehicle comes with vanity mirror lights. And if it does, it is possible they are stock LEDs. If this is not the case, feel free to contact us directly at sales@precisionled.com, and we can recommend a compatible LED replacement.
Is it safe to use non can-bus bulbs
We do not recommend this, we only sell high quality Canbus LEDs to ensure you do not experience any dash errors, flickering, or other issues with your LEDs.
How do these leds compared to vled offers?
We are not so sure about the products that VLED offer, but we believe we at PrecisionLED carry the highest quality LED bulbs on the market, which we back with a lifetime warranty. They will be 2-3x brighter than your halogens, and are expected to last the lifespan of the vehicle.
is the rear the same for the hatchback model?
If it is not identical, it should be very similar. If you like, you are welcome to send us over photos via email at help@precisionled.com and we would be happy help.
Thanks for the help, I figured out how to do it. Simple pop out of the lens. ** Illegal for these in Hawaii on ur license plate **
Anybody know the size of those bulbs he replaced.....
There is a variety of bulb sizes that are used for the installation. What LEDs in particular are you asking about? You are welcome to email us directly for further information. You can reach us at help@precisionled.com.
PrecisionLED all the interior.....
What size bulb was the reverse?
The reverse light would be a T10 10SMD bulb.
Shipping to Colombia? And shipping price?
Yes, we do ship all over the world, including to Colombia. We have an international shipping flat rate of 34.99 USD.
Hi i will buy the lamps how mm?
The map and dome would be a 31mm, which you can find here: www.precisionled.com/premium-festoon-31mm-canbus-3smd-5730-led.html
I want to change the head light though
www.precisionled.com/premium-h11-cree-hl-gl-headlight-led.html
PrecisionLED but where is the mazda 3 headlight installation tutorial?
and what happens with the warranty of my car?
Skill to Kill It has no effect on the warranty of your car.
PrecisionLED im in guadalajara mexico , you can send me form there?
Skill to Kill Yes
Stop lights?
We do not advertise upgrading your brake lights to LED because they may hyper flash when ignited.
6:31
2011 MAZDA 3 PLZ!!!!!!!!!!! 2011 MAZDA 3 PLZ!!!!!!!!!!! 2011 MAZDA 3 PLZ!!!!!!!!!!! 2011 MAZDA 3 PLZ!!!!!!!!!!! 2011 MAZDA 3 PLZ!!!!!!!!!!!
+Carlos Elizondo Spasm
We will keep an eye out for one here in Los Angeles, California for a video shoot. Subscribe for updates!
Great video.. Ugly lights. Blueish
We appreciate the feedback! The LED color temperature used in the installation videos is just what is requested by the owner of the vehicle. It is not necessarily what we have installed in our vehicles, nor what we recommend.
you´re right, thanks for the video keep up the good work
I have a 2016 Mazda 3 and would like to do this. is there a direct link to see the price?
Direct Product Link:
goo.gl/bo9WaH