Having assisted on a Insignia clutch replacement I know whats involved . I was pleased when it was completed ,what a proper chew on it was , and that was 2 people !!!! This man has my total respect . Best of luck with your business Kevin .
Thought I'd leave it a while before commenting... The car being worked on is My car - it's a bit cleaner these days!! I've just rolled 182,000 miles and since the clutch was fitted, I've done 10-12,000 miles. Still operates like new, really pleased with the job. Kevin, you are the man!! Thank you, I'll see you at 340,000 miles 😎😎
I watched your video before tackling my partners dci qashqai, and now I'm watching this video before doing my insignia cdti 😅 brilliant work it's harder than you'd think on the drive way but I manged to get the qashqai done in around 5 hours with loads of stops for the rain and fairly basic tools. Saved hundreds and the car is fantastic now. Cheers.
I found you through work, i had to do a clutch on a Vw Transporter and your video was very helpfull :) no one believed like 95% could be done underneath the car.
To do a monster job like that on someone's driveway you are an awesome mechanic !! Brilliant video, I can appreciate how hard that must of been to film also. 👌🏻
I followed this video when I did mine with a one different i reverse bled the system, gave a much better clutch pedal. One other thing doing it this way your wheel alignment may be out slightly after re fitting the subframe. All in all not to bad of a job if you budget a day as a DIY mechanic !! You make it look easy oh an the gearbox is bloody heavy
getting you to do that clutch on that car and not the garage to do the work saved that customer a fair bit of money £££ kevin , big thumbs up buddy👍👍👍👍
I would like to express a great big thanks to Kevin’s. I’ve been chatting to him recently regarding a clutch and dmf I replaced. Very helpful, he’s a wealth of knowledge and wouldn’t be second-guessed. Book him for your mechanic works!!! Thanks again Kevin, up most respect! 👊🏻
Great video pal. I used to do jobs like that on my back but as the years started stacking up, the body started to complain. Long may you stay physically fit enough before the lure of a ramp takes over. Cheers
Hi kevin.just done 1 on the ramp.that rear starter bolt is a pain.i had to take the box out completely to fit a new crank seal..horrible job.well done on the floor again.
Thank u. Great video. I'm assuming the battery was dead before u disconnected the starter cables. Would have shorted otherwise. Once again great video mate.
Hi David.., I didn’t have to do that. As you probably know the steering column has about 10cm give in the sliding part of the column. Which is more than enough to compensate for the drop. Thanks 🍻🍻
Hi Kevin, do you need to use the self adjusting tool kit on this? Does it not affect it? Took me about two days todo this 😂 I’m trying to follow in your steps! Would it be possible to work with you for a week?
Great job, I discover your work. Everything seems nice and easy. For information, the operation looks pretty similar on SAAB 93 (and maybe 95) for Diesel engines (TTID and TID). Especially the parts bellow the car (the battery tray is pretty different... but not difficult).
Nice work absolutely great camera work, Just a curiosity how much would it cost for my insignia to be done with a new clutch exactly same model as this one just for future reference thanks.
Hi Kevin just found your video and it was great learning new knowledge. I own a 2011 2.0 diesel insignia and earlier in the evening my clutch got failed. Through my little knowledge I found no leaks anywhere, completely dry under and last week only my car passed road test. I am no mechanic but I was wondering if it can be only a master cylinder problem? Please share some guidance before I take it to mechanic. 🙏🏼
Another great video! I was wondering about my car... I've recently replaced a drive shaft (near side) and I'm sure my engine mounts are going or worse, the reason for this i'm also sure is because the DMF is slightly out so over vibrating on starting the engine, it doesn't shake violently on start-up but I think over the past 18 months the constant wreching because the DMF is out with the starter on start-up has rattled the heck out of the engine mounts? What do you reckon, is a whole clutch kit replacement the way to go or just the DMF? Your help would be immensely appreciated. Thanks again. Jem.
@@WMCS O.K cool, I'll be organising something for after xmas I think, I don't see the point in changing the engine mounts and then leave the clutch as is if it's going to keep rattling like heck. i'll let you know, the car will and does drive OK so would get me to meeting point to maybe take the long drive out of the equation of you were to fit the new kit?
Did you get this sorted? After I had DMF replaced mine rattled on start up. Garage said it would settle down. Stupidly I left it and it's still same now 18mths later! No issues with it apart from that rattle as engine fires up.
@@nickbell8634 I'm havintg the engine mounts done at a garage now mate, I''ll let you know if there's a difference ove the next few days. I'll have the car back tomorrow I think? As I say, Im pretty sure now it's th engine mounts, KAW replied in another similarly related comment of mine, saying that he was sure ity was the engine mounts, also saying that it is very rare that DMF's fail hat way.
@@jemmace2586 That would be great to know. Mines on 170k miles now, had DMF changed at 103k but rattle on start up has been there ever since. If mounts I might consider changing.
Do you ever come away from a job then think did I tighten a certain part up ? I’ve been a mechanic for 20 years and seem to be getting worse for this, if I go back and check I always have tightened it but sometimes can’t remember doing it.
Hi Kevin still a great job in the cold of winter, I hope you told your client that there are car wash centers :) I can't wait to see an alfa romeo 156 1.9 jtd 115 video.
Great job, may i ask what the white paste on the csc and the red on the boolt holes was? Also the clutch pedal on my insignia has dropped to the floor and wont return by itself, is this likely to be the salve cylinder? Thanks
Not just a clutch replacement but he DMF as well !!! you forgot to mention this buddy !!! a common one to go on insignias and can stop the engine from turning over often misdiagnosed as engine seazed.
It was a bit long winded but one of my preferred repairs. The DMF had seized up solid and causing a constant judder whilst pulling off and shaking on idle.
I took a look at your video list...and it's almost endless...I reckon you gotta have super developed neck and back muscles by now!!😁 Wouldn't you prefer doing this work on a lift?
Working on a lift is so strenuous ,, too much pressure on body standing up. Shoulder., back., elbow., Laying down for me is where the longevity of this career is 😁🍻.,, I think I’d miss the fresh air if I was indoor. I left a main dealership for this .,
Tom great idea! and Kevin the Zafira Tourer C is way different than the old B Modell - actualy not listed yet and maybe not possible to change that easy
As much as I value that impact wrench the battery is held together by 4 iPhone sized screws .,, so I’ve had to super glue. Elastic band and duck tape that sucker otherwise it keeps coming apart 😁✨✨🍻
Great video, thanks for sharing 👍 Just replace my clutch after watching this and it went well but I'm having real trouble bleeding it. Any suggestions would be appreciated 🙂
@@WMCS its all connected back up and there are no leaks. I've tried getting someone to pump the pedal and I've tried pressure bleeding, the pedal feels ok but the clutch is not disengaging. Even took the gearbox back off and changed the slave cylinder to be certain it was ok. Thanks for getting back to me
Bravissimo. Ottimo lavoro.. e bel video (senza quella maledettissima musica di m...da..sotto fondo che fa venire il mal di testa...)mi somigli molto come lavoro io..saluti Italy.sicilia.palermo
It’s a special sealant that will stop the rubber disintegrating over time which is a cause for oil leak through the gearbox For repair cost send your details via www.williamsmobileclutch.co.uk
Hi kevin i noticed you dont use your quick jack vehicle lift anymore is there any reason for that as i was thinking of getting one you see. do you not rate them whats your personal opinion on them as you have experience using one
Hey Mike. I still use it, but only for RWD vehicles. As it’s a lot better for all wheels up in the air. But for FWD it’s a lot quicker for me to just jack up the front wheels., I still rate the quick jack. If ever I move in a workshop I’ll be using it everyday. ✨🍻🍻🍻
Hi Kevin, great job, was it easier for you to work on Passat then on Insignia when you compare both jobs on gear box? I have got a feeling it was quite straightforward to get gear box out on my B6,B7 than on this car, wasn’t? 👍
@@WMCS not bad, 👌I do understand what you mean, challenging works are always exciting. I hope you are ok. Keep your self warm and safe. Thanks again for this great video.🍻👍
Hi, help would be very welcome, replaced 2013 insignia clutch with a struggle as I am 75, big problem is all back together but now don`t have reverse 5th or 6th gear. what have I missed? selects 1 -4 ok. both cables clipped in place on gearbox. does the gear lever have to be in a certain position before connecting cables back on gearbox?
@@WMCS thank u my friend, saved me a lot of head scratching, easily pushed in when removing box as you know, great video, & if at 75 with dodgy hips, slipped disc & dislocated thumb can do it following your video, then anyone can. By the way I was fine before I started. 😀
I've watched this video several times and followed it to the letter. My gear box will not clear the subframe enough to be able to remove the clutch and flywheel. What am I missing?.
@@WMCS hello, i have completely removed both front sub fame bolts, ive a jack there for a bit of security. the back one is in by a thread. i cannot get the gear linkage past the chasis for love nor money. Could i remove the gear selector from within the box to give me more room?
Oh my good so all the times I’ve dropped sub frames I didn’t need to ! Admittedly I’ve not done one of these but done zafira ones and Astra’s. I Feel kinda silly lol
Having assisted on a Insignia clutch replacement I know whats involved . I was pleased when it was completed ,what a proper chew on it was , and that was 2 people !!!! This man has my total respect . Best of luck with your business Kevin .
You are totally the best 💖
Thought I'd leave it a while before commenting... The car being worked on is My car - it's a bit cleaner these days!! I've just rolled 182,000 miles and since the clutch was fitted, I've done 10-12,000 miles. Still operates like new, really pleased with the job. Kevin, you are the man!! Thank you, I'll see you at 340,000 miles 😎😎
Did you figure out why your coolant level had dropped below minimum? Mine has done that before 👀 topped it ok and been ok since fingers crossed.
My 09 has 300,000 on the clock ⏰
I watched your video before tackling my partners dci qashqai, and now I'm watching this video before doing my insignia cdti 😅 brilliant work it's harder than you'd think on the drive way but I manged to get the qashqai done in around 5 hours with loads of stops for the rain and fairly basic tools. Saved hundreds and the car is fantastic now. Cheers.
I'm.a mechanic the last 21 years..hes one tidy mechanic..he does all this on his back on the side of roads..take a bow my son..
Well done Kevin. I couldnt believe my eyes how simple it looks when proffesionalyst do it...
I found you through work, i had to do a clutch on a Vw Transporter and your video was very helpfull :) no one believed like 95% could be done underneath the car.
To do a monster job like that on someone's driveway you are an awesome mechanic !! Brilliant video, I can appreciate how hard that must of been to film also. 👌🏻
I suppose doing it everyday it doesn’t feel that bad. Except when it’s raining then it takes a bit longer. Thanks for the feedback
I followed this video when I did mine with a one different i reverse bled the system, gave a much better clutch pedal. One other thing doing it this way your wheel alignment may be out slightly after re fitting the subframe. All in all not to bad of a job if you budget a day as a DIY mechanic !! You make it look easy oh an the gearbox is bloody heavy
Best mechanic man, awesome work. Many thank you's coming from turkey 🇹🇷
And that is why I love my e46... Jesus, the work needed just for the clutch... Congrats, man, nice job.
It’s not too bad really. Just a little bit more involved than the e46😆🍺
getting you to do that clutch on that car and not the garage to do the work saved that customer a fair bit of money £££ kevin , big thumbs up buddy👍👍👍👍
He was definitely happy with the price he had some spare for a tip ✨🍻. Hope you’re keeping well max. 🍻🍻
@@WMCS lol nice, all good mate👍
I would like to express a great big thanks to Kevin’s. I’ve been chatting to him recently regarding a clutch and dmf I replaced. Very helpful, he’s a wealth of knowledge and wouldn’t be second-guessed.
Book him for your mechanic works!!!
Thanks again Kevin, up most respect! 👊🏻
Thanks Brandon. Glad I could be of some small assistance ✨🍻🍻🍻
Thank you for all the trouble changing camera angles. I'm sure we have a better view than you in a lot of cases.
Very true a lot of the times I can’t even see it until I watch the vids 🍻✨😁
The man is a genius. Hope the works coming in for you.
Hey mark. Thanks for the support 🍻🍻✨
Outstanding as always, the ninja Clutch king
✨🍻🍻.,, thanks as always. Appreciate the support
Great video pal. I used to do jobs like that on my back but as the years started stacking up, the body started to complain. Long may you stay physically fit enough before the lure of a ramp takes over. Cheers
I’m sure the day will come when I’m inside on a ramp .., great to hear from a fellow mechanic
Hi kevin.just done 1 on the ramp.that rear starter bolt is a pain.i had to take the box out completely to fit a new crank seal..horrible job.well done on the floor again.
Thanks for the support,, I’m sure it all ended well for you 🍻🍻🍻🍻🍻
Phenomenal!!!!!!!!!
Edutainment at its very best.
Thank you!
Thanks for the support
Thank u. Great video. I'm assuming the battery was dead before u disconnected the starter cables. Would have shorted otherwise. Once again great video mate.
Hardcore Profi Mechaniker @work
Where is this mechanic located such a professional job he has done there such a great video to I’d like him to do my insignias clutch
The best mechanic in UK ! Thanks for sharing ! Respect man ! Have a good day boss !
Nice mechanic equipment you bought. I like it a lot.
Awesome mechanic what's a great mechanic fair play to you. Do you carry out private works, need my gearbox doing
Great job did you have disconnect rack from column to pull subframe that far down cheers you make it look se easy
Hi David.., I didn’t have to do that. As you probably know the steering column has about 10cm give in the sliding part of the column. Which is more than enough to compensate for the drop. Thanks 🍻🍻
👍
True master at work , great video Kevin.👌👍
Hi Kevin, do you need to use the self adjusting tool kit on this? Does it not affect it?
Took me about two days todo this 😂 I’m trying to follow in your steps! Would it be possible to work with you for a week?
Whouaouww, great video great mechanic !!!
Très bon travail bien filmé on voit bien les étapes personnellement je trouve que c'est le remontage de la boîte l emboîtement qui est le plus galere
Merci
Great job, I discover your work.
Everything seems nice and easy.
For information, the operation looks pretty similar on SAAB 93 (and maybe 95) for Diesel engines (TTID and TID). Especially the parts bellow the car (the battery tray is pretty different... but not difficult).
9-5, both share same platform but Saab has longer wheelbase
Literally just had the same changed on my insignia! How long did that take you Kev?
Nicely done mate, i'd rather watch this than the tv.
Thanks James. Glad the videos are to your liking. 🍻✨✨
Nice work absolutely great camera work, Just a curiosity how much would it cost for my insignia to be done with a new clutch exactly same model as this one just for future reference thanks.
Hiya .., not that expensive send your registration to
www.williamsmobileclutch.co.uk
And I’ll do a quotation for you to keep.
Clutch job in hour and half, awesome as always👍
Thanks for sharing William I’ve to do one next week this really helped.... Top man 🛠🇮🇪👍👍
Watched a few of your vid's Kevin..............You are a machine!!.........Impressive work 👍
Thanks for the support Mark.
Really appreciate it.
Respect for his skills!!
Hi Kevin just found your video and it was great learning new knowledge. I own a 2011 2.0 diesel insignia and earlier in the evening my clutch got failed. Through my little knowledge I found no leaks anywhere, completely dry under and last week only my car passed road test. I am no mechanic but I was wondering if it can be only a master cylinder problem? Please share some guidance before I take it to mechanic. 🙏🏼
Really nice job. Sad to see that the car is so dirty. Horrible engine bay and the outside could use a really good wash with degreasing
Another great video! I was wondering about my car... I've recently replaced a drive shaft (near side) and I'm sure my engine mounts are going or worse, the reason for this i'm also sure is because the DMF is slightly out so over vibrating on starting the engine, it doesn't shake violently on start-up but I think over the past 18 months the constant wreching because the DMF is out with the starter on start-up has rattled the heck out of the engine mounts?
What do you reckon, is a whole clutch kit replacement the way to go or just the DMF?
Your help would be immensely appreciated.
Thanks again.
Jem.
Hi Jem.
Always the whole kit .,, otherwise it won’t work as it should ..✨🍻🍻
@@WMCS O.K cool, I'll be organising something for after xmas I think, I don't see the point in changing the engine mounts and then leave the clutch as is if it's going to keep rattling like heck.
i'll let you know, the car will and does drive OK so would get me to meeting point to maybe take the long drive out of the equation of you were to fit the new kit?
Did you get this sorted? After I had DMF replaced mine rattled on start up. Garage said it would settle down. Stupidly I left it and it's still same now 18mths later! No issues with it apart from that rattle as engine fires up.
@@nickbell8634 I'm havintg the engine mounts done at a garage now mate, I''ll let you know if there's a difference ove the next few days.
I'll have the car back tomorrow I think? As I say, Im pretty sure now it's th engine mounts, KAW replied in another similarly related comment of mine, saying that he was sure ity was the engine mounts, also saying that it is very rare that DMF's fail hat way.
@@jemmace2586 That would be great to know. Mines on 170k miles now, had DMF changed at 103k but rattle on start up has been there ever since. If mounts I might consider changing.
Do you ever come away from a job then think did I tighten a certain part up ? I’ve been a mechanic for 20 years and seem to be getting worse for this, if I go back and check I always have tightened it but sometimes can’t remember doing it.
Hansz I try and go over things twice it even three times ., but I know what you mean
Nailed it again Kevin as always :)
Hey Martin. Thanks for viewing the vids and feedback. 🍺🍺🍺
No worries always a pleasure to watch & realize what hard graft you do to pay the bills 👍
Hi Kevin still a great job in the cold of winter, I hope you told your client that there are car wash centers :) I can't wait to see an alfa romeo 156 1.9 jtd 115 video.
Exactly the same engine gearbox as the alpha .., no car wash 🧼 with lockdown 😁🍻✨
Just fantastic good job all the best Shaun
Thanks as always Shaun .,,
it was a documentary-like video 👍👏 👑👈
mate you are legend respect very helpful video thanks for sharing your knowledge 😀
Great video man, from a fellow mechanic
Thanks for the feedback. Means a lot coming from a fellow mechanic 🧰
The clutch king 👑
this was amazing, you surely know your expertise .
Thank you.
Hi kev.awsome video.great to see the fitting of the dmf and clutch etc.ur a top geezer.keep them comeing.
Hey Kevin. Thanks for the feedback.,, really appreciate it .,
Muy bueno ,excelente tus trabajos,Saludos desde argentina
✨✨🍻🍻
Great job plus a bit of night-shift.
Great job I see your a fan of Edd China because of the orange gloves.
I think Ed took inspiration from me 😂😁🤩
great video kevin canm i ask you a private question i got rounded off sump plug how would you get in off vehicle is astra j 2.0 cdti
Amazing how similar that car is to the 2014 Buick Regal I had (the Regal is really an Opel Insignia).
That’s the one mate. They’re all GM related.
Great job, may i ask what the white paste on the csc and the red on the boolt holes was? Also the clutch pedal on my insignia has dropped to the floor and wont return by itself, is this likely to be the salve cylinder? Thanks
Not just a clutch replacement but he DMF as well !!! you forgot to mention this buddy !!! a common one to go on insignias and can stop the engine from turning over often misdiagnosed as engine seazed.
Where did you get the trousers from bud? They look good.. Glad to see you're busy
They’re good for the cold weather. It’s a canvas material. You can find it on eBay.
Gorka 4 bars.,,
@@WMCS cheers kev
i watch your vidoes all the time you do a very profeesional job were are you located.
Hi Mike. I cover 100miles from Bedford in all direction ✨🍻🍻
hi Kevin, back onto the big stuff again, more room to work but seemed like a long job .. was this a failure or just friction plate worn out?
It was a bit long winded but one of my preferred repairs. The DMF had seized up solid and causing a constant judder whilst pulling off and shaking on idle.
@@WMCS thanks for the reply, do you know why it seized?
I took a look at your video list...and it's almost endless...I reckon you gotta have super developed neck and back muscles by now!!😁 Wouldn't you prefer doing this work on a lift?
Working on a lift is so strenuous ,, too much pressure on body standing up. Shoulder., back., elbow.,
Laying down for me is where the longevity of this career is 😁🍻.,,
I think I’d miss the fresh air if I was indoor. I left a main dealership for this .,
@@WMCS Makes sense!😉
Need my clutch and flywheel doing on my insignia.
Looks like a right pain in the ass job.
Cheapest quote ive had from a garage is £1500
I can beat that quotation
www.williamsmobileclutch.co.uk
Great job! How long did the repair take? In the end it is already dark.
Including filming about 5 hours. But I did start a bit later on in the day this one .., I think I finished about 05:00pm.
great job! any chance to see a Vauxhall Zafira Tourer > 2015 clutch replacement?
Tom have a browse through the channel. I’m sure there’s a couple in there
Tom great idea! and Kevin the Zafira Tourer C is way different than the old B Modell - actualy not listed yet and maybe not possible to change that easy
Do you ever use a pressure bleeder for these being on your own ?
Awesome job in record time. The dirko tube that you used for the back of the slave what was it? And what’s the red grease?
It’s a chemical sealant that helps the rubber to not get hard over time. Which is a cause for oil leak.
Whats the name of it mate i need one like that for my own replacement im looking to buy that please let me know
Hello again Kevin, was just wondering why the tape around the impact gun just out of pure curiosity also cracking video as always
As much as I value that impact wrench the battery is held together by 4 iPhone sized screws .,, so I’ve had to super glue. Elastic band and duck tape that sucker otherwise it keeps coming apart 😁✨✨🍻
Great video, thanks for sharing 👍 Just replace my clutch after watching this and it went well but I'm having real trouble bleeding it. Any suggestions would be appreciated 🙂
What’s happening with the clutch hydraulics. Be a bit more specific
@@WMCS its all connected back up and there are no leaks. I've tried getting someone to pump the pedal and I've tried pressure bleeding, the pedal feels ok but the clutch is not disengaging. Even took the gearbox back off and changed the slave cylinder to be certain it was ok. Thanks for getting back to me
Big up from French 🇫🇷 !! Thank’s 🔥🔥
how long did it take you to do this?
Bravissimo. Ottimo lavoro.. e bel video (senza quella maledettissima musica di m...da..sotto fondo che fa venire il mal di testa...)mi somigli molto come lavoro io..saluti
Italy.sicilia.palermo
the best ....congratulations from greece bro..
Hello. Love the videos. Have you changed the clutch on an Astra K/ mk7? Would love to see one of those done. Cheers.
Is it the 1.7 you’re after.
@@WMCS No. 1.6cdti. 2016 plate onwards. Seen you have done a 2.0ltr J. 👍
Hi " the Clutchinator" it's official you are the best
🤩🍿☕️.,, Thankyou.
Your a champion,thanks for upload👍
Super boulot mon ami 💪👍
2 questions what did you put around the bottom of the slave and what did you charge for this?
It’s a special sealant that will stop the rubber disintegrating over time which is a cause for oil leak through the gearbox
For repair cost send your details via
www.williamsmobileclutch.co.uk
Thats a great small but heavy hammer
Hola amigo me gusta tu video un salut de madrid
Saludos amigo 🍻🍻🍻
Very kind Kevin,
Hi kevin i noticed you dont use your quick jack vehicle lift anymore is there any reason for that as i was thinking of getting one you see. do you not rate them whats your personal opinion on them as you have experience using one
Hey Mike.
I still use it, but only for RWD vehicles. As it’s a lot better for all wheels up in the air.
But for FWD it’s a lot quicker for me to just jack up the front wheels.,
I still rate the quick jack. If ever I move in a workshop I’ll be using it everyday. ✨🍻🍻🍻
@@WMCS thanks for the feedback mate appreciate it 👍
The great clutches warrior 👍🏽
Hi m8….. what’s the grease that you used on the back of the slave please???
bonjour super vidéo comme d'habitude Kévin bravo 👌👍
Hi there, just of curiosity. What is the most common reason to change the clutch? Is it the clutch itself, or the DMF?
Mostly because of the DMF
@@WMCS thanks for your reply.
hello Kevin can i ask you something? is this fixed mass flywheel or little spinning?
My car is opel zafira tourer 2.0 cdti 170hp
Thnx ☺️
Thank you for the video!
What is the price for supply and fit out of curiosity and time taken?
www.williamsmobileclutch.co.uk
Thank you,very helpful.👍
Kevin whats the white paste on the slave? Grease or sealant?
Hi about to attempt the oil seal could you tell me what size the hub nut is please I believe its a 32mm
The centre nut doesn’t come out. But rather the small torx bolt around it.
@@WMCS don't I need to remove the osf drive shaft?
What is that liquid you spray on to clean that surface and flywheel?
Why did you add something around the slave and what was it please
Without looking at the video I would assume you’re referring to the red rubber grease
@@WMCS no not the rubber grease the silicone substance you put around the bottom of the slave that joins to the box
That’s oil resistant silicone sealant.so oil doesn’t get past it.
Hi Kevin, great job, was it easier for you to work on Passat then on Insignia when you compare both jobs on gear box? I have got a feeling it was quite straightforward to get gear box out on my B6,B7 than on this car, wasn’t? 👍
I prefer the Passat 😁🍻.,, but loved the challenge of vauxhall .,,
How are you doing anyway.
@@WMCS not bad, 👌I do understand what you mean, challenging works are always exciting. I hope you are ok. Keep your self warm and safe. Thanks again for this great video.🍻👍
Klobúk dole bráťte. 👌
Hi, help would be very welcome, replaced 2013 insignia clutch with a struggle as I am 75, big problem is all back together but now don`t have reverse 5th or 6th gear. what have I missed? selects 1 -4 ok. both cables clipped in place on gearbox. does the gear lever have to be in a certain position before connecting cables back on gearbox?
There’s a black push lock lever on the side of gearbox selector.
Pull it out.
@@WMCS thank u my friend, saved me a lot of head scratching, easily pushed in when removing box as you know, great video, & if at 75 with dodgy hips, slipped disc & dislocated thumb can do it following your video, then anyone can. By the way I was fine before I started. 😀
I've watched this video several times and followed it to the letter. My gear box will not clear the subframe enough to be able to remove the clutch and flywheel. What am I missing?.
A bit of twist and turn.
Maybe slacken the other side a bit 🤏
@@WMCS hello, i have completely removed both front sub fame bolts, ive a jack there for a bit of security. the back one is in by a thread. i cannot get the gear linkage past the chasis for love nor money. Could i remove the gear selector from within the box to give me more room?
nice video mate
Oh my good so all the times I’ve dropped sub frames I didn’t need to ! Admittedly I’ve not done one of these but done zafira ones and Astra’s. I Feel kinda silly lol
You can even fully remove the box with the subframe partially down. Just a different technique.
Did this Insignia not have a self adjusting clutch ?
What is the paste that you are applying on the bearing? What is it for. A sealant or grease?
Grease
hello what product to clean the clutch thank you
Very good job
To the France mecanik ;)
Brake cleaner .,,
@@WMCS
Do you have a reference
Thank you
Sory
Good job mate
🍻🍻✨🍿