hey buddy ! hope all is well. So i did a couple of test. So when the maf was connected, it was getting readings that didnt check out. And when i disconnected it, it all had the right voltage, But in the grounds were reading 0.03
Question my 1st wire is 8.3v instead of 5v. 2nd wires is 12v. 3rd is gnd 4th is 8v instead of 3.5v . 5th is gnd. Why do I have 8v instead of 5v and 3.5v
hey buddy ! hope all is well. So i did a couple of test. So when the maf was connected, it was getting readings that didnt check out. And when i disconnected it, it all had the right voltage, But in the grounds were reading 0.03
What brand and model is your tester?
Thanks for the video. I’m having Dane issue on same vehicle
Power probe but you can buy on amazon autel kit its about 80 awesome tester power probe its ok ..
Question my 1st wire is 8.3v instead of 5v. 2nd wires is 12v. 3rd is gnd 4th is 8v instead of 3.5v . 5th is gnd. Why do I have 8v instead of 5v and 3.5v
I have a 2000 chevy silverado an the tan wire checks in at 1.9 volts unplug it an it's 4.8 to 4.9 ???
That should be right its a 5.0v reference
But I'm getting a code p0102 an put a new maf in
I have 2005 yukon first wire is 8.3v instead of 5v. 4th wire is also 8v instead of 3.5v. 2nd wire is 12v 3rd and 5th are ground
Hi im having the same issue but I’m not getting no reading on the black and white wire
You got to trace it..
I did but all the wire seem to be ok I think I may have a bad pcm