O WOW Andy you watched my video 😍 I was just about to watch last part of your 3 night deserted island upload 👌 I'm your subscriber like over 5 years - great news you stepped to my channel and like the video 😊 would you like me to make and send you some lure ??
Thank you for watching till the end 😊 I do have a silicone form to cast this little lipless 😉 but this size is better to fish in the spring or early summer, so I think I'll make a video next year 👌
@@nanglerspinninginchina8727 O that's interesting one 👀 I spend in China total of two month backpacking - caught only one Tilapia around 30cm in private fish pond, and in the wild only small fishes - max 15cm. In the sea on the south few small groupers and sea breams while doing rock fishing... So rather sad place for a fisherman...
@@SuchaJerkCustomLures pretty much…but we need to take what there is (if you have time take a look to my channel). Considering that I am from the south of Italy, a paradise for fishing, it is a bit downgrading to fish here, but is still fun
This is why are such a hot commodity because back in the great depression when fishing first started they had to make their own Lures because I couldn’t afford the ones they had to buy and the ones that were made homemade of the ones that are the most valuable I love parts of history I so love creativity
I'm now fishing exclusively my own lures 🙂 it gives so much more satisfaction + you can adjust the lure to the exact fish or even spot you'll be fishing at 👌
@@SuchaJerkCustomLures It's Good for someone that's not sure whether it could become a hobby or not, they can get a taste of what it takes before investing in more tools. I have an electric scroll saw and a table top belt sander so an airbrush would probably do me. I have an air compressor but It's a larger one for bigger air tools so I'd probably need adapters to make a small airbrush work with it. I give up lure fishing years ago because of a back injury but if I end up getting a kayak, I'd be sitting as it hurts when I stand for too long, I end up in agony for a few days 😥
@@pa_maj.MARTINI-van-MAN well so kayak Sims to be a good solution, or perhaps a belly boat 🤔 but that still probably put pressure on the spine... Making them just for sake of doing so doesn't make sense, the real satisfaction is when you catch on your own creation 😊
@@SuchaJerkCustomLures I started watching kayak fishing videos as my friend uses one, then I realised I could fish easier with lures again. I have plenty of free time gaps to make them. My lures I made years ago from mahogany brush shaft handles, swimmers, hard to carve and I didn't know what I was doing at that time 😂 but now I've a better idea thanks to yourself and TreysArt 👍 I's like a kayak because I'd sea fish in it too, I'm 1.5 miles from the coast.
Excellent video(s)! I wanted to share something I learned the other day..... BAKING SODA is a super glue accelerator! Ye! Uh huh! Sure is! And and excellent filler as it make the glue grittier and coarser. It also adds weight, which can be good or bad, just as long as you know. But yes, it speeds dry time up dramatically for CA glue aka super glue!
Thank you for the tip 😉 I do know super glue and baking soda mixture - I don't use it though as a filler - to hard to file compare to the wood filler - so what time you save on the hardening, you'll waste on sanding 😉 with that being said I do use it as a fixer of the internal through wire due to its strength, only leaving small gap from the top to finish it with the wood filler and sand it smoothly 😉
@@SuchaJerkCustomLures Oh I saw your filler system and LOVE it!!! I love how you use a single wire system too.....genius! I hope to soon make some lures like yours and cheat a little with some high resolution 3D resin printing. Don't worry.....there's still LOTS of hand work to be done with them I promise! I'll just keep watching and leaning from you wonderfully laid out tutorials! Thanks for all you do for the fishing community!
@@damian8mac8 I do not sell my lures - not enough spare time for it, and I don't want it to be my income source - as than it would loose the joy of a hobby 🙂 in terms of being expensive - if you would buy all the materials listed in this wideo - and made yourself 10 lures - same finish but even different lure types made out of balsa - the cost probably would be comparable to the store bought ones (or potentially even cheaper) but of course human nature tells us to improve on your craft and than the list of spending doesn't have an end 😁 so in the end is at least as expensive as fishing itself 😉
@@waterdoglures1352 The first one and the last one is called Asp (Leuciscus aspius), the second one European Chub (Squalius cephalus) and the third one was Ide (Leuciscus idus). They're all European fish species - I'm leaving in Poland 😉
Спасибо 🙂 размещение, если вес только по опыту или по разным типам приманок, которые я или другие вы, клубни, сделали и стремитесь к аналогичному действию. Количество груза, вы можете приклеить светодиоды разного веса к телу приманки и проверить, плавает она или уже тонет 😉
I am a beginning lure maker having trouble getting the bill size right. How far outside of the lure body should a bill extend? If it's rounded bill on a jerkbait, how wide should the rounded part be in relation to the lure? What angle should a square bill sides be, and at what point should the bill stop?
Well, that is not easy question to answer in a comment section. What I would suggest is to sign up to that Facebook group and ask there ( a lot of helpful and experience lure makers in one place) facebook.com/groups/320429427999060/?ref=share
Just a tip for anyone that has no exces to polycarbonate or something like that; just use a beer botlle cap you hammered flat and cut it to your desired shape.
Scratching through the comments to see how many comments contained the word balsawood. Don't know what to attribute that to. The of use jelutong is a fantastic wood and works as easy as balsa. You ever consider using lead for eyes? And thanks for the video .
I don't thing this yelutong wood is available in Poland 🤔 normally I do the 3D eyes myself from holographic foil and black tape + UV resin - here I did the simple ones as the idea of this tutorial was beginner level lure 😉
Thank you 🙏😊 I'm buying the bib material - circuit board - shipping it to person from which I buy the bib and he cuts on CNC machine the shapes that I choose from his offer 😉 all done here in Poland. All the best 👋🇵🇱
Thanks mate ☺️ the first and the last one is called Asp - kind of poor people tarpon, as we call it 😅 the the second one is European Chub and the third one is called Ide 🙂 all 3 are related to Carp 😉
@@khyeabbott9391 yes, we have both 😁 Pike locally in my City (although I'm not so keen on them - as the other species are more readily available) 👌 and for trout I need to travel few hours... In this season I've only caught one brownie 😟 I've seen you leave closer to the mountains now - waiting for trout minnow build to catch episode 👌😉
Okay fair enough! Yeah a couple of hours away the season just ended this weekend so I'll see what I can make in the next 6 months before opening season 🤔
Да, это был суперклей, рекомендую для постоянного соединения двух половинок, когда провод вставлен 👌 но для временного соединения двусторонний скотч работает лучше, здесь я использую только SG, так как приманка была сделана с минимумом инструментов и продукты, для начинающих 😉
Grazie :) il prodotto è smalto per unghie UV, la luce UV è necessaria per curarlo, renderlo duro. Lo uso perché mi ha permesso di finire l'esca in un giorno ed è anche più economico e più facilmente disponibile della resina epossidica in 2 parti, quindi migliore per i principianti ;)
I know, however since I already had the balsa wood dust, and the aim of the video was to use as few tools and ingredients (as that's what beginner will have available) I didn't want to add one extra. Aside of that I'm not a fan of using super glue + baking soda to fill the lead holes - especially in balsa - is just to hard and after it doesn't sand even. Always use filler putty instead. The only exception is in my Popper build - where I cover the through wire with it for the strength, and only the surface with putty for smooth and even finish ;)
Unfortunately for now there is no place... I'm not selling my lures... Just not enough time between my day job, family, fishing and making lures on You Tube 😪 please subscribe to the channel if I will start selling them for sure I will mention it in my videos 😉
Tak, kilka sie znajdzie disclaimer: sa to woblery moim zdaniem boleniowe, na ktore skutecznie lowie bolenie. Nie robie typowych z prostym sterem do ekspresu, bo nie lubie bolkow lowic w taki sposob 😉 th-cam.com/video/1YzbriyQpSc/w-d-xo.html th-cam.com/video/IWkXqEUZtwM/w-d-xo.html th-cam.com/video/_M7liNgw-Fg/w-d-xo.html th-cam.com/video/-plCXprfogU/w-d-xo.html th-cam.com/video/ofEtBxpmSGM/w-d-xo.html
@@fauzipanjihermawan576 I don't know your budget or if it is available where you live... But the reason for me now exclusively using laminate lips is that they're basically unbreakable !! 🙂
@@domba8892 the only thing is, thinking about it, I would say it wouldn't have any swimming action 🤔 best you could hope for is flatter on the drop, but while jerking would most likely swim straight (there is no enough surface in the pointy beak to cause water turbulence)
@@SuchaJerkCustomLures ok I understand. you couldn't do the work the dog technique with it ? I just noticed that the bait should catch very well in the sea :)
Yes it is balsa wood - because is soft and sand it well I thought would be good choice for beginner level 😉 I myself started making smaller lures from balsa 🙂
Here, since it's a small lure for light tackle 0.5mm stainless steel through wire 😉 as the video shows strong enough 👌 people sometimes are scared of thin wire - but if you'll fish with 7lb leader it's obvious the wire still will be the stronger point 😉
Tak, żeby był gotowy tego samego dnia używam tutaj lakieru hybrydowego UV plus latarki UV, teraz już mam taką lampę do paznokci i jest bardziej efektywna 😉
@@SuchaJerkCustomLures too far frome me :) Im from Kaliningrad near with Poland . Łyna river come to us through the border. Chub and ASP is my favorite fishing but ASP is ultra rare here . . .he just ignore all my lures (Jackall , ZipBaits and others). But usually if u get bait from ASP it will be big fish : )
@@Lastlightx94 if you into lure making - try to do 7-9cm WTD lure - it's the biggest fun to get Asp on top water 💦💥 they often miss the target but the bites are very visual 😍
@@SuchaJerkCustomLures yes baits are real awesome. ill try do lure tommorow with this guide. My top of topwater lures is DUO poco poco and Jackall Chubby Pencil. Wish u good luck with this chanell. Good Job.
Sure you can - if that would be for survival situation and the main goal is to obtain some fish protein - definitely 😉 If it's your passion, than why not to go that extra mile to have more fun of it 🥰
È lungo 5 cm e pesa 4,5 g - quindi lancia molto lontano - progettato per la pesca del tonno mac - ma in acqua dolce è molto buono per aspidi e persici :)
Nice, reminds me of when I was in school and made a heap of wooden lures.
O WOW Andy you watched my video 😍 I was just about to watch last part of your 3 night deserted island upload 👌 I'm your subscriber like over 5 years - great news you stepped to my channel and like the video 😊 would you like me to make and send you some lure ??
Nice job man! Gonna gather some materials over the next week or so and start making some myself. Thanks for the inspiration.
Thank you 🙏 I say give it a go, nothing beats the satisfaction of catching one on your own lure 🥰
@@SuchaJerkCustomLures yeah man I'm definitely gonna do it
Love this, the action is great!
Seeing it produce is really cool!
Yeah... good summer times 😊 few more months and some spring fun will start again 😄 now at best is to how for one fish a month 🤞
Love to see the idea getting spread! Nice vid!
Thank you 😊 I really enjoyed making this simple lure and was over the moon with that session results - best day fishing this year so far 🥰
Great lure as always, nice job brother
Thank you brother 🙏 I liked your last sinking minnows as well 👌
Chub and Asp are my favorite species, nice job.
Nice 👍 for me Asp - and my favourite way is top water WTD fishing for them 😁 sadly this season only empty attacks - no hook ups yet...
Привет я не силен в английском языке, но хочу сказать что это великолепно, делай больше видео! Спасибо, всего хорошего тебе и твоей семье!
Спасибо ☺️ Рад, что вам понравилось 🙂 Каждую неделю выкладываю новое видео 😉 Все самое лучшее из Польши 👋
That's awesome. Thanks for sharing and would like to see the little lure at the end of the video made too.
Thank you for watching till the end 😊 I do have a silicone form to cast this little lipless 😉 but this size is better to fish in the spring or early summer, so I think I'll make a video next year 👌
Beautiful Minnow 👍
Thank you 🙏 I'm happy you liked it 😊
Love it. Nice lure, cracking video
Thank you 🙏 be sure to check the next upload - will include special lure and some fishing with it as well 👌
good video. nice thing that you did it simple, so anyone can try. Do video for the small one.
Thank you :) I already did one with smaller lure - just in case that you missed it ;)
th-cam.com/video/rnqJt49nrZg/w-d-xo.html
Thanks for the tips and for your passion in doing this videos!
Well it is a lot of work, but comments like this make it all worthwhile 🥰 thank you 🙏 all the best from Poland 🤙
@@SuchaJerkCustomLures you deserve it. Greetings from an Italian angler in China
@@nanglerspinninginchina8727 O that's interesting one 👀 I spend in China total of two month backpacking - caught only one Tilapia around 30cm in private fish pond, and in the wild only small fishes - max 15cm. In the sea on the south few small groupers and sea breams while doing rock fishing... So rather sad place for a fisherman...
@@SuchaJerkCustomLures pretty much…but we need to take what there is (if you have time take a look to my channel). Considering that I am from the south of Italy, a paradise for fishing, it is a bit downgrading to fish here, but is still fun
I see that @marlingbaits one day build to catch is CATCHING on in the community
Yes it definitely did 🙂 it is actually very nice chalange 👌
Nice video bro...n beatiful minnow..👍
Thank you 🙏 maybe not so beautiful the lure - but worked which is the most important part 🎣
This is why are such a hot commodity because back in the great depression when fishing first started they had to make their own Lures because I couldn’t afford the ones they had to buy and the ones that were made homemade of the ones that are the most valuable I love parts of history I so love creativity
I'm now fishing exclusively my own lures 🙂 it gives so much more satisfaction + you can adjust the lure to the exact fish or even spot you'll be fishing at 👌
Fishing is at least several hundred thousand years old!
That has excellent action!
Thank you ☺️ you can give it a try yourself - satisfaction from catching on your own lure is priceless 😉
Молодец! Хорошая работа. Лайк+подписка. Смотрю и учусь, учусь....
Спасибо 🙏 Я рада, что вам понравились видео - наслаждайтесь и попробуйте сделать свое 😉
Just found your channel. Absolutely love it!
I'm happy to hear that 🙂 comments like your make all the effort worthwhile 🥰
Sangat bermanfaat,dan bisa dipraktekan di rumah,trima kasih telah berbagi ilmu
Sama-sama itu adalah ide bahwa Anda tidak memerlukan alat mewah untuk membuat umpan pancing yang bagus
A great little lure and with little tools too. The other great thing was it fished well 👍
They all fish well 😜 but for the time, effort and money spend it did pay back already big time 😁
@@SuchaJerkCustomLures It's Good for someone that's not sure whether it could become a hobby or not, they can get a taste of what it takes before investing in more tools. I have an electric scroll saw and a table top belt sander so an airbrush would probably do me. I have an air compressor but It's a larger one for bigger air tools so I'd probably need adapters to make a small airbrush work with it. I give up lure fishing years ago because of a back injury but if I end up getting a kayak, I'd be sitting as it hurts when I stand for too long, I end up in agony for a few days 😥
@@pa_maj.MARTINI-van-MAN well so kayak Sims to be a good solution, or perhaps a belly boat 🤔 but that still probably put pressure on the spine... Making them just for sake of doing so doesn't make sense, the real satisfaction is when you catch on your own creation 😊
@@SuchaJerkCustomLures I started watching kayak fishing videos as my friend uses one, then I realised I could fish easier with lures again. I have plenty of free time gaps to make them. My lures I made years ago from mahogany brush shaft handles, swimmers, hard to carve and I didn't know what I was doing at that time 😂 but now I've a better idea thanks to yourself and TreysArt 👍 I's like a kayak because I'd sea fish in it too, I'm 1.5 miles from the coast.
Nice Videos and inspiration. Keep it up nice work.
Thank you 🙏😊 I hope.you give this lure a try yourself 🤞
Very good my friend is very detailed
Thank you my friend 🙏🙂 all the best from Poland 👋🇵🇱
Świetne filmy. Przyjemnie się ogląda leci subik 😉
Dzięki 🙂 witaj w klubie 👋 pozdro
Excellent video(s)!
I wanted to share something I learned the other day.....
BAKING SODA is a super glue accelerator! Ye! Uh huh! Sure is! And and excellent filler as it make the glue grittier and coarser. It also adds weight, which can be good or bad, just as long as you know.
But yes, it speeds dry time up dramatically for CA glue aka super glue!
Thank you for the tip 😉 I do know super glue and baking soda mixture - I don't use it though as a filler - to hard to file compare to the wood filler - so what time you save on the hardening, you'll waste on sanding 😉 with that being said I do use it as a fixer of the internal through wire due to its strength, only leaving small gap from the top to finish it with the wood filler and sand it smoothly 😉
If you check my pike Jerkbait video you'll see what I mean 🙂
@@SuchaJerkCustomLures Oh I saw your filler system and LOVE it!!! I love how you use a single wire system too.....genius! I hope to soon make some lures like yours and cheat a little with some high resolution 3D resin printing.
Don't worry.....there's still LOTS of hand work to be done with them I promise!
I'll just keep watching and leaning from you wonderfully laid out tutorials!
Thanks for all you do for the fishing community!
@@justinmurphy2227 it is a lot of extra work(compare to lure making off camera) but comments like your makes it all worthwhile 🥰
Awesome video! Very good work
Thanks mate 😊 I'm happy you enjoyed it 🙂
@@SuchaJerkCustomLures is this an expensive craft to get into? And do you sell your lures?
@@damian8mac8 I do not sell my lures - not enough spare time for it, and I don't want it to be my income source - as than it would loose the joy of a hobby 🙂 in terms of being expensive - if you would buy all the materials listed in this wideo - and made yourself 10 lures - same finish but even different lure types made out of balsa - the cost probably would be comparable to the store bought ones (or potentially even cheaper) but of course human nature tells us to improve on your craft and than the list of spending doesn't have an end 😁 so in the end is at least as expensive as fishing itself 😉
@@SuchaJerkCustomLures keep up the good work friend. It's satisfying to watch these videos
Dope video!
Thanks bro 🤙 happy you liked it 🙂
Nice fish footage subbed!
Thank you 🙏 welcome on board 🎣
Good job! 🙂
What kind of fish are you catching?
Thank you 🙏😊
@@waterdoglures1352 The first one and the last one is called Asp (Leuciscus aspius), the second one European Chub (Squalius cephalus) and the third one was Ide (Leuciscus idus). They're all European fish species - I'm leaving in Poland 😉
@@SuchaJerkCustomLures Thank you.. I’ve never been to Poland. Thanks for sharing your lure making expertise and fishing experience. 🙂
Amazingly beautiful
Thank you 🙏 apriacite the feedback 😌
good fish mate
Thanks mate ☺️ finally some catches 🎣
Все очень понравилось!!!! Отлично, спасибо! Вопрос: как определить вес грузиков и место их вставки?
Спасибо 🙂 размещение, если вес только по опыту или по разным типам приманок, которые я или другие вы, клубни, сделали и стремитесь к аналогичному действию. Количество груза, вы можете приклеить светодиоды разного веса к телу приманки и проверить, плавает она или уже тонет 😉
I am a beginning lure maker having trouble getting the bill size right. How far outside of the lure body should a bill extend? If it's rounded bill on a jerkbait, how wide should the rounded part be in relation to the lure? What angle should a square bill sides be, and at what point should the bill stop?
Well, that is not easy question to answer in a comment section. What I would suggest is to sign up to that Facebook group and ask there ( a lot of helpful and experience lure makers in one place)
facebook.com/groups/320429427999060/?ref=share
What kind of wood you use,...look soft and easy to cut
It's a balsa wood 😉 and indeed is soft and easy to cut - that's why I chose it to show how to make lures for inexperienced lure maker 😉
Just a tip for anyone that has no exces to polycarbonate or something like that; just use a beer botlle cap you hammered flat and cut it to your desired shape.
Nice tip 👌 also by choosing the right beer you can match your colour scheme 😁
@@SuchaJerkCustomLures I got the idea from Max from the channel 'Max Moore Fishing' so al credits to him. Check him out, he makes some awesome lures!
Scratching through the comments to see how many comments contained the word balsawood. Don't know what to attribute that to. The of use jelutong is a fantastic wood and works as easy as balsa. You ever consider using lead for eyes? And thanks for the video .
I don't thing this yelutong wood is available in Poland 🤔 normally I do the 3D eyes myself from holographic foil and black tape + UV resin - here I did the simple ones as the idea of this tutorial was beginner level lure 😉
@@SuchaJerkCustomLures got that. Hello all the way to Poland 🇵🇱😀 you tube sorta shrunk the world.
Great video thanks
Thank you 🙂 I'm happy you liked it 👌
Hello friend, excellent videos, check where you buy the paddle or bib template for the lures, greetings from Chile
Thank you 🙏😊 I'm buying the bib material - circuit board - shipping it to person from which I buy the bib and he cuts on CNC machine the shapes that I choose from his offer 😉 all done here in Poland. All the best 👋🇵🇱
Great little lure! What was last fish - asp?
Hi Ian ☺️ thanks 🙏 yes the last fis was a Asp 🎣
good job my friend 👍
Thank you 🙏 I'm happy you liked it 🙂
Like ist save 😉👍
Amazing!!!
Thank you 🙏 I'm happy you liked it 🙂
@@SuchaJerkCustomLures you're welcome. Waiting for the next week.
@@evandrosantos900 ok 😁 I still don't know what to do... I guess something for Zander - as the season is on right now 😉
@@SuchaJerkCustomLures can you do a lure with chrome color? That will be very interest to see.
I'm Sorry about my english, i do not know how to write very well.
Nice video 😍😍👏👏👏
Thanks man 😃👋🇵🇱🎣
@@SuchaJerkCustomLures 😁😁👍👋🇪🇸
Nice!!
Thanks mate 🙂
Keren,bisa dicoba
Super filmik.pozdro
Dzieki, sorki, ze przegapilem komentarz. Ciesze sie, ze Ci sie podobra :) pozdro
super bravo
Thanks mate 🤙
Good job
Thank you ☺️
Waw nice, thankyou for tutor
Thank you 🙏 I hope the tutorial was useful and you'll give it a go 👍
Nice asp!
Thanks 😁 it was a nice scrap on the light tackle 😊
Good stuff mate! What type of fish is that?
Nothing like that downunder!
Thanks mate ☺️ the first and the last one is called Asp - kind of poor people tarpon, as we call it 😅 the the second one is European Chub and the third one is called Ide 🙂 all 3 are related to Carp 😉
Asp are a cool looking fish! Do you have trout and pike in Poland??
@@khyeabbott9391 yes, we have both 😁 Pike locally in my City (although I'm not so keen on them - as the other species are more readily available) 👌 and for trout I need to travel few hours... In this season I've only caught one brownie 😟 I've seen you leave closer to the mountains now - waiting for trout minnow build to catch episode 👌😉
Okay fair enough! Yeah a couple of hours away the season just ended this weekend so I'll see what I can make in the next 6 months before opening season 🤔
А клей какой ,когда склеил две половинки? Супер клей?
Да, это был суперклей, рекомендую для постоянного соединения двух половинок, когда провод вставлен 👌 но для временного соединения двусторонний скотч работает лучше, здесь я использую только SG, так как приманка была сделана с минимумом инструментов и продукты, для начинающих 😉
Molto molto catturante...ottimo lavoro!!che prodotto è quello che misceli insieme ai glitter??e perché ci passi sopra una luce uv??grazie mille
Grazie :) il prodotto è smalto per unghie UV, la luce UV è necessaria per curarlo, renderlo duro. Lo uso perché mi ha permesso di finire l'esca in un giorno ed è anche più economico e più facilmente disponibile della resina epossidica in 2 parti, quindi migliore per i principianti ;)
@@SuchaJerkCustomLures grazie ancora....
It's good👍🤓
Thanks mate 😊 today new video will be up - just going 🎣 now with new lure so 🤞
Wow 🤩❤️
What fish are those that you're catching and what river, where are you at?
The first and last is called Asp second one is a European Chub and the third one is called Ide 🙂 I fish in Poland 😉
Where do you get your 'ready made bib' from?
I'm first buying online this sheet of laminate. Than its delivered to my CNC man 😉 and he cuts the bibs according to my template 😁
Very nice. The wire is way overkill for such a small bait unless you are going for Musky ;)
It's only 0.5mm which is rather thin 😉 no way of pulling out muskie on that lure 😱
How do you get the lure to swim side to side like that?
Hi, is the lip of the lure and the weight that I put 😉
What is a name of item that you made a lure lip? ☺️☺️🤗🤗
It is glass fiber and epoxy laminate - it is used to create circuit boards 😉
Hadir kawan ku nyimak video nya salam kenal kawan dari kalbar🛎🛎🛎🛎👍
Terima kasih 🙏 semua yang terbaik dari Polandia
Nice... Where are you from? Europe for sure... Asp and chub
Thank you 🙏 yes, of course is Europ - all the best from Poland 🙂
My need
You may use baking soda instead of basla wood dust.
I know, however since I already had the balsa wood dust, and the aim of the video was to use as few tools and ingredients (as that's what beginner will have available) I didn't want to add one extra. Aside of that I'm not a fan of using super glue + baking soda to fill the lead holes - especially in balsa - is just to hard and after it doesn't sand even. Always use filler putty instead. The only exception is in my Popper build - where I cover the through wire with it for the strength, and only the surface with putty for smooth and even finish ;)
Nice video. Thanks for sharing
Salam strike #VlogMancingCakPandi
Thanks for watching!
nice
Thanks 😊
Красавчик.
Спасибо вам большое :)
@@SuchaJerkCustomLures за что спасибо то? Реально крутые воблера... Вам спасибо за видео...
Hi, where can I buy this wobs?
Unfortunately for now there is no place... I'm not selling my lures... Just not enough time between my day job, family, fishing and making lures on You Tube 😪 please subscribe to the channel if I will start selling them for sure I will mention it in my videos 😉
Толщина заготовок по 5мм?
Хм нормальный я в видео пишу толщину... 🤔 насколько я помню это была пробковая древесина толщиной 2х4мм 😉
@@SuchaJerkCustomLures спасибо
Masz, albo zrobisz jakiś film o woblerach boleniowych?
Tak, kilka sie znajdzie disclaimer: sa to woblery moim zdaniem boleniowe, na ktore skutecznie lowie bolenie.
Nie robie typowych z prostym sterem do ekspresu, bo nie lubie bolkow lowic w taki sposob 😉
th-cam.com/video/1YzbriyQpSc/w-d-xo.html
th-cam.com/video/IWkXqEUZtwM/w-d-xo.html
th-cam.com/video/_M7liNgw-Fg/w-d-xo.html
th-cam.com/video/-plCXprfogU/w-d-xo.html
th-cam.com/video/ofEtBxpmSGM/w-d-xo.html
@@SuchaJerkCustomLures dzięki za odpowiedź, chodziło mi o bezsterowce z bardzo lekką pracą typowe do pracy nurcie, albo takie na stojącą wodę
can i use the cd itself as a lip?😅
Never used one - but feel free to experiment 😁
You can do anything you want to!!! That's how new inventions and method's are found at times.
@@blindabinda1234 but im scared if the lip broke when im fishing 😅, cause you know why i make lures myself 😅
@@fauzipanjihermawan576 you won't ever know if it will work if you never try it.
@@fauzipanjihermawan576 I don't know your budget or if it is available where you live... But the reason for me now exclusively using laminate lips is that they're basically unbreakable !! 🙂
hallo :) nice video
Thanks 😌 do you mean needle fish imitation sinking stick bait??
@@SuchaJerkCustomLures yes, that is exactly what I mean
would be super cool :) pls :)
@@domba8892 the only thing is, thinking about it, I would say it wouldn't have any swimming action 🤔 best you could hope for is flatter on the drop, but while jerking would most likely swim straight (there is no enough surface in the pointy beak to cause water turbulence)
@@SuchaJerkCustomLures ok I understand. you couldn't do the work the dog technique with it ? I just noticed that the bait should catch very well in the sea :)
możesz podać gdzie kupujesz stery?
U Konrada K 😉 z tym, że ja kupuję najpierw laminat szklano-zywiczny, wysyłam do niego i wycina mi według swoich wzorów
@@SuchaJerkCustomLures dzięki też u niego kupuje myślałem ze może gdzie indziej kupujesz
Is it balsa wood?
Yes it is balsa wood - because is soft and sand it well I thought would be good choice for beginner level 😉 I myself started making smaller lures from balsa 🙂
Thanks ❤️❤️
What wire do you use?
Here, since it's a small lure for light tackle 0.5mm stainless steel through wire 😉 as the video shows strong enough 👌 people sometimes are scared of thin wire - but if you'll fish with 7lb leader it's obvious the wire still will be the stronger point 😉
sinking or floating bro?
Floater 😁 runs max 1m down 😉
@@SuchaJerkCustomLures thank youuu..! nice work
super
Dzięki ☺️
Cześć zgrzales to lampa UV?
Tak, żeby był gotowy tego samego dnia używam tutaj lakieru hybrydowego UV plus latarki UV, teraz już mam taką lampę do paznokci i jest bardziej efektywna 😉
@@SuchaJerkCustomLures a zabezpieczone jest czym
@@bercikt1958 same drewno jest zabezpieczone super glue, a potem już warstwy lakieru UV zamiast żywicy
Skąd kupiłeś lakier UV?
@@bercikt1958 ze stoiska z lakierami UV w galerii handlowej 😉
Mi się trafiła jakąś twardsza balsa . Żeby wyrównać krawędzie papierem ściernym muszę popracować
Będzie przynęta trwalsza za to 😊
Hiw much grams does it weight?
Panie Murzynie the lure has 5cm weights 3g with 2 #12 owner treble hooks 😉 it's still a floater 👌
Nice remides me of poc
Thanks 🙂 what is poc ?
does it Łyna river ?
Nope, it's in Wrocław 😉
@@SuchaJerkCustomLures too far frome me :)
Im from Kaliningrad near with Poland . Łyna river come to us through the border. Chub and ASP is my favorite fishing but ASP is ultra rare here . . .he just ignore all my lures (Jackall , ZipBaits and others). But usually if u get bait from ASP it will be big fish : )
@@Lastlightx94 if you into lure making - try to do 7-9cm WTD lure - it's the biggest fun to get Asp on top water 💦💥 they often miss the target but the bites are very visual 😍
@@SuchaJerkCustomLures yes baits are real awesome. ill try do lure tommorow with this guide. My top of topwater lures is DUO poco poco and Jackall Chubby Pencil. Wish u good luck with this chanell. Good Job.
You can also catch it by tying a hook to a tree branch :)
Sure you can - if that would be for survival situation and the main goal is to obtain some fish protein - definitely 😉 If it's your passion, than why not to go that extra mile to have more fun of it 🥰
Not a fisherman are you?
My need please help me
👍🐟👍
🙏😊👍
👍🏾subed ya!
Thanks Bro 🤙
Potrei sapere quanto pesa?
È lungo 5 cm e pesa 4,5 g - quindi lancia molto lontano - progettato per la pesca del tonno mac - ma in acqua dolce è molto buono per aspidi e persici :)
Like👍👍👍🤝🙏
Thank you 👍
Chack brodher
Hook number?
My need bro please help me
Im sorry but a “one day” is solely a Marling Baits thing. If you arent Marling Baits you the gods of lure making forbid you to use the term “one day”
I agree but is so nice challenge to set for yourself as a Luremaker 😉 so from now on mine thing will be "Same Day" build to catch 👍💥
I can catch a carp with a booger not impressed
Thank you for watching 👍 feel free to be not impressed whenever you're feel like 👌
👎
What for ? 🤔
Haters gonna hate...
🌝👍
🙂👋🎣🇵🇱