Great video! If anyone planning on getting a flail mower and thinking about getting an offset, I strongly suggest getting the offset and not settling for a side shift. I regret not getting an offset. Hammers should last years on lighter brush like what is shown in the video. I learned to run two out of the four drive belts on mine because I kept getting 4”-6” diameter sticks stuck in mine. It’ll smoke the belts in a hurry if you’re not hitting the pto quick. We used red loctite 271 and/or Nord Lock wedge-type lock washers and/or steel crimp lock nuts on every fastener on our flail mower, especially the hammers. For the hammer bolts and nuts we completely cover the bolt and nut threads with 271 and use steel crimp lock-nuts. We have around a hundred hours, since we disassembled and reassembled the entire mower, and have not had any bolts come loose but we still check them often. Before we disassembled and reassembled everything we constantly had hardware coming loose.
Thank you! Great points and I second the Loc-Tite!! FUN FACT: I replaced the angle iron guard by the roller with 3/16" angle iron...well, it worked loose with all of my abuse, and the mower twisted it up like a pretzel but did NOT damage the mower at all! I'm telling you, I have beat the hell out of this thing and will absolutely buy another when and if I ever do finally destroy this thing!
Nice to hear someone not bitching on the quipment when used it on something that it shouldnt really handle. Thumb up 👍. Doing my own research before buying, great video.
Thank you. I'm the kind of guy that researches a toaster for 4 hrs before I pick one. This was the absolute best bang for your buck and I'm still loving this thing! If/when it does finally go I'll buy another without hesitation. If you do decide on a Nova-Tractor product be sure to mention the channel "RedneckTech" at checkout and they'll send you some free spare parts.
I have those same shrubs/weeds or whatever they are on some properties I've recently inherited that were neglected for many years.... I don't know what their name is, but they are tough as steel cable I swear! And like you discovered they have a really thick section that's just a foot or so tall at the base that might as well be concrete... I've been using a 78" Titan DB200 Ditch/Bank flail mower and a 65 HP John Deere tractor and it's brutal work chopping those things up! I am amazed you still had all the front guard plates on your Nova flail mower, I've lost close to a dozen of the front guard plates off my Titan they get knocked off far too easily. Still, these flail mowers are The Bomb.... the things they can handle mulching up never fail to amaze me, and the cut quality of hammer blades can't be beat!
As much as I watch other channels that review equipment and they are great but I get way more information from videos like this pushing equipment to the edge or past its limits I hope more manufacturers realise how effective this type of content is any flail can cut grass how many can be abused and survive that's what I like to see
Thank you and agreed! I want to get their chipper shredder next. They say it can handle 4" branches. I'm sure twigs won't stand a chance...but can it REALLY handle 4"!?
@@rednecktech82 I got a knockoff china pto chipper for odd chipping and it's 4" it can definitely handle more depending on the type of wood really struggles with iron bark here in Australia but fresh cut non hardwoods it will chew threw over 5" easy.if you plan on using it more than 1 and done get the auto feeding I didn't and dry hardwoods definitely suck to force feed or they tend to when they get short bounce around get sidewards and pop a shear bolt.
I live in hardwood's country (Northeast Pa, USA) but realistically I would never chip anything 4" large, I would cut that up and burn it but just to test the machine I would run 4" through it to do a review and post a vid...if and when I can afford one lol. (About $2400 right now.)
Spec'ed out Nova Tractor's chipper shredder is the best deal and I would get the independent one versus PTO just because I think it would apply to more people and my main focus would be to do a review video of it, but then I would also obviously use it around my own property. Another plus is an independent machine would be more maneuverable since I could take it Into the woods on an ATV versus having to try and fit my large tractor into tight places.
Nice, I'm selling my old fixed offset 68'' flailmower from palletforks, excellent mower but they simply don't make it easy to get tear and wear parts. So I'm pretty set on getting this ditch flail mower as an upgrade. Thanks for the review, it helped me settle on this.
*UPDATE* After several hours of cutting a hayfield the teeth were all good, not loose at all. SO, use it as an actual flail mower and not a forestry mulcher and nothing should vibrate apart on you. 😏
Maybe you should do a limbing video with the flail, that should save so time. The flail I used to mow with had the medium weight knives (hammers) on it yours are the heaver type ,not the heaviest I've seen but cast anyway, so it's no wonder why it cut all of that down. The hangers on that are different that's probably why they got loose, I think you'll be able to just sharpen those after they're pretty tough and they bounce off of stuff so they keep going. They're kind of meant to ""break" the grass anyway and work even when rounded off but to each their own. That will be great for ditch lines and around ponds for sure with the off set. Does the still run (cut) when you tilt it?
Thanks for this review! I've been looking all over the market. It's obvious that no one makes them here in the US, so we all get to choose our poison. No one has pushed one of these the way you have, and few companies near this price point get good reviews. Your video has helped me make up my mind, and I will be calling Nova soon. It appears they are sold out of the size I want, but maybe they will have some in this spring. Again, thanks.
@@rednecktech82 What free parts are they including? I bought their heavy-duty unit. Like you I used it hard, or harder than you. It really didn't hold up as well as it should have. As you can see in my post from 3 months ago. 6 months after I got this one, they come out with a severe duty mower. Go figure. I bought this one to try to save some money. Courese if I had known they were putting out a severe duty, I would have waited for that one. I use mine commercially. So, it doesn't get beat, but it doesn't get babied either. It does get worked hard. Maybe in the next couple of years I'd really like to demo and review that Severe Duty mower.
@@rednecktech82. Must be something new? They didn't have it when I got mine. I got mine the year prior to covid. I need to order some new parts for it this year. I'll definitely check with them. Thank you so much for the info. I'll definitely give 'em your name.
I have wanted a ditch mower for a while. Pricey though. Then I saw your video and if it can take that kind of abuse for that cheap of a price, well it will be here soon. I have the side shift mfz195 and it's been a great mower but it cant do ditches. I found Y knives to fit it and I have cut grass 6 feet high and didn't even work it hard. Thanks for video!
Once I finish destroying it clearing this property I'll be buying another! I love it, the next one would just be doing grass at that point so it should last forever! 🙂
bought an old mott mower at an auction 180 bucks was belt drive switch to chain drive made sure the 3/8 shear bolt would shear changed the swing lite blades to long t blades home made the mower runs behind a 100hp tractor you will find it is easier to mow up a couple inch of soil as the ground becomes the place where everything is trashed
Thanks for the video I've been looking at buying a flail mower. I havea question, in 4 to 6 foot of mixed fields what is average rate of speed and still get a good cut ?
@@shadog1962 too many factors, I mow up and down a big hill so even my turbo diesel tractor bogs down. Depends on the tractors power, the terrain as I mentioned, how tall or thick or wet is the material etc. Flat land with dry grass even 2' tall I say the listed specs on Nova-Tractors website would be accurate.
Funny . I bought the larger, Heavy duty version of this machine. Biggest difference is mine hsa the 5.5 lbs. hammers. Course I probably should have done what you did. a video and review. Unfortunately. I just don't have that kind of time . However. I figured it was time for a new flail mower and thought I could save some money with Nova Tractors Heavy Duty mower. Weelll, that didn't work out like I'd hoped. The very first job i did with it, worked great. However, the 2nd. job not so much. There are 4 belts which drive the flails, (mower drum). After about 2 hours into the project the 3rd. belt in, not the 1st, 2nd., or 4th. or even 2 or maybe 3 of them, Broke. The next thing that happened on the same job. Same day. The, supposed to be saft shields in the front of the machine, that's supposed to keep stuff from coming at you, 6 of them vanished. have no idea when or where they went, but they disappeared faster than getting someone to actually work these days. For supposing to be heavy duty they seem to bend real easy. The knock down bar on the front, yeah, Ya might want to change that out with a real pipe that don't bend so easy. The one on the back is great. Course it really doesn't do anything, Kinda like kids these days. Now the scrapper bar, The angle iron on the rear roller, It keeps the mud and stuff from building up on the roller. Yup. Change that out too. Because the fist time you back into some brush that you need to mow down, will bend on you faster than a career politician . Now the next thing that happened, I could blame it on the machine, but I'd be lying. Dam it. Should have learned how to lie better. lol.. I actually had one of those cast 5.5lbs. metal hammers break right in two. Ya I kinda may have hit a 4in. diameter oak stump that was hidden in the tall grass and brush. The gentleman failed to mention he cut down a few small trees. All the other ones he cut down short enough that with the machine set to it's highest setting would go right over them. So of course when that happened, yah, you guessed it. I twisted the pto drive shaft. I still think it might have been the machines fault. (Just Kidding Nova). Gotta eat that one. But anyway. I did contact Nova Tractor and expressed my concerns. I let them know what happened and even told them the things I broke. There's that dam honesty thing again. But I never heard back from them. But I noticed that when the video and review you did they were happy to leave you a nice comment. Which is awesome. That's the one thing I didn't do. Guess I need figure out how to make a living doing video's and reviews. Gotta be easier work. Course if they sent stuff to me to see if it passes the Rick test would be awesome. Couse I can't afford to buy things just to see if I can break it. lol... Anyway. I've had to repair a lot of things on this machine that should not have had to fix. The gearbox is great, the balance of the roller and the mower drum is great. At the time I ordered mine, it was the biggest they offered. They now have the "Severe Duty " mower I wanted. All and all it's really an okay machine. As long as you don't plan on working it to hard. I'm also surprised they don't offer "Y" Blades for the heavy duty Mowers. That would be nice when you're mowing a hay field. The hammers work but you have to sharpen them. That takes time because you need to make sure they are balanced. Me. I'd swape them out. Then I could mow fast. to some. 4 years ago, you couldn't get one from Nova Tractor. I do a lot of roadside mowing for the state so I needed a machine that could do the task. This one is "NOT". I should have just waited for "The Red One" to get back in stock. They're a great machine that has lasted me for many years. Out of respect for Nova Tractor, I'll keep the name out of this review of my experience with their Ditch and Bank Mower because I think they're really a good company. Maybe after they've had their "Severe Duty" Ditch and Bank Flail Mower a while. Maybe in about another year or so, Depends on how long it takes me to save my pennies, possibly buying That one and see if I can break that one. I'd bet they made some good changes. That's why it say's "Severe Duty". Lol... Anyway. Just make sure you don't work it hard like I do. It won't hold up. I do Think Nova Tractor has a reasonable Price for their machines. So That being said, maybe when I get ready to replace this one I might like to try thir "Severe Duty" Ditch and Bank Flai Mower.
@@Ranchready496 I take it you don't like books? I'm sure some folks do. After all. This is a real, honest revie. This is a "Heavy Duty" machine. Just wanted to make sure folks knew EVERYTHING that's wrong with this thing. That way, people know what they're getting. 😎👍
If it won't do that type of brush it would be worthless to me becasue would be its primary purpose. That's the one thing it should be great at. I don't need it to cut grass as much as they would like to push it for that purpose.
I guess I'm stupid, but I'm not seeing how you put a stick through the hood, unless you threw something up from underneath. That is a bit of a concern for me as the slash is thrown forward, so I need to worry about what may be in the way of it (like the fuel tank on my Branson). I had not looked at this brand, but will investigate further as it does look pretty rugged. I guess your viewpoint of trashing a piece of equipment that costs less than what renting a proper mulcher for a day has merit. Thanks for posting.
They have lock nuts on them. I think it was just me beating it with that thick brush it was not intended to be used on. When mowing my fields they didn't work loose.
@@stephenjones8735 since four months ago I bought a flail mower. It can sideshift hydraulically but isn’t as manoeuvrable as the one in this vid. It should be all I need to mow grass between trees in my orchard. I have not used it yet. Hopefully it works.
yeah, but you mentioned looking at a rental so I gave a suggestion for the future, dealers normally rent equipment cheaper than the rental places. How has this held up over the last year? I'm looking at a flail mower for the culverts and pond.@@rednecktech82
Common sense says not to ram the equipment into thick brush. cut it down if it takes few pass my guess is it more designed to pull thru brush then to back right over.
$15/each...and I have yet to need to replace any..and I have truly BEAT this thing! They have a whole list of spare parts you can purchase on their website.
Over the course of a couple clearings, a lot more than this machine cost! And keep in mind I didn't buy this just to clear this lot one time. It's also going to be used for years to come to mow these fields. Point is it's an excellent machine that is capable of so much more than it was designed to be.
Too bad they used round iron for the protective bar in the back instead of an I-beam other than that very fine piece of equipment that could clearly without much work or expense be dramatically improved and upgraded.
That guard isn't even needed, it's only there due to UK requirements I was told. Under "normal" operating conditions it would have been fine. I was shoving over what were basically 4"+ Trees with it! This thing needs no upgrading. I truly beat the hell out of this thing, it's worth every penny as is. FYI, I paid full price for this thing, this is MY honest opinion on this.
I should also point out, though the guard isn't really even needed as my other comment stated, I am glad it's there...if it wasn't for that then brush etc would be scratching and knicking up the actual flail mower body...so this is a little extra protection to keep what counts pretty :)
Video quality sux, and you go on and on about the same think without saying anything of real use. You talk over the noise of the mower, and that noise makes hearing what you're saying impossible to discern Negative 5
@@ColeSanders-m5r it's metric so similar to SAE J429 grade 8 but is actually grade 10.9 on the metric scale. The internet is there, educate yourself before you pat yourself on the back for attempting to make someone look stupid.
@@rednecktech82 calm down buddy wasn’t trying to make anyone sound stupid lol the tensile strength to both of them is so close they’re basically the same thing
Great video!
If anyone planning on getting a flail mower and thinking about getting an offset, I strongly suggest getting the offset and not settling for a side shift. I regret not getting an offset.
Hammers should last years on lighter brush like what is shown in the video. I learned to run two out of the four drive belts on mine because I kept getting 4”-6” diameter sticks stuck in mine. It’ll smoke the belts in a hurry if you’re not hitting the pto quick.
We used red loctite 271 and/or Nord Lock wedge-type lock washers and/or steel crimp lock nuts on every fastener on our flail mower, especially the hammers. For the hammer bolts and nuts we completely cover the bolt and nut threads with 271 and use steel crimp lock-nuts. We have around a hundred hours, since we disassembled and reassembled the entire mower, and have not had any bolts come loose but we still check them often. Before we disassembled and reassembled everything we constantly had hardware coming loose.
Thank you! Great points and I second the Loc-Tite!!
FUN FACT: I replaced the angle iron guard by the roller with 3/16" angle iron...well, it worked loose with all of my abuse, and the mower twisted it up like a pretzel but did NOT damage the mower at all! I'm telling you, I have beat the hell out of this thing and will absolutely buy another when and if I ever do finally destroy this thing!
Your the best.... I brought BCRM175 a few months ago and yes it is all that you say and more. Also thanks Jack...
I want the bigger model now for strictly brush clearing!
Nice to hear someone not bitching on the quipment when used it on something that it shouldnt really handle. Thumb up 👍.
Doing my own research before buying, great video.
Thank you. I'm the kind of guy that researches a toaster for 4 hrs before I pick one. This was the absolute best bang for your buck and I'm still loving this thing! If/when it does finally go I'll buy another without hesitation. If you do decide on a Nova-Tractor product be sure to mention the channel "RedneckTech" at checkout and they'll send you some free spare parts.
I have those same shrubs/weeds or whatever they are on some properties I've recently inherited that were neglected for many years.... I don't know what their name is, but they are tough as steel cable I swear! And like you discovered they have a really thick section that's just a foot or so tall at the base that might as well be concrete... I've been using a 78" Titan DB200 Ditch/Bank flail mower and a 65 HP John Deere tractor and it's brutal work chopping those things up! I am amazed you still had all the front guard plates on your Nova flail mower, I've lost close to a dozen of the front guard plates off my Titan they get knocked off far too easily. Still, these flail mowers are The Bomb.... the things they can handle mulching up never fail to amaze me, and the cut quality of hammer blades can't be beat!
As much as I watch other channels that review equipment and they are great but I get way more information from videos like this pushing equipment to the edge or past its limits I hope more manufacturers realise how effective this type of content is any flail can cut grass how many can be abused and survive that's what I like to see
Thank you and agreed! I want to get their chipper shredder next. They say it can handle 4" branches. I'm sure twigs won't stand a chance...but can it REALLY handle 4"!?
@@rednecktech82 I got a knockoff china pto chipper for odd chipping and it's 4" it can definitely handle more depending on the type of wood really struggles with iron bark here in Australia but fresh cut non hardwoods it will chew threw over 5" easy.if you plan on using it more than 1 and done get the auto feeding I didn't and dry hardwoods definitely suck to force feed or they tend to when they get short bounce around get sidewards and pop a shear bolt.
I live in hardwood's country (Northeast Pa, USA) but realistically I would never chip anything 4" large, I would cut that up and burn it but just to test the machine I would run 4" through it to do a review and post a vid...if and when I can afford one lol. (About $2400 right now.)
Spec'ed out Nova Tractor's chipper shredder is the best deal and I would get the independent one versus PTO just because I think it would apply to more people and my main focus would be to do a review video of it, but then I would also obviously use it around my own property. Another plus is an independent machine would be more maneuverable since I could take it Into the woods on an ATV versus having to try and fit my large tractor into tight places.
@@rednecktech82 If not you can just run it over a few times with your flail mower!
Nice, I'm selling my old fixed offset 68'' flailmower from palletforks, excellent mower but they simply don't make it easy to get tear and wear parts. So I'm pretty set on getting this ditch flail mower as an upgrade. Thanks for the review, it helped me settle on this.
*UPDATE* After several hours of cutting a hayfield the teeth were all good, not loose at all. SO, use it as an actual flail mower and not a forestry mulcher and nothing should vibrate apart on you. 😏
Awesome ordered one and do you have a video of how to assemble it ?
@@anthonykontos7931 I continue to beat the hell out of this thing as I use it Not for its intended purpose lol... and just love it more every day!
Maybe you should do a limbing video with the flail, that should save so time. The flail I used to mow with had the medium weight knives (hammers) on it yours are the heaver type ,not the heaviest I've seen but cast anyway, so it's no wonder why it cut all of that down. The hangers on that are different that's probably why they got loose, I think you'll be able to just sharpen those after they're pretty tough and they bounce off of stuff so they keep going. They're kind of meant to ""break" the grass anyway and work even when rounded off but to each their own. That will be great for ditch lines and around ponds for sure with the off set. Does the still run (cut) when you tilt it?
Thanks for this review! I've been looking all over the market. It's obvious that no one makes them here in the US, so we all get to choose our poison. No one has pushed one of these the way you have, and few companies near this price point get good reviews. Your video has helped me make up my mind, and I will be calling Nova soon. It appears they are sold out of the size I want, but maybe they will have some in this spring. Again, thanks.
Thank you! Be sure to mention "Redneck Tech" when you place your order to receive some free parts!
@@rednecktech82 What free parts are they including? I bought their heavy-duty unit. Like you I used it hard, or harder than you. It really didn't hold up as well as it should have. As you can see in my post from 3 months ago. 6 months after I got this one, they come out with a severe duty mower. Go figure. I bought this one to try to save some money. Courese if I had known they were putting out a severe duty, I would have waited for that one. I use mine commercially. So, it doesn't get beat, but it doesn't get babied either. It does get worked hard. Maybe in the next couple of years I'd really like to demo and review that Severe Duty mower.
Tou'd have to contact Nova-Tractor but I believe they send $100 worth of parts to include spare counter knives and hammers/cutting teeth.
@@rednecktech82. Must be something new? They didn't have it when I got mine. I got mine the year prior to covid. I need to order some new parts for it this year. I'll definitely check with them. Thank you so much for the info. I'll definitely give 'em your name.
The free parts is only when you order a new unit and mention this channel.
By far the best video I've seen showing what CAN be done with these. Helped with my decision. Thanks!! Subscribed
Thank you! Be sure to mention "Redneck Tech" on your order to receive some free parts!
I bought the mfz 175 and love. What redneck tech has said is true
I have wanted a ditch mower for a while. Pricey though. Then I saw your video and if it can take that kind of abuse for that cheap of a price, well it will be here soon. I have the side shift mfz195 and it's been a great mower but it cant do ditches. I found Y knives to fit it and I have cut grass 6 feet high and didn't even work it hard. Thanks for video!
Once I finish destroying it clearing this property I'll be buying another! I love it, the next one would just be doing grass at that point so it should last forever! 🙂
@@rednecktech82 Mine will be here Wednesday!😀
I Got the same mower and use it just like you demonstrated
👍👍
bought an old mott mower at an auction 180 bucks was belt drive switch to chain drive made sure the 3/8 shear bolt would shear changed the swing lite blades to long t blades home made the mower runs behind a 100hp tractor you will find it is easier to mow up a couple inch of soil as the ground becomes the place where everything is trashed
Thanks for the video I've been looking at buying a flail mower.
I havea question, in 4 to 6 foot of mixed fields what is average rate of speed and still get a good cut ?
@@shadog1962 too many factors, I mow up and down a big hill so even my turbo diesel tractor bogs down. Depends on the tractors power, the terrain as I mentioned, how tall or thick or wet is the material etc. Flat land with dry grass even 2' tall I say the listed specs on Nova-Tractors website would be accurate.
I have a flail mower and brush hog. Hand down the brush hog does much better on large brush and is cheaper.
Funny . I bought the larger, Heavy duty version of this machine. Biggest difference is mine hsa the 5.5 lbs. hammers.
Course I probably should have done what you did. a video and review. Unfortunately. I just don't have that kind of time .
However. I figured it was time for a new flail mower and thought I could save some money with Nova Tractors Heavy Duty mower.
Weelll, that didn't work out like I'd hoped. The very first job i did with it, worked great. However, the 2nd. job not so much. There are 4 belts which drive the flails, (mower drum). After about 2 hours into the project the 3rd. belt in, not the 1st, 2nd., or 4th. or even 2 or maybe 3 of them, Broke. The next thing that happened on the same job. Same day. The, supposed to be saft shields in the front of the machine, that's supposed to keep stuff from coming at you, 6 of them vanished. have no idea when or where they went, but they disappeared faster than getting someone to actually work these days. For supposing to be heavy duty they seem to bend real easy. The knock down bar on the front, yeah, Ya might want to change that out with a real pipe that don't bend so easy. The one on the back is great. Course it really doesn't do anything, Kinda like kids these days. Now the scrapper bar, The angle iron on the rear roller, It keeps the mud and stuff from building up on the roller. Yup. Change that out too. Because the fist time you back into some brush that you need to mow down, will bend on you faster than a career politician . Now the next thing that happened, I could blame it on the machine, but I'd be lying. Dam it. Should have learned how to lie better. lol.. I actually had one of those cast 5.5lbs. metal hammers break right in two. Ya I kinda may have hit a 4in. diameter oak stump that was hidden in the tall grass and brush. The gentleman failed to mention he cut down a few small trees. All the other ones he cut down short enough that with the machine set to it's highest setting would go right over them. So of course when that happened, yah, you guessed it. I twisted the pto drive shaft. I still think it might have been the machines fault. (Just Kidding Nova). Gotta eat that one.
But anyway. I did contact Nova Tractor and expressed my concerns. I let them know what happened and even told them the things I broke.
There's that dam honesty thing again. But I never heard back from them. But I noticed that when the video and review you did they were happy to leave you a nice comment. Which is awesome. That's the one thing I didn't do. Guess I need figure out how to make a living doing video's and reviews. Gotta be easier work. Course if they sent stuff to me to see if it passes the Rick test would be awesome. Couse I can't afford to buy things just to see if I can break it. lol... Anyway. I've had to repair a lot of things on this machine that should not have had to fix. The gearbox is great, the balance of the roller and the mower drum is great. At the time I ordered mine, it was the biggest they offered. They now have the "Severe Duty " mower I wanted. All and all it's really an okay machine. As long as you don't plan on working it to hard. I'm also surprised they don't offer "Y" Blades for the heavy duty Mowers. That would be nice when you're mowing a hay field. The hammers work but you have to sharpen them. That takes time because you need to make sure they are balanced. Me. I'd swape them out. Then I could mow fast. to some. 4 years ago, you couldn't get one from Nova Tractor. I do a lot of roadside mowing for the state so I needed a machine that could do the task. This one is "NOT". I should have just waited for "The Red One" to get back in stock. They're a great machine that has lasted me for many years. Out of respect for Nova Tractor, I'll keep the name out of this review of my experience with their Ditch and Bank Mower because I think they're really a good company. Maybe after they've had their "Severe Duty" Ditch and Bank Flail Mower a while. Maybe in about another year or so, Depends on how long it takes me to save my pennies,
possibly buying That one and see if I can break that one. I'd bet they made some good changes. That's why it say's "Severe Duty". Lol...
Anyway. Just make sure you don't work it hard like I do. It won't hold up. I do Think Nova Tractor has a reasonable Price for their machines.
So That being said, maybe when I get ready to replace this one I might like to try thir "Severe Duty" Ditch and Bank Flai Mower.
Damn! A freaking book😧🫳🍿
@@Ranchready496 I take it you don't like books? I'm sure some folks do. After all. This is a real, honest revie. This is a "Heavy Duty" machine. Just wanted to make sure folks knew EVERYTHING that's wrong with this thing. That way, people know what they're getting. 😎👍
If it won't do that type of brush it would be worthless to me becasue would be its primary purpose. That's the one thing it should be great at. I don't need it to cut grass as much as they would like to push it for that purpose.
I guess I'm stupid, but I'm not seeing how you put a stick through the hood, unless you threw something up from underneath. That is a bit of a concern for me as the slash is thrown forward, so I need to worry about what may be in the way of it (like the fuel tank on my Branson).
I had not looked at this brand, but will investigate further as it does look pretty rugged.
I guess your viewpoint of trashing a piece of equipment that costs less than what renting a proper mulcher for a day has merit.
Thanks for posting.
That wasn't from the flail mower, the hood was from plowing through the trees/brush.
Would lock washers or Loctite work to keep the nuts from backing off?
They have lock nuts on them. I think it was just me beating it with that thick brush it was not intended to be used on. When mowing my fields they didn't work loose.
from whom didi you buy the nova unit from? I have a kabota 2380 tractor , 21 horse power, would it be big enough to run the nova unit
@@kimberleyoliver8160 in vid description.
What size Kubota is that I have a 3901 , will it work ? Awesome video , straight to the point. No cat and dog nonsense lol
3901 should be fine. I have a MX5200
Nothing like a flail for giving your land a close shave
I have the tractor, a Kubota MX5200 with two rear remotes. I need the mower. Not for clearing bush but to cut grass. Grass that is six feet tall.
the six foot grass will be way tougher than what you watched in the video better with round up and fire
I found Y knives at I think WoodMax and cut 6 foot grass with ease with my mfz195 flail mower. I had to get spacers made but it work amazing.
@@stephenjones8735 since four months ago I bought a flail mower. It can sideshift hydraulically but isn’t as manoeuvrable as the one in this vid. It should be all I need to mow grass between trees in my orchard. I have not used it yet. Hopefully it works.
Incredible review, great job!!!!!
Thank you!
look at local dealers for rentals, the rentalmax wanted $1600 for a forestry mulcher and skid steer per day, Cat dealer wanted $800.
And i bought and OWN this for about $3,000...less than 2 days rental.
yeah, but you mentioned looking at a rental so I gave a suggestion for the future, dealers normally rent equipment cheaper than the rental places. How has this held up over the last year? I'm looking at a flail mower for the culverts and pond.@@rednecktech82
Common sense says not to ram the equipment into thick brush. cut it down if it takes few pass my guess is it more designed to pull thru brush then to back right over.
You obviously don't own fields and haven't dealt with the stuff before lol
How much do the teeth cost (hammers)
$15/each...and I have yet to need to replace any..and I have truly BEAT this thing! They have a whole list of spare parts you can purchase on their website.
Not bad 😧👍
My god. Just buy Compact Track Loaders299D3
forester. . I mean much would a contract charger to clear your lot?
Over the course of a couple clearings, a lot more than this machine cost! And keep in mind I didn't buy this just to clear this lot one time. It's also going to be used for years to come to mow these fields. Point is it's an excellent machine that is capable of so much more than it was designed to be.
Awesome video
Thank you
Can you use a quick hitch with this?
No, I don't think there is any flail mower that can be used with a quick hitch.
Great video!!
What size tractor is this???
Kubota MX5200 (52 net HP)
Too bad they used round iron for the protective bar in the back instead of an I-beam other than that very fine piece of equipment that could clearly without much work or expense be dramatically improved and upgraded.
That guard isn't even needed, it's only there due to UK requirements I was told. Under "normal" operating conditions it would have been fine. I was shoving over what were basically 4"+ Trees with it! This thing needs no upgrading. I truly beat the hell out of this thing, it's worth every penny as is. FYI, I paid full price for this thing, this is MY honest opinion on this.
I should also point out, though the guard isn't really even needed as my other comment stated, I am glad it's there...if it wasn't for that then brush etc would be scratching and knicking up the actual flail mower body...so this is a little extra protection to keep what counts pretty :)
Are you using the hammer blades?
Yes
What HP is your tractor?
52 Net (Kubota MX5200)
Quick Hitch compatible?
By design I don't believe any flail mower is, they're too big and heavy. Their own frame (yellow section) supports them. Easy hookup still though.
so satisfying video 🤣😁😎👍
"Taking it to the limit"
Got er done 👏👍💪🏆🏆👴🐕🚜🦌😎🤠🙏🙏
It helps to know how to use the equipment before you use it.
I feel pain!
MRP
Video quality sux, and you go on and on about the same think without saying anything of real use. You talk over the noise of the mower, and that noise makes hearing what you're saying impossible to discern
Negative 5
10.9 is grade 8 lol
@@ColeSanders-m5r it's metric so similar to SAE J429 grade 8 but is actually grade 10.9 on the metric scale. The internet is there, educate yourself before you pat yourself on the back for attempting to make someone look stupid.
@@rednecktech82 calm down buddy wasn’t trying to make anyone sound stupid lol the tensile strength to both of them is so close they’re basically the same thing