Please note: Someone just pointed out that I mistakenly called out "4x4" v-flats when what I meant to say was "4x8" v-flats. So FYI for the record 2 4x8 foot v-flats are what I used.
Hey Michael! Thanks for the great info. For the 8x8 scrim that you used, was it full stop, 1/2 stop, or 1/4 stop diffusion? When I look for the scrim jim it has those different levels of diffusion but I really like the look that you had here for your images. Thanks!
you can also do this w/a Octabox over 6ft from Elinchrom or ProFoto if you put inner and outer diffuser, correct? That should wrap light around the subject.
I haven't tried that but in my opinion as 2 4x8' v-flats and an 8x8 scrim are creating a massive broad source they'll do a better job creating this effect. Give umbrellas a try and let me know how it goes.
Hi there, I was wondering- I only have three lamps (500w) but also wistro ad180, could I add this to the bunch and just power it up to full power to make it the forth one?
It's flexible and that varied. The more space you have the better. This shoot was accomplished in a 21x23' foot space. Sometimes the model was very close to the scrim and other times 8-10' feet away.
You said the V flats were 4x4' but they look like 4x8' in the photo. 4x8' would make more sense if your scrim is 8x8'. Since you said the Profoto packs were turned way down would it have worked just as well with one pack and only two heads? Did you put anything on the top of the scrim and V flats?
Good catch, thats my bad! 4x8 is what I meant to say. 2 4x8 flats are what I used. Two lights would be difficult to make work regarding even top to bottom full figure light coverage, thats where stacking 2 heads in each corner is key.
Beautiful and very informative! super nice look! I also loved your b&w conversion, very nice and smooth. Do you use any special plug in or method to achieve it ? thanx from Italy
Hi Claudio! Thank you for your kinds words, glad you enjoyed the tutorial and images. Regarding the black and white conversion it was done using one of the presets in Capture One Pro 10 and then adjusted to fine tune.
Do you cover the top of the vflats to control the spill over the top?
A breath if fresh air! Thank you for posing and explaining. Going to put this to use!
Great job and thank you for showing us.
Thanks for all your videos explaining how you work with lights, much appreciated!
Can I ask what focal lengths you shot with?
Before I forget excellent post. Thank you
Thank you!
Brilliant breakdown. Subscribed
Great tip, beautiful results! Thanks!
Thank you!
Please note: Someone just pointed out that I mistakenly called out "4x4" v-flats when what I meant to say was "4x8" v-flats. So FYI for the record 2 4x8 foot v-flats are what I used.
Can you provide a link to the exact scim you are using please? I bought a westcott 3/4 stop and its basically transparent, not much diffusion
Nice lighting and demo. Thank you.
Thank you!
Hey Michael! Thanks for the great info. For the 8x8 scrim that you used, was it full stop, 1/2 stop, or 1/4 stop diffusion? When I look for the scrim jim it has those different levels of diffusion but I really like the look that you had here for your images. Thanks!
Hey Joe! I was using a Sunbounce 2/3 stop screen.
you can also do this w/a Octabox over 6ft from Elinchrom or ProFoto if you put inner and outer diffuser, correct? That should wrap light around the subject.
If you don't want to use the v flat but use 2 umbrella on each side of 8 or 10 foot silk
Light will still very soft. What is your opinion?
I haven't tried that but in my opinion as 2 4x8' v-flats and an 8x8 scrim are creating a massive broad source they'll do a better job creating this effect. Give umbrellas a try and let me know how it goes.
Great video! Do you use the scrim sun bounce 2/3, 1/3 or 1/5th?
2/3!
Hi Michael this is really great. I was wondering what power setting do you have the lights at if they are 1000s? Full , medium, low?
The power setting will depend on your desired aperture. In the studio I typically meter for light between f11-f16.
Hi there, I was wondering- I only have three lamps (500w) but also wistro ad180, could I add this to the bunch and just power it up to full power to make it the forth one?
Do you think this would work with only 3 foam boards and a 4x8 foot scrim?
What camera setting was on these images?
Roughly how big of a space do I need to pull the lighting setup off? How much space is between the model and the lighting setup?
It's flexible and that varied. The more space you have the better. This shoot was accomplished in a 21x23' foot space. Sometimes the model was very close to the scrim and other times 8-10' feet away.
What camera and lens did you use for this shoot? I particularly like the full body image with slight distortion that provides the fashion-esque look
I believe it was an 80mm on a medium format body with a .3x crop factor sensor, so around 100mm.
You said the V flats were 4x4' but they look like 4x8' in the photo. 4x8' would make more sense if your scrim is 8x8'.
Since you said the Profoto packs were turned way down would it have worked just as well with one pack and only two heads?
Did you put anything on the top of the scrim and V flats?
Good catch, thats my bad! 4x8 is what I meant to say. 2 4x8 flats are what I used. Two lights would be difficult to make work regarding even top to bottom full figure light coverage, thats where stacking 2 heads in each corner is key.
Beautiful and very informative! super nice look! I also loved your b&w conversion, very nice and smooth. Do you use any special plug in or method to achieve it ? thanx from Italy
Hi Claudio! Thank you for your kinds words, glad you enjoyed the tutorial and images. Regarding the black and white conversion it was done using one of the presets in Capture One Pro 10 and then adjusted to fine tune.
Super helpful. Thank you!
Would have loved an affiliate link to the Kupo clamps (get you paid in the process)
Can you do this with a octabox or an indirect litemotiv from elinchrom?
For this particular technique nothing beats a scrim.
Muchas gracias!
Thanks Jose!
THANK YOU SIR!!!!!!!!!!
great info being shared here
Thank you!
Great Video. Could this be accomplished by using 4 alien bees?
Yes!
What is the shade of gray that you are using on the background?
It was shot on white cyc wall. It appears light gray because I didn't light it separately.
The first thing I thought when I saw that picture was, hmmm no catch light in her eyes??
This is so much nicer.
Thanks for explaining and sharing.
Thank you!
SUPER. SUPER , THE BEST
நன்றாக இருக்கிறது வாழ்த்துக்கள் R.MANOHAR-CHENNAI
Why dont you have editing techqunies like Sal Sincotta edits???
?