Thanks for sharing this film,this brings back many memories of chasing 4070 up and down Riverview Rd. and through out the valley. It would great to see 4070 running in the valley again.
So much good in this video!!! Hard to believe 44 years ago. I watched 4070 on Horseshoe, (broke down,but fixed) and the stub into Conneaut Lake, and a trip from Erie to around Osgood.
I fired on the trip the weekend before the eccentric rod came 'undone'. The whole fiasco was due to a simple cotter pin that had worn thin and broke off. The castellated nut holding the eccentric rod to the crank loosened and the pin fell out. I spent just about every weekend at Conneaut Lake in 1971-72. Only a mile out & back but it was better than a static display. All the time running on the same LH curve at Lynce's Junction caused a lot of wear on the right-front driver flange.
Really glad you found this! I believe the first shot is at Tower R near Harshaw Chemical. 1:45 might be Portage Path + Merriman, it's changed a lot. 2:37 - Turning at the elevated coal dock in Akron. Coal dock is still there, visible on streetview from Eastwood Ave, but the small engine house is gone. I don't remember the name of the elevated tower that used to be there. You can see the remains of the track + wye they used by the engine house area, west of Eastwood. Close to the coal dock at 4:20, and a WW-II troop car at 4:49. Still watching...
Hello, Thanks. First shot is under the Grainger Road bridge. The old boarding area was near the Value City Furniture store near there. Yes, N. Portage Path was a busy crossing. A pretty good grade began here up to Botzum and into Akron Junction. Fun Times!
@@SteamCrane Are you thinking of the Clark Avenue yard office? As far as I know the next train order station west (north) of RD was Bridge 460. I'd have to ask my bro-in-law who worked there. [edit] Oh, sorry. You're thinking of the one at Akron Junction. I was thinking of the old wood coal dock at W. 3rd. St. The Akron Junction three-story building wasn't really a tower. It housed the chief clerk's office, terminal trainmaster and a crew locker room and it burned down in October, 2013. AY tower was just east of Arlington St. and was maintained by the PRR. Maybe the AY had something to do with Arlington Street or maybe Arlington Yard if there was ever such a thing?
I never knew 4070 was used on the Cuyahoga Valley!! I knew it was being restored at the Cleveland Roundhouse, but I never knew it ran the Cuyahoga!! Thank you for posting this!
Wonderful capturing of a time lost...Not only do I love the things which roll on it, but I love track-age as much; the way it tells a story, the path it takes through switches, diamonds, wyes, sidings, complex industrial areas with tight curves, then wide graceful curves along rivers, how frail it can look from way above, then become sometimes 9 inches high up close, the too quickly disappearing smell of the Creosote in wooden ties being replaced with concrete ties..Yeah, I love track a lot.. And how dignified that Mikado looks chugging along with its train atop its pathway, millions and millions of miles of T shaped steel..and the very first couplers behind the tender; imagining how strong they must have to be and how the last two have it the easiest !! What an amazing invention, the railroad..I've always loved it all and yet I can't better tell you why.. Thank you for posting this...It's a true treasure.. M. Harris Los Angeles
Wow! I hope my legacy lives half as long. Geesh. That is REALLY - REALLY COOL on that 80s video. It has that "classic" movie style to it - and in Full Technicolor.. or Kodak, or some shit. Thanks for sharing this treasure - #RailfannersRock
There were some B&O special trains operated in the 1950s and '60s in the Valley. Sometimes special trains were operated Cleveland to Akron then on to Chardon on the Lake Branch to the Maple Festival. The 4070 did not begin operations until 1975. Thanks.
Thank You! A while back I used the default TH-cam image stabilization and it looked awful. Like I was watching through a Lava Lamp! Now that you suggested it I found that the Premiere Elements I use to edit has much better control. I'll use it on my upcoming 4070 video and when time permits replace this one with an image stabilized video.
Thanks for sharing this film,this brings back many memories of chasing 4070 up and down Riverview Rd. and through out the valley. It would great to see 4070 running in the valley again.
Glad you enjoyed the film! Thanks...
So much good in this video!!!
Hard to believe 44 years ago.
I watched 4070 on Horseshoe, (broke down,but fixed) and the stub into Conneaut Lake, and a trip from Erie to around Osgood.
I fired on the trip the weekend before the eccentric rod came 'undone'. The whole fiasco was due to a simple cotter pin that had worn thin and broke off. The castellated nut holding the eccentric rod to the crank loosened and the pin fell out. I spent just about every weekend at Conneaut Lake in 1971-72. Only a mile out & back but it was better than a static display. All the time running on the same LH curve at Lynce's Junction caused a lot of wear on the right-front driver flange.
Really glad you found this!
I believe the first shot is at Tower R near Harshaw Chemical.
1:45 might be Portage Path + Merriman, it's changed a lot.
2:37 - Turning at the elevated coal dock in Akron. Coal dock is still there, visible on streetview from Eastwood Ave, but the small engine house is gone. I don't remember the name of the elevated tower that used to be there. You can see the remains of the track + wye they used by the engine house area, west of Eastwood. Close to the coal dock at 4:20, and a WW-II troop car at 4:49.
Still watching...
Hello, Thanks. First shot is under the Grainger Road bridge. The old boarding area was near the Value City Furniture store near there. Yes, N. Portage Path was a busy crossing. A pretty good grade began here up to Botzum and into Akron Junction.
Fun Times!
21:31 - Akron coal dock again.
22:36 - Tower R if I recall the name, near Harshaw Chemical.
@@SteamCrane Yes, RD Tower where the CL&W branches off and the W&LE cross. Harvard Road near Jennings.
Thanks.
@@gmpullman Thanks, I couldn't remember the tower name. What was the 2 level tower just west of the coal dock?
@@SteamCrane Are you thinking of the Clark Avenue yard office? As far as I know the next train order station west (north) of RD was Bridge 460. I'd have to ask my bro-in-law who worked there.
[edit] Oh, sorry. You're thinking of the one at Akron Junction. I was thinking of the old wood coal dock at W. 3rd. St.
The Akron Junction three-story building wasn't really a tower. It housed the chief clerk's office, terminal trainmaster and a crew locker room and it burned down in October, 2013. AY tower was just east of Arlington St. and was maintained by the PRR. Maybe the AY had something to do with Arlington Street or maybe Arlington Yard if there was ever such a thing?
I never knew 4070 was used on the Cuyahoga Valley!! I knew it was being restored at the Cleveland Roundhouse, but I never knew it ran the Cuyahoga!! Thank you for posting this!
See my recent upload of the 4070 running in 1975, the first year in the 'Valley'. Thanks!
@gmpullman I will!
Wonderful capturing of a time lost...Not only do I love the things which roll on it, but I love track-age as much; the way it tells a story, the path it takes through switches, diamonds, wyes, sidings, complex industrial areas with tight curves, then wide graceful curves along rivers, how frail it can look from way above, then become sometimes 9 inches high up close, the too quickly disappearing smell of the Creosote in wooden ties being replaced with concrete ties..Yeah, I love track a lot.. And how dignified that Mikado looks chugging along with its train atop its pathway, millions and millions of miles of T shaped steel..and the very first couplers behind the tender; imagining how strong they must have to be and how the last two have it the easiest !! What an amazing invention, the railroad..I've always loved it all and yet I can't better tell you why..
Thank you for posting this...It's a true treasure..
M. Harris
Los Angeles
Thank you for commenting. Much appreciated!
Spent MANY Saturday mornings Spring through Fall chasing 4070 with my Dad. It's amazing how I can identify those locations some 44 years later!
Thanks for sharing your memories. Appreciate it!
Great video indeed! I love #4070❤❤❤❤
Thanks for commenting!
Wow! I hope my legacy lives half as long. Geesh.
That is REALLY - REALLY COOL on that 80s video. It has that "classic" movie style to it - and in Full Technicolor.. or Kodak, or some shit.
Thanks for sharing this treasure - #RailfannersRock
th-cam.com/video/lO0wNUTcbws/w-d-xo.html
I ❤ The Great 👍 Video Shots 😊
Thank You for commenting.
I went on this train ride excursion as a young kid in the 1960`s.I think it was Cleveland to Akron Oh.
There were some B&O special trains operated in the 1950s and '60s in the Valley. Sometimes special trains were operated Cleveland to Akron then on to Chardon on the Lake Branch to the Maple Festival. The 4070 did not begin operations until 1975. Thanks.
I hope she returns someday
The Old 2 Story Control Tower ❤It 😊
Would be nice if 4070 ran on Hocking valley scenic trackage
This is an awesome video, but it could be so much better with stabilization applied.
Thank You! A while back I used the default TH-cam image stabilization and it looked awful. Like I was watching through a Lava Lamp!
Now that you suggested it I found that the Premiere Elements I use to edit has much better control. I'll use it on my upcoming 4070 video and when time permits replace this one with an image stabilized video.
Fun video! Where is the 4070 now?
RIP (Resting In Pieces) at the old B&O roundhouse on W. 3rd. St. in Cleveland, Ohio. Thanks!
@@gmpullman Any hope of reassembly and getting into steam?
@@BadlandNP Lots of enthusiasm but, sadly, little capital or resources.
th-cam.com/video/x26Gx6bEER8/w-d-xo.html
It would be great if CVSR would sponsor it's rebuild, since it served as such an integral part of the Valley Lines beginnings over those early years.
Just so we’re clear: Cuyahoga is pronounced “Kai-Ya-Hog-Ah.”